« previous next »
Pages: 1 [2] 3 4   Go Down

Author Topic: a few things you need to remove from your bike  (Read 12921 times)

0 Members and 2 Guests are viewing this topic.

Offline Sgt.Pinback

  • Expert
  • ****
  • Posts: 820
Re: a few things you need to remove from your bike
« Reply #25 on: December 05, 2013, 10:35:09 pm »
Quote from: bender01 on December 05, 2013, 04:26:44 pm
Drill the frame full of holes for an erector set look! Then drill holes in everything left!

....and dont forget your helmet!
Logged
Doc, I love a motorcycle!

Offline redrider736

  • Enthusiast
  • **
  • Posts: 168
Re: a few things you need to remove from your bike
« Reply #26 on: December 05, 2013, 11:56:19 pm »
Quote from: andrewk on December 05, 2013, 03:19:10 pm
Don't forget to hack off any kind of mounting tab so everything hangs off of zip ties!

LMFAO !!!!!!!!
Logged
78' CB550k (Not Run'n / Basket Case Project)
77/78 cool 2 member #269

Offline evanphi

  • Apparently I'm an
  • Old Timer
  • ******
  • Posts: 3,107
  • Rhonda the Basket Case
Re: a few things you need to remove from your bike
« Reply #27 on: December 06, 2013, 05:32:14 am »
Don't forget to add speed holes!
Logged
--Evan

1975 CB750K "Rhonda"
Delkevic Stainless 4-1 Header, Cone Engineering 18" Quiet Core Reverse Cone, K&N Filter in Drilled Airbox
K5 Crankcase/Frame, K4 Head and Cylinders, K1 Carbs (42;120;1 Turn)

She's a mix-matched (former) basket case, but she's mine.

CB750 Shop Manual (all years), searchable text PDF
Calculating the correct input circumference for digital speedometers connected to the original speedometer drive

Offline Sgt.Pinback

  • Expert
  • ****
  • Posts: 820
Re: a few things you need to remove from your bike
« Reply #28 on: December 06, 2013, 05:49:14 am »
« Last Edit: December 06, 2013, 05:56:15 am by Sgt.Pinback »
Logged
Doc, I love a motorcycle!

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,833
Re: a few things you need to remove from your bike
« Reply #29 on: December 06, 2013, 05:54:24 am »
Quote from: andrewk on December 05, 2013, 03:19:10 pm
Don't forget to hack off any kind of mounting tab so everything hangs off of zip ties!


You mean like this in the picture...................................:
Logged
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,454
  • Saver of unloved motorcycles.
Re: a few things you need to remove from your bike
« Reply #30 on: December 06, 2013, 09:24:08 am »
Taillight, License plate bracket and plate, when this thing is light enough the cops can't catch ya anyway. No need for exhaust pipes except the first 8" or so, just so you don't burn the front tire off.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 I smell like Lilacs, I've got glitter on my cheeks and it's all Joe's fault, he told the stripper it was my birthday.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,454
  • Saver of unloved motorcycles.
Re: a few things you need to remove from your bike
« Reply #31 on: December 06, 2013, 09:27:45 am »
Oil tank, just hook the hoses together. Dump the oil in the tappet cover just like your car. You can really clean up those handlebars if you leave the front brake off too.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 I smell like Lilacs, I've got glitter on my cheeks and it's all Joe's fault, he told the stripper it was my birthday.

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,776
Re: a few things you need to remove from your bike
« Reply #32 on: December 06, 2013, 09:37:44 am »
Helium in the tire tubes.....................
Logged
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: a few things you need to remove from your bike
« Reply #33 on: December 06, 2013, 09:42:08 am »
since we wont be riding in the rain, as the resistance from the rain droplets decreases overall speed, we could get rid of the points cover.... ;D
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline FrankenFrankenstuff

  • Master
  • *****
  • Posts: 2,384
    • FrankenBike Stuff Store
Re: a few things you need to remove from your bike
« Reply #34 on: December 06, 2013, 09:55:16 am »
I feel bad. Was this a legit question of what can be removed? Or just a jab at all of those that have removed too much? Either way it is a frigging funny read.

I like LesterPiglets idea of removing every other spoke!
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: a few things you need to remove from your bike
« Reply #35 on: December 06, 2013, 10:17:24 am »
Quote from: 74750k4 on December 05, 2013, 10:43:40 am

so easy to make it look cool, and light weight.

Start of list...

Fenders
Gauges, and their cables
Turn Signals
Mirrors
Stock Headlight Bucket, and the Wire Harness
The Air Box
Stock pipes, and the frame piece that has the rear pegs. Got hacksaw?

What else???

How about the big weighty lump attached to the seat, handle bars, and foot pegs?  Don't even need a hacksaw, unless rigor has set in.
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: a few things you need to remove from your bike
« Reply #36 on: December 06, 2013, 10:30:03 am »
By all means take the front disk and brake off.....

Its big ugly and heavy.

