Author Topic: 1972 CB750 Steampunk(ish) Bobber Thing (Read 212194 times)

Noddy78 · « **Reply #975 on:** January 20, 2019, 02:21:34 pm »

So armed with my new gas lens and more postflow....

Not the best TIG brazing in the world, but I'm going with 'rustic'... Also I think the wiring loom looks great, probably just leave it like that...

tshrey · « **Reply #976 on:** January 21, 2019, 10:21:43 am »

Holy #$%*!

Stev-o · « **Reply #977 on:** January 21, 2019, 03:50:50 pm »

A work of art! It almost doesnt look real....absolutely incredible workmanship.

What do you lack to fire it up?

Bankerdanny · « **Reply #978 on:** January 22, 2019, 12:37:51 pm »

Quote from: Noddy78 on January 20, 2019, 02:21:34 pm

Not the best TIG brazing in the world, but I'm going with 'rustic'... Also I think the wiring loom looks great, probably just leave it like that...

Ooh, look at the pretty colors, just like a rainbow.

Noddy78 · « **Reply #979 on:** January 27, 2019, 07:25:11 pm »

Quote from: Stev-o on January 21, 2019, 03:50:50 pm

What do you lack to fire it up?

Hmm... courage.. hope? Nah, mostly finishing electrics. But I'll be pulling it all down again so I can finish off the fabrication and get the powder-coating done. Once it's all back together and buttoned-up properly I'll actually try firing it up!

So apart from that, it's pretty much all there:

Also photoshopped a couple of colour options, but I think in the end I'll keep the tins raw and maybe patina them a bit, give it a bit of character. I think the white is just a bit too OTT?

scunny · « **Reply #980 on:** January 27, 2019, 11:18:41 pm »

Yep, raw looks better IMHO

calj737 · « **Reply #981 on:** January 28, 2019, 02:28:53 am »

Not keen on the white either, if an unsolicited opinion matters. I think with all the brass and copper, the metal looks most complementary.

Stev-o · « **Reply #982 on:** January 28, 2019, 07:50:05 am »

Quote from: scunny on January 27, 2019, 11:18:41 pm

Yep, raw looks better IMHO

+1

Noddy78 · « **Reply #983 on:** January 28, 2019, 12:46:55 pm »

Agreed. Bare metal it is.

kerryb · « **Reply #984 on:** January 28, 2019, 02:14:41 pm »

Awesome accomplishment! Truly inspiring. And thank you to you and calj, I just got back from welding supply with silicon bronze filler to try it out with the new gas lens setup. I love the look of your project.

SOHC4 Cafe Racer Fan · « **Reply #985 on:** January 28, 2019, 08:16:11 pm »

Just like the Old Dirty Bastard said, "I like it raw!"

nvr2old · « **Reply #986 on:** January 29, 2019, 08:47:50 am »

It looks cool all raw, and this bike is so beyond the skills of mere mortals to be sure..but..I can't..not..throw in my opinion to finish it off in the way it deserves..please paint the body parts. No bike of the era it represents would be left bare metal. Think of all those great looking steam locomotives and how beautifully they were all painted and festooned. Left raw they would look terrible. Not that I'm saying that about this..it's beautiful. Maybe something subtle like this 2-tone..

knucklehead-engine-hardtail-mooneyes-japan-1200x801 by Larry Pearson, on Flickr

Stev-o · « **Reply #987 on:** January 29, 2019, 03:15:28 pm »

Quote from: nvr2old on January 29, 2019, 08:47:50 am

It looks cool all raw, and this bike is so beyond the skills of mere mortals to be sure..but..I can't..not..throw in my opinion to finish it off in the way it deserves..please paint the body parts. No bike of the era it represents would be left bare metal. Think of all those great looking steam locomotives and how beautifully they were all painted and festooned.

You left out you are a painter, of course you would paint it!

Most locomotives stay out in the weather 24/7, I doubt this bike will. Apples/oranges.

