« previous next »
Pages: [1]   Go Down

Author Topic: Conical Clutch Washer  (Read 584 times)

0 Members and 1 Guest are viewing this topic.

Offline dlhoulton

  • Enthusiast
  • **
  • Posts: 177
Conical Clutch Washer
« on: December 05, 2013, 01:41:19 PM »
Does anyone have a source for the Conical clutch washer? The bike is a 77 CB750. The part is #14 on the provided schematic.
Logged

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,274
Re: Conical Clutch Washer
« Reply #1 on: December 05, 2013, 01:50:33 PM »
Ebay, Bill Benton, Stev-o, Me

I'm holding on to my spare tho, sorry
Logged
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline dlhoulton

  • Enthusiast
  • **
  • Posts: 177
Re: Conical Clutch Washer
« Reply #2 on: December 05, 2013, 03:15:56 PM »
Could anyone that has one provide the measurements.
Logged

Offline dlhoulton

  • Enthusiast
  • **
  • Posts: 177
Re: Conical Clutch Washer
« Reply #3 on: December 08, 2013, 08:00:11 AM »
What are the experts thoughts on using a "Lock Washer 16mm" from another style/model Honda bike? They are used for the same purpose, (used in clutches and behind the special lock nut). They are available and if you search them on ebay you will see that they have stamped on one side "OUT SIDE". My only concern is there thickness. But as stated they are used on lots of Honda clutches and for the same purpose.
Here is a link to the part. It is part #1
http://www.motosport.com/cruiser/oem-parts/HONDA/2006/REBEL-_-CMX250C/CLUTCH

Here is a link to an ebay listing:
http://www.ebay.com/itm/NOS-HONDA-CB250-CMX250-XR250-CRF230-LOCK-WASHER-15451-KR3-601-/200679695712?pt=Motorcycles_Parts_Accessories&hash=item2eb9712560&vxp=mtr
« Last Edit: December 08, 2013, 08:06:29 AM by dlhoulton »
Logged
Pages: [1]   Go Up
« previous next »