Alright here's some things I'm dealing with now and some pictures of me electrics box
It's pretty rough but it's also my first time doing metal bending and sheet metal work. I bent it using my vise.Its made out of 22 gauge steel and welded at the seams. I am going to paint it white in a few days.
This is my regulator I'm not sure if I wrecked it yet but time will tell hopefully not it's an old 1970's ford
And here is my 3 phase rectifier that I heat sinked to my electrics box
And this is the battery tender dongle
Ok so here are some issues I'm having with my wiring.
When I turn the bike on both turn signals act like running lights lol but when I turn the turn signal to the left the left one goes out and same when switched to the right
Next when I push start they both go out and the neutral light on my gauges lights up when I press start also
So that's all so far I'm just trying to get the electrics as clean as possible then make a seat pan and heavily debating on chopping the tail and rear support and welding in a hoop then painting.
