« previous next »
Pages: [1]   Go Down

Author Topic: Mikuni RS 34 questions  (Read 1460 times)

0 Members and 1 Guest are viewing this topic.

Offline Roland

  • Building a vintage bike scene in Colorado Springs one bike at a time.
  • Enthusiast
  • **
  • Posts: 104
    • Seven Minute Customs
Mikuni RS 34 questions
« on: December 28, 2013, 01:27:24 pm »
Finally getting around to familiarizing myself with my new Mikuni RS 34's and I have a few questions.  First question is, what are these and where do they go?
Logged

Offline Roland

  • Building a vintage bike scene in Colorado Springs one bike at a time.
  • Enthusiast
  • **
  • Posts: 104
    • Seven Minute Customs
Re: Mikuni RS 34 questions
« Reply #1 on: December 28, 2013, 01:30:56 pm »
Next question is, shouldn't there be caps or vent lines on these ports?
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,548
  • Big ideas....
Re: Mikuni RS 34 questions
« Reply #2 on: December 28, 2013, 01:33:54 pm »
Quote from: Roland on December 28, 2013, 01:30:56 pm
Next question is, shouldn't there be caps or vent lines on these ports?
No
Logged
Owner of the "Million Dollar CB"

Offline joesmotos

  • Enthusiast
  • **
  • Posts: 213
Re: Mikuni RS 34 questions
« Reply #3 on: December 28, 2013, 08:58:26 pm »
I think(which is a stretch) that MAYBE those cylindrical parts are part of the accelerator system?As in,they go in the float bowl?
Maybe?
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,548
  • Big ideas....
Re: Mikuni RS 34 questions
« Reply #4 on: December 29, 2013, 04:42:34 am »
They are float bowl vent tubes
Logged
Owner of the "Million Dollar CB"

Offline joesmotos

  • Enthusiast
  • **
  • Posts: 213
Re: Mikuni RS 34 questions
« Reply #5 on: December 29, 2013, 10:09:21 am »
Just so not to confuse,what i meant was the parts shown in the very first picture he posted of the 4 individual cylindrical pieces..like a plunger of some sort.Maybe i will stop with the replies now lol..
Logged

Offline Roland

  • Building a vintage bike scene in Colorado Springs one bike at a time.
  • Enthusiast
  • **
  • Posts: 104
    • Seven Minute Customs
Re: Mikuni RS 34 questions
« Reply #6 on: December 29, 2013, 11:02:18 am »
Thanks for the replies.  Those cylinders were in the box with the carbs but not inside the carbs.  There is no mention of them on the exploded view in the book that came with them.  I disassembled one of the carbs and there is a spot where I can see that they might go but I cannot figure out what the purpose of them could possibly be.  There has to be someone out there that has these exact carbs and knows what they are for, right?
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,548
  • Big ideas....
Re: Mikuni RS 34 questions
« Reply #7 on: December 29, 2013, 11:25:03 am »
Those four pieces are for another bike application. Mikuni supplies odds and ends with the larger carbs for the old GSXR's Kawasaki's etc. No need for anything other than carbs for the CB750. ;)
Logged
Owner of the "Million Dollar CB"

Offline Roland

  • Building a vintage bike scene in Colorado Springs one bike at a time.
  • Enthusiast
  • **
  • Posts: 104
    • Seven Minute Customs
Re: Mikuni RS 34 questions
« Reply #8 on: December 29, 2013, 12:02:35 pm »
Quote from: MRieck on December 29, 2013, 11:25:03 am
Those four pieces are for another bike application. Mikuni supplies odds and ends with the larger carbs for the old GSXR's Kawasaki's etc. No need for anything other than carbs for the CB750. ;)
Great, thank you!
Logged
Pages: [1]   Go Up
« previous next »