Author Topic: Bill's Stroker Build VII (Read 26231 times)

Bill/BentON Racing · « **on:** January 28, 2014, 05:20:58 PM »

OK,my friends have spoken....the surprise! I listened. So if Medyo doesn't buy the stroker in other post ,then it and rods will be 'For Sale"!!

So I'm still going "BIG"

Let's see what's under this cover with the innocent looking plaque on it!

Oh, I like. old school RC

Let's go deeper!

Looking good,RC H/D cam chain and sprocket.
Don't know about these numbers?

Back of cylinder head

Doesn't say RC, doesn't need to.Screams of good old school work! No flat or raised floor.

another,#2

This the set up for sale if MB doesn't get it!

First year Z1 carbs for sale!!

Another pic or two in a while!

Going to pull top end and see what we got!!!

Enjoy, we snowed in!

Bill
Oh yeh,cleaned out my truck,found this"rag" under my back seat. Heard they were babe magnets, guess I'll try it!

Any M'fr missing one?

Bill/BentON Racing · « **Reply #1 on:** January 28, 2014, 05:33:01 PM »

Funny way to mark it!

But I like that #!
If you recall we all had a love/hate relationship with the 'blue stuff". Slim loved it!!

Theres something "BIG" in there! Yeah.

More later, Bill

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2 on:** January 28, 2014, 05:55:40 PM »

Snowed in!! LMMFAO. What, 1-2"?? I saw a picture earlier today. That is the LAST place anyone would want to be driving today!

Does the shirt have a chunk taken out of the left elbow?

Bill/BentON Racing · « **Reply #3 on:** January 28, 2014, 06:23:52 PM »

What chunk? From crash or waking up with a Coyote!

jaguar · « **Reply #4 on:** January 28, 2014, 06:37:03 PM »

Mmmmm golden rods.......
Me wants...lol

brandEn · « **Reply #5 on:** January 28, 2014, 06:48:19 PM »

Count me in....

dragracer · « **Reply #6 on:** January 28, 2014, 07:31:38 PM »

Dang it Bill,just pick one then hurry up and build something so can be ready to play this season.

Bill/BentON Racing · « **Reply #7 on:** January 28, 2014, 09:13:29 PM »

Frank, that's one of the reasons to go this way. If bottom end looks good, Im running it. So engine could be ready soon.

I'll have minimum of two bikes ready for the season!

Bill So far the things that plaque went with still there!

Jerry Rxman Griffin aka MuthaF'er · « **Reply #8 on:** January 28, 2014, 10:21:42 PM »

Bill, what about the real drag bike? What's the story on it?

Sam Green Racing · « **Reply #9 on:** January 29, 2014, 01:41:04 AM »

Damn, It's only 3.33 am and he's in bed already, that's not like Billy.

Medyo Bastos · « **Reply #10 on:** January 29, 2014, 03:15:32 AM »

Quote from: Bill/BentON Racing on January 28, 2014, 05:20:58 PM

OK,my friends have spoken....the surprise! I listened. So if Medyo doesn't buy the stroker in other post ,then it and rods will be 'For Sale"!!

ok, I AM ALL EARS! give me a call with a price, and you may as well just box it up!

Bill/BentON Racing · « **Reply #11 on:** January 29, 2014, 07:13:54 AM »

Medyo, will call later today, Bill
Jerry, big auto stuck waiting on finding some CB1100F rods.
So going to build/ run RC Cobra engine or what looks like one!

dragracer · « **Reply #12 on:** January 29, 2014, 08:16:52 AM »

Quote from: Bill/BentON Racing on January 29, 2014, 07:13:54 AM

Medyo, will call later today, Bill
Jerry, big auto stuck waiting on finding some CB1100F rods.
So going to build/ run RC Cobra engine or what looks like one!

Good deal. Now to address what chassis this big monster is going into. In my experience, a properly prepped chassis is more important than a lot of power.

joe p · « **Reply #13 on:** January 29, 2014, 09:03:25 AM »

Quote from: dragracer on January 29, 2014, 08:16:52 AM

Quote from: Bill/BentON Racing on January 29, 2014, 07:13:54 AM
Medyo, will call later today, Bill
Jerry, big auto stuck waiting on finding some CB1100F rods.
So going to build/ run RC Cobra engine or what looks like one!

