« previous next »
Pages: [1]   Go Down

Author Topic: Cam ID need help  (Read 1422 times)

0 Members and 1 Guest are viewing this topic.

Offline 195suz

  • Full Member
  • *
  • Posts: 68
Cam ID need help
« on: December 08, 2013, 12:12:34 PM »
I was hoping the experts on here would know what cam this is? It does say made in the USA
Logged

Offline BPellerine

  • Master
  • *****
  • Posts: 2,222
Re: Cam ID need help
« Reply #1 on: December 08, 2013, 12:17:59 PM »
look at the end of the cam and see if there are any markings on it .bill
Logged
1978 CB 750K ard and webers
another anfob

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,902
  • Bought her new 4/75
Re: Cam ID need help
« Reply #2 on: December 08, 2013, 05:52:05 PM »
We've eliminated Yoshimura so far.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,101
  • CB750F Dragbike
Re: Cam ID need help
« Reply #3 on: December 08, 2013, 05:57:31 PM »
Can you measure the base circle and then the lobe dimensions and post that for us?? At least then we would know more details on the cam. Most info is stamped on the end of a cam.
Logged

Offline 195suz

  • Full Member
  • *
  • Posts: 68
Re: Cam ID need help
« Reply #4 on: December 08, 2013, 06:23:45 PM »
Will check the end of the cam.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Cam ID need help
« Reply #5 on: December 08, 2013, 06:45:42 PM »
Norris will have a flat spot between lobes with the markings on it.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,101
  • CB750F Dragbike
Re: Cam ID need help
« Reply #6 on: December 08, 2013, 06:57:14 PM »
Quote from: 754 on December 08, 2013, 06:45:42 PM
Norris will have a flat spot between lobes with the markings on it.

True, forgot about that.
Logged

Offline 195suz

  • Full Member
  • *
  • Posts: 68
Re: Cam ID need help
« Reply #7 on: December 13, 2013, 07:31:02 AM »
OK, no markings on the ends of the cam but I did find this on the flange
Logged

Offline 195suz

  • Full Member
  • *
  • Posts: 68
Re: Cam ID need help
« Reply #8 on: December 13, 2013, 07:32:24 AM »
OH, I did measure the lift on the cam and its 385
Logged

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Cam ID need help
« Reply #9 on: December 13, 2013, 09:10:28 AM »
MegaCycle

You can go to their website and download the catalog for the specs
Logged

Offline 195suz

  • Full Member
  • *
  • Posts: 68
Re: Cam ID need help
« Reply #10 on: December 13, 2013, 09:23:21 AM »
And we have a winner!
                Thanks Jay
Logged

Offline 195suz

  • Full Member
  • *
  • Posts: 68
Re: Cam ID need help
« Reply #11 on: December 13, 2013, 09:31:43 AM »
125-90 .384" 285° 105.5° Drag race profile. Must use racing pistons 37 btc/68 abc .005"
.384" 284° 105° and springs. 12:1 or more compression 67 bbc/37 atc .005"
needed. Not for street use. High R.P.M. cam.
Logged
Pages: [1]   Go Up
« previous next »