Author Topic: not perfect............but done  (Read 1061 times)

0 Members and 1 Guest are viewing this topic.

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,217
not perfect............but done
« on: March 31, 2014, 08:54:33 AM »
Baby hasnt looked this good since i bought her almost 10 years ago.  4 motors, 2 clutches, 3rd set of wheels, 3rd set forks and like 5th set handlebars.
still no flames, havent figured that all out yet, looking at some vinyl decals.  not clear coated yet, thats rustoleum  machinery paint.  fuel resistant by itself.
im done for now, gonna ride the wheels off her again
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,217
Re: not perfect............but done
« Reply #1 on: March 31, 2014, 08:55:45 AM »
another pic other side
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: not perfect............but done
« Reply #2 on: March 31, 2014, 09:04:00 AM »
Looks ready for a cross country adventure.  nice work.
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mineā€¦"

Offline atm cycles

  • Hot Shot
  • ***
  • Posts: 323
Re: not perfect............but done
« Reply #3 on: March 31, 2014, 09:11:41 AM »
Looks good. Ride it man ride it!!  Lester's need tubes?


Sent from my iPhone using Tapatalk

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,361
Re: not perfect............but done
« Reply #4 on: March 31, 2014, 09:19:06 AM »

Looks good. Ride it man ride it!!  Lester's need tubes?


Sent from my iPhone using Tapatalk

Those are not Lester wheels
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline Whaleman

  • Hot Shot
  • ***
  • Posts: 552
Re: not perfect............but done
« Reply #5 on: March 31, 2014, 09:29:57 AM »
Yes, 100% Lesters need tubes. This is right off my paperwork that I got when I bought my Lesters in 1977. Dan

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,217
Re: not perfect............but done
« Reply #6 on: March 31, 2014, 09:31:56 AM »
those arent lesters....................they are the mags off a 1982 kawasaki kz750............19 inch front and 16 inch rear.  had to get new bearings to fit the cb750 rear axle, as this model of kz had 17mm rear axle
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,361
Re: not perfect............but done
« Reply #7 on: March 31, 2014, 09:32:46 AM »

Yes, 100% Lesters need tubes. This is right off my paperwork that I got when I bought my Lesters in 1977. Dan

Lesters can be run tubes or tubeless. Those wheels in the pics are NOT Lesters
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,805
  • Northern Virginia
Re: not perfect............but done
« Reply #8 on: March 31, 2014, 10:53:47 AM »
Ready in time for the season  ;D
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650

Offline FuZZie

  • Expert
  • ****
  • Posts: 1,222
  • If I is expert, I can has cheezburger?
Re: not perfect............but done
« Reply #9 on: March 31, 2014, 12:33:51 PM »
Quote
not clear coated yet, thats rustoleum

I'm thinking a paint job like that should last you for the next 100 years or so....  ;D

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,849
Re: not perfect............but done
« Reply #10 on: March 31, 2014, 07:02:46 PM »

Yes, 100% Lesters need tubes. This is right off my paperwork that I got when I bought my Lesters in 1977. Dan

Lesters can be run tubes or tubeless. Those wheels in the pics are NOT Lesters
bead area of the rim is not designed for positive retention of the tire in a sudden air loss situation.  Please run some inner tubes and help preserve your beautiful wheels ...and your beautiful you
If it works good, it looks good...