Topic: Hose that runs from crank case to bottom of oil tank.

[mcswny]

Hey guys, just finished my top end rebuild and she's running great!!! Thanks to my Hondaman book.

Now all I have is some odds and ends to fix and clean up. One of them is the tube that runs from the back of my crankcase to the bottom of my oil tank. Mine is super hard and cracked a little at the top and want to replace. I've been searching and googling and I just don't even know what to call it. The oil return tube? OR if I can just find out the diameter I can search that way.

Thanks for the help!

[flybox1]

bulk hose #95005-1200120M

[Greggo]

Oil Breather Tube.

[mcswny]

thank you so much flybox1!

[edwardmorris]

$12 shipped on ebay, cheaper than yamiya repop. Thanks flybox!

Now if I could only find the breather going from the valve train down to the back of the engine

[flybox1]

$12 shipped on ebay, cheaper than yamiya repop. Thanks flybox!

Now if I could only find the breather going from the valve train down to the back of the engine

measure the outlet pipe OD and head to the auto store.
Im sure they'll have it, and you'll have some lunch money left over 

[mcswny]

$12 shipped on ebay, cheaper than yamiya repop. Thanks flybox!

Now if I could only find the breather going from the valve train down to the back of the engine

measure the outlet pipe OD and head to the auto store.
Im sure they'll have it, and you'll have some lunch money left over 

This is what I planning on doing, I couldn't even find it for 12. I think the cheapest I found it was for $20 and that just seemed insane to me.


Autozone/napa here I come.


Sent from my iPhone using Tapatalk

[edwardmorris]

....... I couldn't even find it for 12. I think the cheapest I found it was for $20 and that just seemed insane to me.....


Autozone/napa here I come.


Sent from my iPhone using Tapatalk

Here you go,

http://www.ebay.com/itm/NEW-HONDA-95005-1200120M-BULK-HOSE-12X1000-BOAT-PART-/120982600049?pt=Boat_Parts_Accessories_Gear&hash=item1c2b1ff971&vxp=mtr

AZ works too, if you're not a compulsive PITA like me (No one can tell its from AZone, BUT I'LL KNOW, I'LL ALWAYS KNOW graaah!!) 

[brandEn]

I need some of this. Thanks!

[mcswny]

Yeah it's just insane. $6.50 for the hose, but $8.99 for the shipping. For something that probably weighs less than a pound...


Sent from my iPhone using Tapatalk

[Duke McDukiedook]

http://forums.sohc4.net/index.php?topic=118995.0

Scroll down and you can find the pressure hose I used for my leaky breather hose solution.

[mcswny]

http://forums.sohc4.net/index.php?topic=118995.0

Scroll down and you can find the pressure hose I used for my leaky breather hose solution.

thanks!!!


Sent from my iPhone using Tapatalk

[mcswny]

http://forums.sohc4.net/index.php?topic=118995.0

Scroll down and you can find the pressure hose I used for my leaky breather hose solution.

Hey duke, I see you got your hose from bel metric for the crank case to oil tank. Figure I might as well replace the breather case tube on the top of the cam while I'm at it. Do you know what diameter that tube is?


Sent from my iPhone using Tapatalk

[Duke McDukiedook]

Off the top of my head I think it may be the same sized 7 or 7.5 mm ID line so  meter will probably get you enough for both. Somebody correct me if I am wrong about the valve cover breather tube.