Topic: How many rubber pucks for a 78F and 78K

[Blackhole]

My son and I want to replace our leaking head gaskets before spring comes around and the gasket kits we have didn't come with the rubber pucks.  I would like to get these pucks ordered before we start but want to make sure of the correct amount for each bike.  Mine is a 78 750F and his is a 78 750K.  Is there a good place to get them at and is there a brand we should stay away from ?  Thanks for the help...

[Grabcon]

Go here for the rubber pucks. I have bought a lot of stuff from these folks and never an issue.  http://www.vintagecb750.com/products/4/engine

[Blackhole]

Thanks for the site...but they are out of stock.  Good news is it looks like both bikes take 6 pucks so thats a start.  Thanks again

[Grabcon]

Last year I actually bought some pucks directly from Honda. You may want to try a dealer.

[70CB750]

6 pucks each. Be aware that not all pucks are equal, there is a thread on puck thickness somewhere here, thinner pucks are known to leak.

[david 750f]

Should be available at your Honda dealer. Approximately $3. Part # 91318-300-013

[Trad]

I've had good results with the Versah pucks. They come in a pack of 6 ready to go.

[Blackhole]

Thanks for the replys.  I will check to see if my Honda dealer will get them for me...if not they have the Vesrah pucks on eBay.  Thanks again for the help. 

[PeWe]

gasket sealant in the seats before installing the pucks will help too

[Trad]

gasket sealant in the seats before installing the pucks will help too

That is the only place gasket sealant is needed when rebuilding these top end IMO.

[Blackhole]

Partzilla had them for the best price I could find and they were Honda parts so its a win win.  Gasket sealant or a little RTV?