« previous next »
Pages: [1]   Go Down

Author Topic: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.  (Read 1430 times)

0 Members and 3 Guests are viewing this topic.

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« on: December 10, 2013, 11:28:08 AM »
I've been having trouble finding All Balls tapered bearing kits for the 750 where both the top and bottom bearings are tapered, as shown in Hondaman's book. Been looking on ebay and the only kit from All Balls that fits a K2 is 

This one

and the ones that have both top and bottom ones tapered aren't from All Balls like

This one

So the question is, has anyone found a kit from All Balls with both bearings tapered? If so, where can I grab one of those from?
Logged

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,090
  • Sunny Central Florida
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #1 on: December 10, 2013, 11:42:58 AM »
Yuhaaahhhh....The inner face of the races (bearings too) are tapered. The outer face of the races (top, bottom, sides) are flat. Find your favorite tapered wheel bearing (automotive, trailer, truck) and place the tapered bearing into it's outer race and all of the outer faces are flat, yet the bearings are still tapered.  ???

How's that work?  ???

(Hint: The outer faces must be flat to fit the steering neck and steering stem...)  :o






 ;) ;D
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Jay Ace

  • Guest
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #2 on: December 10, 2013, 12:39:56 PM »
^ what he said.
I ordered these today for my '72
http://www.amazon.com/gp/product/B000GZQ3XW/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
They don't look tapered when assembled, but they are.
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #3 on: December 10, 2013, 01:30:30 PM »
Quote from: Jay Ace on December 10, 2013, 12:39:56 PM
^ what he said.
I ordered these today for my '72
http://www.amazon.com/gp/product/B000GZQ3XW/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
They don't look tapered when assembled, but they are.
yuup...thats the one.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Bailgang

  • Scott
  • Old Timer
  • ******
  • Posts: 2,705
  • Indiana
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #4 on: December 10, 2013, 02:13:32 PM »
Uhm uh the reason the 1 bearing looks tapered and the other not in the all balls ebay ad is because the one bearing is setting in it's outer race covered by the grease seal that comes with the kit. The bearing that you can actually see is tapered would look the same once you set it in it's outer race. :)
Logged
Scott


71 cb350 twin
77 cb750 F2
83 gl1100 Interstate

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #5 on: December 10, 2013, 02:33:51 PM »
Read the description under the pretty picture!


Kits come complete with both upper and lower taper bearing cups, cones, and most kits include top and bottom seals
ALL BALLS tapered roller bearings provide decreased maintenance along with less wear, smoother operation and longer life
Designed as a drop-in replacement to upgrade ball-type bearings to taper bearings, or a high quality replacement if your machine comes with tapered bearings stock
Condition: BRAND NEW KIT!
Quantity: (1) One complete Bearing & Seal Kit
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,902
  • Bought her new 4/75
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #6 on: December 10, 2013, 02:39:10 PM »
Look what you got yourself into now  :)
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #7 on: December 10, 2013, 02:59:15 PM »
Quote from: Jerry Rxman Griffin aka MuthaF'er on December 10, 2013, 02:39:10 PM
Look what you got yourself into now  :)
LOL

DUUUUH for me on this one.

I can only hope this doesn't go down the drain like the part removal thread ;)
Logged

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #8 on: December 10, 2013, 07:51:12 PM »
Quote from: edwardmorris on December 10, 2013, 02:59:15 PM

I can only hope this doesn't go down the drain like the part removal thread ;)

I might have missed that one. Link?
Logged
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #9 on: December 10, 2013, 09:11:09 PM »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Jayelwin

  • Hot Shot
  • ***
  • Posts: 436
Re: All Balls Tapered Bearing Kits: Where is the kit with both bearings tapered.
« Reply #10 on: December 11, 2013, 08:28:06 AM »
I agree the picture looks confusing. But rest assured the bearing itself is tapered. They are two different sizes but they are conceptually identical.
Logged
Pages: [1]   Go Up
« previous next »