Author Topic: 341's installed  (Read 882 times)

0 Members and 2 Guests are viewing this topic.

Offline dhall57

  • Old Timer
  • ******
  • Posts: 3,674
  • The 70's! SOHC4 Honda's & Marcia Brady of course.
341's installed
« on: February 23, 2014, 09:44:40 AM »
Well finally I have them on my K6 ;D And do they sound good going through the gears 8)

Before 341's and after 341's

1970 CB750KO
1971 CB500KO-project bike
1973 CB350G- project bike
1974 CB750K4-project bike
1974 CB750K4
1976 CB750K6
1977 GL1000
1997 Harley Wideglide

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,610
Re: 341's installed
« Reply #1 on: February 23, 2014, 10:00:26 AM »
Yah I say there hall!!! They look awesome and balance the bike out so nice. Nothing like the 4 - 4 to bring back that 70's look. Looks like you got a very nice set there. How was the fitment. Everything line up OK? Envious looks  :o coming your way...
« Last Edit: February 23, 2014, 10:02:57 AM by Johnie »
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline dhall57

  • Old Timer
  • ******
  • Posts: 3,674
  • The 70's! SOHC4 Honda's & Marcia Brady of course.
Re: 341's installed
« Reply #2 on: February 23, 2014, 10:47:21 AM »
Thanks Johnie. IMO can't beat the look of the factory pipes on these babies either. Times have changed haven't they, back in the day people couldn't get these pipes off fast enough so they could install a different pipe of some sort. Of course the #2 I got our of Australia  recently is near perfect, #1 is a nice pipe, #3 is good also but was off a bike that went down or over on that side and scrapped it up some near the end and more toward bottom so its not that noticeable. But like I always say this isn't a show bike its a rider so Im fine with some nicks, and scratches in places. Eye appeal #4 looks good to but internal its a little rough. The rear chamber or baffle was broke lose and rattling around so I removed it. So if I run across a #4 that's in a little better shape inside and the price isn't crazy I'll probably snatch it up.
« Last Edit: February 23, 2014, 11:06:47 AM by dhall57 »
1970 CB750KO
1971 CB500KO-project bike
1973 CB350G- project bike
1974 CB750K4-project bike
1974 CB750K4
1976 CB750K6
1977 GL1000
1997 Harley Wideglide

Offline dhall57

  • Old Timer
  • ******
  • Posts: 3,674
  • The 70's! SOHC4 Honda's & Marcia Brady of course.
Re: 341's installed
« Reply #3 on: February 23, 2014, 10:55:51 AM »
Next project on the 6 will more than likely be getting rid of that damn 16" Harley rear wheel and getting factory back on it. And also get factory mirrors and I think she will be back to factory stock ;D
1970 CB750KO
1971 CB500KO-project bike
1973 CB350G- project bike
1974 CB750K4-project bike
1974 CB750K4
1976 CB750K6
1977 GL1000
1997 Harley Wideglide

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,603
  • Bike almost back to the 70's 2015
Re: 341's installed
« Reply #4 on: February 23, 2014, 11:12:31 AM »
The bike look really good!
A bike like that is worth a very expensive 4-4 as NOS 341's are today.
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,940
Re: 341's installed
« Reply #5 on: February 23, 2014, 11:58:27 AM »
Well done its been a long time coming but it looks great! And yes agree about the 16` rear.

Get it ready for more on the road shots and of course SOHC Calendar 2015 ;)

Good luck!
Andy
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline jtb

  • An unlikely
  • Expert
  • ****
  • Posts: 1,499
Re: 341's installed
« Reply #6 on: February 23, 2014, 12:07:47 PM »
Really looks good. 
1977 CB750F
1985 V65 Sabre
1986 VFR 750 (gone but missed greatly)

Offline hoodellyhoo

  • CB350F
  • Master
  • *****
  • Posts: 1,726
Re: 341's installed
« Reply #7 on: February 23, 2014, 12:50:28 PM »
lookin great!!!!
1972 CB350F (Back from the Dead!)- http://forums.sohc4.net/index.php?topic=20822.0
1965? S65 - Coming Eventually!
1972 CB750K2 (father-son project)
1976 CB750K6- (sold) http://forums.sohc4.net/index.php?topic=96859.0
1976 CB750K6 (sold)- http://forums.sohc4.net/index.php?topic=62569.0

Offline Powderman

  • Master
  • *****
  • Posts: 2,465
    • Creative Candy Powder Coating
Re: 341's installed
« Reply #8 on: February 23, 2014, 02:42:07 PM »
On that particular bike I like the 341's better than the 4/1 because the rest of the bike is so stock that the 341's are just fitting for it. The only thing else I would change is that big back wheel. Other than that  that is a very clean looking bike.
« Last Edit: February 23, 2014, 05:28:16 PM by Powderman »

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: 341's installed
« Reply #9 on: February 23, 2014, 03:14:14 PM »
Yah I say there hall!!! They look awesome and balance the bike out so nice. Nothing like the 4 - 4 to bring back that 70's look. Looks like you got a very nice set there. How was the fitment. Everything line up OK? Envious looks  :o coming your way...

Love the look, hate the weight.... :-[
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline bender01

  • Master
  • *****
  • Posts: 1,860
  • "Follow the leader.He's on a Honda"
Re: 341's installed
« Reply #10 on: February 23, 2014, 04:23:23 PM »
Yeah they look great! Mine are good but sure wish I popped on new ones a few years ago! Any way I replaced 2 baffles last year cheap enough. I think they may still be available for 341s.
75 550 K1
74 750 K4
1968 450 K1 Super Sport
74 750k 836 project
http://www.bikepics.com/members/bender01/
So, the strategy is to lie to people you are asking for help?

I think I'll be busy going for a ride.

Good luck!
Two Tired Quote !