« previous next »
Pages: 1 ... 6 7 [8]   Go Down

Author Topic: 1977 CB750k restore project  (Read 33877 times)

0 Members and 1 Guest are viewing this topic.

Offline dgilling

  • Hot Shot
  • ***
  • Posts: 343
Re: 1977 CB750k restore project
« Reply #175 on: June 07, 2015, 09:40:48 AM »
well I tried to ride it last night.  didn't event get out of the garage.  Rear tire is flat.  I had a new tube put in when I got the tires mounted and I'm pretty sure they pinched the tube putting it on.  They must have never checked it and I didn't check it till now.   >:( so sad.  it was ready to ride. 
Logged

Offline dgilling

  • Hot Shot
  • ***
  • Posts: 343
Re: 1977 CB750k restore project
« Reply #176 on: June 17, 2015, 02:35:02 PM »
I got the tire fixed and have ridden the bike around the block now.  Man, does it feel different.  The suspension feels crazy stiff compared to the old bike.  I might need to play with the shocks some but maybe they're suppose to feel that way.  Brakes are insanely better.  And the bike feels like it has more punch in the low end, probably due to the higher compression.  Headlight is way brighter too.

I noticed a few bad things.  the right front blinker hits the tank when turned all the way (but left doesn't) i'm going to try and move it up or down to hopefully prevent this.  The Center stand brace was loose and moved.  this caused the center stand to clink around and make some noise.  I just moved it back by hand and need to tighten it up. 

I need to do some adjustments on the clutch and controls but overall things felt pretty good.  I'll probably ride over to hondamans house soon and get him to look things over. 

Still waiting on my replacement seat cover.  Final pictures will come after that. 
Logged

Offline dgilling

  • Hot Shot
  • ***
  • Posts: 343
Re: 1977 CB750k restore project
« Reply #177 on: June 18, 2015, 09:43:53 PM »
Is anyone interested in any of my spare parts on the super cheap? Basically cover shipping and donate what you choose.

Some items I have are tail light, signals, headlight, ears, seat bar that holds rear signals, shocks, beat up gauges, pitted fork tubes, and other small randoms. Look through my build for details.

Flybox, calj, Eydugstr And Hondaman get first dibs for all their help. 

Logged

Offline Desert-SOHC

  • Expert
  • ****
  • Posts: 1,015
  • It's old
Re: 1977 CB750k restore project
« Reply #178 on: June 19, 2015, 08:49:27 AM »
I'll take the taillight, headlight, and all the signals and brackets for them.
« Last Edit: June 19, 2015, 09:00:51 AM by Desert-SOHC »
Logged
90 F350 Lariat CS S/C Dually
90 S&S 11SC Cabover Camper
97 FLHTP (under construction)
11 Ranger S/C 2wd

Offline AintNoEasyWay

  • Hot Shot
  • ***
  • Posts: 706
Re: 1977 CB750k restore project
« Reply #179 on: June 24, 2015, 09:13:03 AM »
Did you ever get the black seat in? Would be great to see the final look when you get some time.
Logged

Offline dgilling

  • Hot Shot
  • ***
  • Posts: 343
Re: 1977 CB750k restore project
« Reply #180 on: July 06, 2015, 09:25:50 AM »
Quote from: AintNoEasyWay on June 24, 2015, 09:13:03 AM
Did you ever get the black seat in? Would be great to see the final look when you get some time.

Still no sign of the seat  :'(

I sure wish it would come in .  I was out on vacation all last week and expected it to be here by the time I got back. 
Logged

Offline dgilling

  • Hot Shot
  • ***
  • Posts: 343
Re: 1977 CB750k restore project
« Reply #181 on: July 16, 2015, 04:19:23 PM »
There she be in all her glory.  So satisfied.  I still need to redo the seat cover because the original tabs didn't hold this one on very well but it's good enough for a picture.  I have 32 miles on her and everything seems to run good. 

The overall goal was "just better"  I think I achieved that. I really wish I had more detailed before photos.   Not a Café, not a Brat, just a motorcycle....my CB750.  Mostly stock with some cosmetic upgrades.  All the work was done by me, except the Top End rebuild by Hondaman and he did the custom swing arm bushings.  Everything feels like a modern bike now. 

Before:

After:




Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1977 CB750k restore project
« Reply #182 on: July 16, 2015, 04:36:51 PM »
VERY MUCH improved wrap on the seat. No more loose fold over corners!  NICE!!!

https://www.flickr.com/photos/124262793@N02/19509406320/in/photostream/
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline AintNoEasyWay

  • Hot Shot
  • ***
  • Posts: 706
Re: 1977 CB750k restore project
« Reply #183 on: July 16, 2015, 05:24:52 PM »
Awesome upgrade, man. I love it. Congrats & have fun!!
Logged

Offline enwri

  • Hot Shot
  • ***
  • Posts: 385
  • So that noise is normal?
Re: 1977 CB750k restore project
« Reply #184 on: July 17, 2015, 05:47:03 AM »
Hi there, I just a had a read of your bike while we're waiting for AintNoEasy to get his running, and noticed you said something about the chain not lining up.
77s have the wide sprocket carrier that offsets it outwards 10mm.
I've put up a photo of the 77 and earlier carriers, and what I have on my 77.
It's either me or you that have the wrong one on, but they look different on mine.

