Author Topic: New (to me) parts seller  (Read 1059 times)

0 Members and 1 Guest are viewing this topic.

Offline tlbranth

  • Master
  • *****
  • Posts: 1,659
New (to me) parts seller
« on: December 19, 2013, 05:56:41 PM »
Searching for Dyna coils, this place was waaaay cheaper than even Z1. (so far they don't seem to have the dyna plug wires though). Looks like they have a ton of stuff including stators for some bikes (maybe not ours).
http://cycleplicity.com/
« Last Edit: December 19, 2013, 05:58:55 PM by tlbranth »
Don't own a Vanagon
Don't work at Boeing
Life is good

1970 CB750 K0
1975 GL1000
1999 GL1500
2002 VT750-CDA ACE - Momma's bike
Terry

Offline tlbranth

  • Master
  • *****
  • Posts: 1,659
Re: New (to me) parts seller
« Reply #1 on: December 20, 2013, 11:03:12 AM »
Don't own a Vanagon
Don't work at Boeing
Life is good

1970 CB750 K0
1975 GL1000
1999 GL1500
2002 VT750-CDA ACE - Momma's bike
Terry

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: New (to me) parts seller
« Reply #2 on: December 20, 2013, 11:45:25 AM »
Whatcha got going on out there in the woods there, Terry? 
Snowed in?  ;D
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mineā€¦"

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: New (to me) parts seller
« Reply #3 on: December 20, 2013, 01:28:00 PM »
Hey terry! As far as plug wires I just get the 7mm copper core bulk wire and ends from NAPA. Even buying extras its a cheap way to go. I still have some left after a couple of tune ups.
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Online dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,492
Re: New (to me) parts seller
« Reply #4 on: December 20, 2013, 04:51:28 PM »
Yep,thats what i did


Sent from my iPhone using Tapatalk
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline tlbranth

  • Master
  • *****
  • Posts: 1,659
Re: New (to me) parts seller
« Reply #5 on: December 20, 2013, 04:52:58 PM »
Whatcha got going on out there in the woods there, Terry? 
Snowed in?  ;D
Yep, got snow. Slushy stuff. Lots of ex-Fresno-ites in the ditch.
Don't own a Vanagon
Don't work at Boeing
Life is good

1970 CB750 K0
1975 GL1000
1999 GL1500
2002 VT750-CDA ACE - Momma's bike
Terry

Offline tlbranth

  • Master
  • *****
  • Posts: 1,659
Re: New (to me) parts seller
« Reply #6 on: December 20, 2013, 04:56:55 PM »
Hey terry! As far as plug wires I just get the 7mm copper core bulk wire and ends from NAPA. Even buying extras its a cheap way to go. I still have some left after a couple of tune ups.
I have some of the Napa stuff but it's not nearly as good as the Dyna wire (I think) and the metal bit that goes on the coil end doesn't look like what I remember the old do-it-yourself ends to look like - so what the heck, I just sprung for the Dyna. They worked nicely on my GL1000.
Don't own a Vanagon
Don't work at Boeing
Life is good

1970 CB750 K0
1975 GL1000
1999 GL1500
2002 VT750-CDA ACE - Momma's bike
Terry