« previous next »
Pages: [1]   Go Down

Author Topic: #2 not firing  (Read 623 times)

0 Members and 1 Guest are viewing this topic.

Offline neilc

  • Hot Shot
  • ***
  • Posts: 477
  • old school biker,other bike is a 2003 vtx1800c
#2 not firing
« on: April 05, 2014, 11:42:31 AM »
I now the answer to my own question buthere it is anyway.#2 cylnder only starts to fire if i take or really back off on the air screw was set ar 1/14 turns  any ideas before pully carbs.I just checked the slow jet,main jet andfloat height seemed ok when i pullrd bowl off
Logged

Offline neilc

  • Hot Shot
  • ***
  • Posts: 477
  • old school biker,other bike is a 2003 vtx1800c
Re: #2 not firing
« Reply #1 on: April 06, 2014, 03:48:37 AM »
Also set my valves last year now they are all tight,going by manual instructions
Logged

Offline neilc

  • Hot Shot
  • ***
  • Posts: 477
  • old school biker,other bike is a 2003 vtx1800c
Re: #2 not firing
« Reply #2 on: April 06, 2014, 04:07:46 PM »
No one has seen this before?then it might be a good troubleshooting technique for all the threads of carb related cylnders not firing,again by backing out of the adj screw almost all the way it started firing,as soon as i pull the carbs and find out what was wrong with the carb i'll post it
Logged

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: #2 not firing
« Reply #3 on: April 06, 2014, 04:17:12 PM »
Clean em out.

Logged
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional
Pages: [1]   Go Up
« previous next »