Henry McCann · « **Reply #988 on:** January 29, 2019, 03:54:30 pm »

I still like the white, not white but a cream color. I'll join the chorus, wonderful work!

dusterdude · « **Reply #989 on:** January 29, 2019, 04:30:25 pm »

Quote from: nvr2old on January 29, 2019, 08:47:50 am

It looks cool all raw, and this bike is so beyond the skills of mere mortals to be sure..but..I can't..not..throw in my opinion to finish it off in the way it deserves..please paint the body parts. No bike of the era it represents would be left bare metal. Think of all those great looking steam locomotives and how beautifully they were all painted and festooned. Left raw they would look terrible. Not that I'm saying that about this..it's beautiful. Maybe something subtle like this 2-tone..

knucklehead-engine-hardtail-mooneyes-japan-1200x801 by Larry Pearson, on Flickr

Badass knuckle

Sent from my LG-US601 using Tapatalk

Noddy78 · « **Reply #990 on:** January 29, 2019, 05:50:37 pm »

Thanks for all the kind words folks. I love that Harley, and it does look fantastic, but I think I'm set on the raw finish. I'm not going for any kind of 'period-correct' style or anything, just 'inspired-by'. I'm thinking of trying to get the body work to match the steel on the headlight:

Though that light is probably 100 years old, so not sure how successful I'll be. I will clear coat it all when done, so it'll hopefully hold up to some weather. The headlight is currently clear coated with Penetrol, but it's too glossy ATM, so I'll be doing some experiments while the frame is off being powdercoated, both for patina and for clear coat, and see what I can come up with. Current thought is a few coats of Penetrol for protection, then go over with a matt/satin polyurethane to kill the gloss off.

SOHC4 Cafe Racer Fan · « **Reply #991 on:** January 29, 2019, 11:22:03 pm »

I think the Steampunk look is more about bare metal than painted surfaces.

nvr2old · « **Reply #992 on:** January 31, 2019, 09:47:37 am »

Quote from: Stev-o on January 29, 2019, 03:15:28 pm

Quote from: nvr2old on January 29, 2019, 08:47:50 am
It looks cool all raw, and this bike is so beyond the skills of mere mortals to be sure..but..I can't..not..throw in my opinion to finish it off in the way it deserves..please paint the body parts. No bike of the era it represents would be left bare metal. Think of all those great looking steam locomotives and how beautifully they were all painted and festooned.

You left out you are a painter, of course you would paint it!

Most locomotives stay out in the weather 24/7, I doubt this bike will. Apples/oranges.

I am indeed a painter, so yes, I would paint it. Just because the steam locomotives stayed out in the weather 24/7 doesn't negate the fact they were painted beautifully as were all the passenger cars they pulled. Think Orient Express. I also look back on all those early 20th century Indians, Harleys, and other brands that had great colors on them adorned with hand painted pin-stripes and maybe some gold leaf. To me, the paint would compliment the copper and brass parts and make it stand out even more I love this bike, maybe one of my favorites of all that have been featured on this site. The amount of work and attention to detail is astounding. This gentleman is entitled to do what he wants and it will be loved by all who see it..either way.

Noddy78 · « **Reply #993 on:** February 14, 2019, 02:03:21 pm »

There's light at the end of the tunnel!

calj737 · « **Reply #994 on:** February 14, 2019, 02:08:25 pm »

Is it an inbound locomotive?

Noddy78 · « **Reply #995 on:** February 14, 2019, 04:50:49 pm »

Hahaha! I think that train came at the start of this tunnel...

dave500 · « **Reply #996 on:** February 15, 2019, 01:39:14 am »

I hope that light is supplied by a mouse running in a spin cage?thats how I keep my batteries on tender!

754 · « **Reply #997 on:** February 15, 2019, 09:20:02 am »

You may want to consider Arf and Arf paint..
that is part of the tank painted, part bare.... just putting it out there. .

Syscrush · « **Reply #998 on:** February 15, 2019, 11:46:21 am »

Looking great, Noddy.

I agree that it looks great raw right now, but I think that a distressed paint would not look out of place on the bike, and might kick it up yet another level.

As for the wiring harness, I don't know if this is available anywhere, but I think that small canvas hose (like a tiny diameter firehose) would look spiffy as a means of wrapping/hiding the wiring, while being well in keeping with the overall look.

RAFster122s · « **Reply #999 on:** February 15, 2019, 02:56:24 pm »

Noddy it looks great and I am sure you will decide what you like and move in that direction. I am sure it will look great!
David

News:

Author Topic: 1972 CB750 Steampunk(ish) Bobber Thing (Read 212194 times)