Good deal. Now to address what chassis this big monster is going into. In my experience, a properly prepped chassis is more important than a lot of power.

YOU GOT THAT RIGHT!

Bill/BentON Racing · « **Reply #14 on:** January 29, 2014, 12:18:26 PM »

Well if I put it in Pena chassis, then I could progress on engine and chassis. Then can swap big auto when done building it. Bill Could use my big PM wheel and the GSXR lowered f/end with wheel on it. Be a good start I think.

Bill/BentON Racing · « **Reply #15 on:** January 29, 2014, 02:59:02 PM »

70mm stroker crank and Golden rods SOLD!

Bill

TurboD · « **Reply #16 on:** January 29, 2014, 03:43:04 PM »

Bill Let get that turbo running and go racing.... Hehe

Bill/BentON Racing · « **Reply #17 on:** January 29, 2014, 04:40:47 PM »

Yah, maybe get carb and pump now!

TurboD · « **Reply #18 on:** January 29, 2014, 04:55:04 PM »

What are you using now?

Sam Green Racing · « **Reply #19 on:** January 29, 2014, 06:13:39 PM »

Mine.

dragracer · « **Reply #20 on:** January 29, 2014, 06:37:35 PM »

Quote from: Bill/BentON Racing on January 29, 2014, 12:18:26 PM

Well if I put it in Pena chassis, then I could progress on engine and chassis. Then can swap big auto when done building it. Bill Could use my big PM wheel and the GSXR lowered f/end with wheel on it. Be a good start I think.

It would be nice if it was a roller but as i recall, there's a whole lot more work that needs to be done.

Not trying to mix things up too much but if i remember, you told me you had a double club foot arm and a raked stock chassis in the bunch of parts that came from Gary. I think i there was one picture with a set of wheelie bars. You also have tons of stock tanks, side covers and seats. I gave you an MSD box (just need to buy a 2 step module) and i know you've got a few different sets of coils and at least one Dyna S ignition. You mentioned you had a rear wheel and frontend you could use. I assume there were probably some aftermarket front & rear brake calipers included as well.

Okay, so by now you see where i'm headed with this. Cobble together a stock frame bar bike from the parts and pieces you've got while you wait til you get a Gary framed bike ready to race.

Yeah, easy for me to say!!!! Lol.

Bill/BentON Racing · « **Reply #21 on:** January 30, 2014, 04:32:52 AM »

Frank, it's so ironic. Came up with same plan last night! Other raked chassis has "chrome" Clubfoot!

So that's the plan! It still won't be easy, but should go together quicker. I think mental telepathy was going on! Yeh you going to be needed big time on this one. Mama,.........we going BIG!

Cobra engine and raked frame,big rear PM wheel,have a 350F tank and the K model fiberglass ones.Have a 1100F tail section.Got some seats etc. We'll piece it together with what I got. The "Batcave" bike! I'll dig out chassis this weekend. Purpose built race bike....here we come.

Bill

dragracer · « **Reply #22 on:** January 30, 2014, 08:04:16 AM »

Quote from: Bill/BentON Racing on January 30, 2014, 04:32:52 AM

Frank, it's so ironic. Came up with same plan last night! Other raked chassis has "chrome" Clubfoot! So that's the plan! It still won't be easy, but should go together quicker. I think mental telepathy was going on! Yeh you going to be needed big time on this one. Mama,.........we going BIG! Cobra engine and raked frame,big rear PM wheel,have a 350F tank and the K model fiberglass ones.Have a 1100F tail section.Got some seats etc. We'll piece it together with what I got. The "Batcave" bike! I'll dig out chassis this weekend. Purpose built race bike....here we come. Bill

Sounds like its time for me to do a road trip to Georgia. Visit my brother and then to the Bat Cave - be sure Alfred has some hot tea ready when I get there. Lol

dragracer · « **Reply #23 on:** January 30, 2014, 08:07:35 AM »

Can you post a pic of the PM wheel??? How wide is it?? Remember, the wider the wheel, the wider the offset will need to be on the front sprocket and the greater the need for a bearing support.

Tintop · « **Reply #24 on:** January 30, 2014, 09:54:08 AM »

subscribed, don't want to miss another Benton build.

News:

Author Topic: Bill's Stroker Build VII (Read 26231 times)