« previous next »
Pages: [1]   Go Down

Author Topic: Stock 550 front fender clearance  (Read 673 times)

0 Members and 1 Guest are viewing this topic.

Offline bambuhiphop

  • Hot Shot
  • ***
  • Posts: 697
Stock 550 front fender clearance
« on: February 09, 2014, 08:01:52 PM »
Anyone know the clearance of the stock front fender on a 550 between the forks? Replacing the front wheel with an 18". Wanting to trim down mine to fit the new tire setup.

I know different tires will change measurements but my original tire is long gone...
Logged
75' CB550K -- Still in pieces but it rolls again!!!!

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: Stock 550 front fender clearance
« Reply #1 on: February 10, 2014, 04:00:42 AM »
100/90x19 tyre.

Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline bambuhiphop

  • Hot Shot
  • ***
  • Posts: 697
Re: Stock 550 front fender clearance
« Reply #2 on: February 10, 2014, 07:39:29 AM »
Thanks Lester. Exactly what I needed  8)
Logged
75' CB550K -- Still in pieces but it rolls again!!!!

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: Stock 550 front fender clearance
« Reply #3 on: February 10, 2014, 09:55:16 AM »
I am curious how you plan on modifying the fender? I was going to do this on my 750 that has an 18" front and couldn't see a way to do it.


Sent from my iPad using Tapatalk
Logged

Black 750K8

  • Guest
Re: Stock 550 front fender clearance
« Reply #4 on: February 10, 2014, 10:01:49 AM »
Looks like you would have to do away with the factory brace.
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: Stock 550 front fender clearance
« Reply #5 on: February 10, 2014, 10:04:52 AM »
Am I wrong but if you lay a stock fender on a 18 wheel isn't there going to be a large gap fore and aft?
Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: Stock 550 front fender clearance
« Reply #6 on: February 10, 2014, 10:06:50 AM »

Quote from: LesterPiglet on February 10, 2014, 10:04:52 AM
Am I wrong but if you lay a stock fender on a 18 wheel isn't there going to be a large gap fore and aft?

Yes, exactly


Sent from my iPad using Tapatalk
Logged

Offline bambuhiphop

  • Hot Shot
  • ***
  • Posts: 697
Re: Stock 550 front fender clearance
« Reply #7 on: February 10, 2014, 10:30:50 AM »
Quote from: brandEn on February 10, 2014, 09:55:16 AM
I am curious how you plan on modifying the fender? I was going to do this on my 750 that has an 18" front and couldn't see a way to do it.


Sent from my iPad using Tapatalk

Haven't worked it out completely yet but I have a few thoughts...

1. Chop the side brace down and re-weld. (possible strength issues)
2. Cut the brace at the first bend. Use it to model a new side piece that is about 1 1/4" shorter, cnc them out, and weld back on. (possible strength issues)
3. Pop the rivets and model the whole brace about an 1 1/4" shorter and then reattach to the fender.
Logged
75' CB550K -- Still in pieces but it rolls again!!!!

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: Stock 550 front fender clearance
« Reply #8 on: February 10, 2014, 03:39:39 PM »
Thanks for the reply, keep us posted I would love to see how it turns out!
Logged

Offline bambuhiphop

  • Hot Shot
  • ***
  • Posts: 697
Re: Stock 550 front fender clearance
« Reply #9 on: February 10, 2014, 03:56:26 PM »
Quote from: brandEn on February 10, 2014, 03:39:39 PM
Thanks for the reply, keep us posted I would love to see how it turns out!


Sure thing. I will do my best to document in my build thread.
Logged
75' CB550K -- Still in pieces but it rolls again!!!!

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,898
Re: Stock 550 front fender clearance
« Reply #10 on: February 10, 2014, 07:42:43 PM »
maybe source a fender from cb350k(twin) they have 18" front wheel and th fender could be easily adaptable
Logged
If it works good, it looks good...

Offline bambuhiphop

  • Hot Shot
  • ***
  • Posts: 697
Re: Stock 550 front fender clearance
« Reply #11 on: February 12, 2014, 08:01:02 PM »
Quote from: brandEn on February 10, 2014, 03:39:39 PM
Thanks for the reply, keep us posted I would love to see how it turns out!


Hey BrandEn, any particular reason you didn't go with fenders from Metal 7 West or Motolanna?
Logged
75' CB550K -- Still in pieces but it rolls again!!!!
Pages: [1]   Go Up
« previous next »