Rear drum will work fine......
Logged
Stranger in a strange land

Offline lone*X

  • Expert
  • ****
  • Posts: 1,126
Re: a few things you need to remove from your bike
« Reply #37 on: December 06, 2013, 11:16:12 am »
Kghost, rear drum would be even lighter if you take the shoes out and toss them.
Logged
Lone*X  ( Don )

75 CB550K1  
VTX1800C for two up cruisin.
Several others have come and gone but whose keeping track.
52 years on two wheels and counting.....
"The best safety feature of any motorcycle is the one God put between your ears.  It's also the least utilized"

Offline Clasico

  • Full Member
  • *
  • Posts: 50
  • CB500 Four K1
Re: a few things you need to remove from your bike
« Reply #38 on: December 06, 2013, 01:09:19 pm »
You should take out all the watercooling plumbing, ABS and travel bags
Logged
Carpe Diem

Offline Davez134

  • Expert
  • ****
  • Posts: 1,485
Re: a few things you need to remove from your bike
« Reply #39 on: December 06, 2013, 01:09:48 pm »
Quote from: lone*X on December 06, 2013, 11:16:12 am
Kghost, rear drum would be even lighter if you take the shoes out and toss them.
Exactly.  You can just slow down like a bmx rider, use the friction of your shoe against tire.  :) ;)
Logged

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: a few things you need to remove from your bike
« Reply #40 on: December 06, 2013, 01:12:35 pm »
Quote from: Davez134 on December 06, 2013, 01:09:48 pm
Quote from: lone*X on December 06, 2013, 11:16:12 am
Kghost, rear drum would be even lighter if you take the shoes out and toss them.
Exactly.  You can just slow down like a bmx rider, use the friction of your shoe against tire.  :) ;)

Fred Flintstone that sucker.......
Logged
Stranger in a strange land

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,554
  • Gusto mo titi ko?
    • project
Re: a few things you need to remove from your bike
« Reply #41 on: December 06, 2013, 01:35:18 pm »
How much is too much, and how much is too little?  Everyone's got ideas, everyone's got opinions, whose is right, and whose is wrong? 
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: a few things you need to remove from your bike
« Reply #42 on: December 06, 2013, 01:40:43 pm »
Quote from: Medyo Bastos on December 06, 2013, 01:35:18 pm
How much is too much, and how much is too little?  Everyone's got ideas, everyone's got opinions, whose is right, and whose is wrong?

The officer that pulls you over for not having required equipment on public roads.  ..Or the judge in court.
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: a few things you need to remove from your bike
« Reply #43 on: December 06, 2013, 01:59:06 pm »
or the undertaker lol
Logged
Stranger in a strange land

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 33,962
  • Central Texas
Re: a few things you need to remove from your bike
« Reply #44 on: December 06, 2013, 02:58:34 pm »
Quote from: lone*X on December 06, 2013, 11:16:12 am
Kghost, rear drum would be even lighter if you take the shoes out and toss them.

Don't forget the brake lever, surely you won't need that.
Logged
'74 "Big Bang" Honda 750K [836].....'71 Honda 750K project.....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline 750K

  • Expert
  • ****
  • Posts: 1,392
Re: a few things you need to remove from your bike
« Reply #45 on: December 06, 2013, 07:41:03 pm »
I lost 35lbs last year, I didn't notice my bike get any faster. It pulls harder and gets up to speed quicker but I don't think it goes any faster then when I was a fat ass.
Logged
77 Cb750, 78 Kz1000

Offline kghost

  • Really Old Timer ...
  • *******
  • Posts: 6,855
  • www.facebook.com/RetroMecanicaAustralia
Re: a few things you need to remove from your bike
« Reply #46 on: December 06, 2013, 09:17:18 pm »
I'm not sure why you need handlebars......

One could just grab the fork tubes......
Logged
Stranger in a strange land

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,311
  • Bike almost back to the 70's 2015
Re: a few things you need to remove from your bike
« Reply #47 on: December 06, 2013, 11:15:38 pm »
It's the other way today compared with 30-40 years ago. CB750 SOHC OEM style is very beautiful, it is a shame to cut and abuse the wonderful looking bike. Keep the complete CB750 intact. Another thing if building a bike of parts.

If I can find a good flowing 4-4 exhaust system, my 4-1 will go. Time for exhaust builders to produce 4-4 systems looking like OEM but with thicker pipes like the 4-1 have.
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,687
Re: a few things you need to remove from your bike
« Reply #48 on: December 06, 2013, 11:50:10 pm »
Quote from: kghost on December 06, 2013, 09:17:18 pm
I'm not sure why you need handlebars......

One could just grab the fork tubes......
+1, handlebars are for fags
Logged
If it works good, it looks good...

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 33,962
  • Central Texas
Re: a few things you need to remove from your bike
« Reply #49 on: December 07, 2013, 06:40:10 am »
Quote from: seanbarney41 on December 06, 2013, 11:50:10 pm
Quote from: kghost on December 06, 2013, 09:17:18 pm
I'm not sure why you need handlebars......

One could just grab the fork tubes......
+1, handlebars are for fags

Then, for fun, you could remove the footpegs too! 
Logged
'74 "Big Bang" Honda 750K [836].....'71 Honda 750K project.....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........
Pages: 1 [2] 3 4   Go Up
« previous next »