« previous next »
Pages: [1]   Go Down

Author Topic: fairing edging removal  (Read 452 times)

0 Members and 1 Guest are viewing this topic.

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,216
fairing edging removal
« on: December 04, 2013, 06:57:54 AM »
any advice on how to remove the edging from a vetter windjammer and lowers?  have road rash damage to be repaired.   allready sourced new edging from vetter themselves.
Logged
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,623
  • Endeavor to persevere
Re: fairing edging removal
« Reply #1 on: December 04, 2013, 07:44:09 AM »
I believe it's just held in place with adhesive, some gentle heat (you don't wan't to damage the ABS and careful prying should get it off. You can e-mail Vetter himself via his website for advice.
Logged
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,216
Re: fairing edging removal
« Reply #2 on: December 04, 2013, 03:23:30 PM »
wound up using a heat gun and gloves and pliers     this is some very foul smelling junk when its heated up enough to actually melt the glue.
Logged
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E
Pages: [1]   Go Up
« previous next »