« previous next »
Pages: [1]   Go Down

Author Topic: 550 to 650 cam swap  (Read 6807 times)

0 Members and 1 Guest are viewing this topic.

Offline Doggie

  • Hot Shot
  • ***
  • Posts: 327
  • CB550F, CB650c, CB550k, Cb750K
550 to 650 cam swap
« on: February 11, 2014, 07:35:49 PM »
I have searched for the 550 to 650 cam change, but have not come up with anything helpful. I'm looking for the step by step change. I know this was written up but can't find it.

                                       Thanks, Doug
Logged

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,361
Re: 550 to 650 cam swap
« Reply #1 on: February 11, 2014, 07:46:54 PM »
Manual is your best friend.
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: 550 to 650 cam swap
« Reply #2 on: February 11, 2014, 07:53:45 PM »
Take one out and put the other in.  ;)
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Online calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: 550 to 650 cam swap
« Reply #3 on: February 11, 2014, 07:56:49 PM »
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Doggie

  • Hot Shot
  • ***
  • Posts: 327
  • CB550F, CB650c, CB550k, Cb750K
Re: 550 to 650 cam swap
« Reply #4 on: February 11, 2014, 07:57:59 PM »
Thank you, that was what I was looking for...Doug
Logged

Online calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: 550 to 650 cam swap
« Reply #5 on: February 11, 2014, 08:00:20 PM »
If you use the "Search" menu under your Avatar, you'll have better success finding these topics. I've had mixed results using the Google bar or the search on upper right myself.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Doggie

  • Hot Shot
  • ***
  • Posts: 327
  • CB550F, CB650c, CB550k, Cb750K
Re: 550 to 650 cam swap
« Reply #6 on: February 11, 2014, 08:08:03 PM »
yes, thats the trouble I was having too. Thanks Doug
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: 550 to 650 cam swap
« Reply #7 on: February 11, 2014, 08:22:34 PM »
Have a look at this before re-installing the camshaft and chain.

http://forums.sohc4.net/index.php?topic=369.msg57914#msg57914
Logged

Offline Rgconner

  • Hot Shot
  • ***
  • Posts: 674
Re: 550 to 650 cam swap
« Reply #8 on: February 12, 2014, 07:30:39 AM »
Make sure you get the tach too, the gearing is different ratios, so your RPMs will be off.

I have the 650 cam, the 550 now keeps pulling as hard as it does at 5K all the way to the redline.
Logged
1975 CB550K aka "Grease Monkey"

Offline Doggie

  • Hot Shot
  • ***
  • Posts: 327
  • CB550F, CB650c, CB550k, Cb750K
Re: 550 to 650 cam swap
« Reply #9 on: February 12, 2014, 09:22:22 PM »
Great help Guys!!
                           Doug
Logged

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,232
Re: 550 to 650 cam swap
« Reply #10 on: February 14, 2014, 02:39:42 AM »
 They're over simplifying it a little bit.

 Some heads require a little bit of clearancing for the cam lobes. Not all do. Some just on one side, some on both. It's best to test fit the cam and spin it slowly. I clearanced my head with a Dremel tool.







 You also need to swap the 550 cam gear over to the 650 cam. After that, just align the timing mark on the end of the cam like you would a 550 cam.



 As noted, if you want to run a tach, you'll need the 650 tach drive gear and a CB650 or CB750 tach. I used a CB750 because I could match the gauge face on my speedometer.
Logged
'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650

Offline dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,019
  • WHAT?no gravy?
Re: 550 to 650 cam swap
« Reply #11 on: February 14, 2014, 03:53:33 AM »
a great post by scott with good photos,we love photos,as scott s said,if you dont trial spin the camshaft in the head and cover you are a novice,with no natural mechanical appitude,destined for destruction.
« Last Edit: February 14, 2014, 03:59:15 AM by dave500 »
Logged

Offline CBGhia

  • Expert
  • ****
  • Posts: 1,347
Re: 550 to 650 cam swap
« Reply #12 on: February 14, 2014, 04:00:10 AM »
Quote from: dave500 on February 14, 2014, 03:53:33 AM
as scott s said,if you dont trial spin the camshaft in the head and cover you are a novice,with no natural mechanical appitude,destined for destruction.

And thank you for the new sig line.   This is why Dave deserves a medal.
Logged
CB550 Cafe, GL1000, Buell Ulysses
Quote from: dave500 on February 14, 2014, 03:53:33 AM
if you dont trial spin the camshaft in the head and cover you are a novice,with no natural mechanical appitude,destined for destruction.
"The cleaner the dipstick, the closer to God." -Rev. Horton Heat
“Faster, Faster, until the thrill of speed overcomes the fear of death.”  - Hunter S. Thompson

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: 550 to 650 cam swap
« Reply #13 on: February 14, 2014, 05:01:25 AM »
I hope you cleaned that #3 exhaust valve Scott.   ;)
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline Scott S

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 8,232
Re: 550 to 650 cam swap
« Reply #14 on: February 14, 2014, 05:45:12 AM »
 That's grease. But thanks for looking out!
Logged
'71 CB500 K0
'17 Triumph Street Scrambler
'81 Yamaha XS650
Pages: [1]   Go Up
« previous next »