Wider carrier, smaller spacer on outside, longer greasy spacer inside, sprocket closer to swingarm.

Also the  pressed metal chain catcher ring on the outside seems extra important now because there's not enough room for the chain (at least for the 630) in between the sprocket, the sprocket studs and the swingarm if the chain ever comes off, instant lockup. I've had a wheel lockup on a bike,(but not from this,) and am lucky to be alive. I'll leave mine on.
« Last Edit: July 17, 2015, 08:33:10 AM by enwri »
Logged
77 CB 750 k.. 29 years and counting.
91 TDM 850 (No.34) so comfy and soft
8? XJ 550 meh...
76 XL 350 Super Sport stump puller..
80 XR 200 idiot proof
75 MX 250 b dangerous

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,789
  • Northern Virginia
Re: 1977 CB750k restore project
« Reply #185 on: July 17, 2015, 06:11:02 AM »
Great looking bike, nice work!

Quote from: dgilling on July 16, 2015, 04:19:23 PM
There she be in all her glory.  So satisfied.  I still need to redo the seat cover because the original tabs didn't hold this one on very well but it's good enough for a picture.  I have 32 miles on her and everything seems to run good. 

The overall goal was "just better"  I think I achieved that. I really wish I had more detailed before photos.   Not a Café, not a Brat, just a motorcycle....my CB750.  Mostly stock with some cosmetic upgrades.  All the work was done by me, except the Top End rebuild by Hondaman and he did the custom swing arm bushings.  Everything feels like a modern bike now. 

Before:

After:





Logged

Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,966
Re: 1977 CB750k restore project
« Reply #186 on: July 17, 2015, 04:16:44 PM »
Really nice work on the bike.  I love the look.
Logged
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html

Offline dgilling

  • Hot Shot
  • ***
  • Posts: 343
Re: 1977 CB750k restore project
« Reply #187 on: July 17, 2015, 04:25:06 PM »
Quote from: enwri on July 17, 2015, 05:47:03 AM
Hi there, I just a had a read of your bike while we're waiting for AintNoEasy to get his running, and noticed you said something about the chain not lining up.
77s have the wide sprocket carrier that offsets it outwards 10mm.
I've put up a photo of the 77 and earlier carriers, and what I have on my 77.
It's either me or you that have the wrong one on, but they look different on mine.

Wider carrier, smaller spacer on outside, longer greasy spacer inside, sprocket closer to swingarm.

Also the  pressed metal chain catcher ring on the outside seems extra important now because there's not enough room for the chain (at least for the 630) in between the sprocket, the sprocket studs and the swingarm if the chain ever comes off, instant lockup. I've had a wheel lockup on a bike,(but not from this,) and am lucky to be alive. I'll leave mine on.

I converted to a 520 chain so it might look different.
Logged

Offline enwri

  • Hot Shot
  • ***
  • Posts: 385
  • So that noise is normal?
Re: 1977 CB750k restore project
« Reply #188 on: July 17, 2015, 07:34:31 PM »
Maybe I have the wrong spacer in, I can't find a good photo. different sprocket and chain size wont change the alignment difference.
AintNoEasy has his wheel off, I'll ask him to look at his for me.
Logged
77 CB 750 k.. 29 years and counting.
91 TDM 850 (No.34) so comfy and soft
8? XJ 550 meh...
76 XL 350 Super Sport stump puller..
80 XR 200 idiot proof
75 MX 250 b dangerous

Offline TomsK8resto

  • Enthusiast
  • **
  • Posts: 134
Re: 1977 CB750k restore project
« Reply #189 on: July 18, 2015, 03:03:55 PM »
Very nice!

Tom
Logged
'69 CB750 long gone
'76 CB750F gone
'78 CB750K in progress.....
'09 H-D Roadglide

Offline enwri

  • Hot Shot
  • ***
  • Posts: 385
  • So that noise is normal?
Re: 1977 CB750k restore project
« Reply #190 on: July 18, 2015, 03:46:45 PM »
Yes, I should add, very nice work on the detail and paint, I realized my first words to you weren't the most positive, Ha. Sorry, I hate when that happens to me, which it has.

I got Icon shocks and springs as well, it felt like a motocrosser, put all my old springs back on with the Icon bodies, I need another 20 kilos to make their springs work. Suppose I should have mentioned my weight when I ordered.
Logged
77 CB 750 k.. 29 years and counting.
91 TDM 850 (No.34) so comfy and soft
8? XJ 550 meh...
76 XL 350 Super Sport stump puller..
80 XR 200 idiot proof
75 MX 250 b dangerous

Offline dgilling

  • Hot Shot
  • ***
  • Posts: 343
Re: 1977 CB750k restore project
« Reply #191 on: July 18, 2015, 03:59:56 PM »
Quote from: enwri on July 18, 2015, 03:46:45 PM
Yes, I should add, very nice work on the detail and paint, I realized my first words to you weren't the most positive, Ha. Sorry, I hate when that happens to me, which it has.

I got Icon shocks and springs as well, it felt like a motocrosser, put all my old springs back on with the Icon bodies, I need another 20 kilos to make their springs work. Suppose I should have mentioned my weight when I ordered.


No worries. I'm the same way with the ikons. I don't compress them much but they make a big difference
Logged
Pages: 1 ... 6 7 [8]   Go Up
« previous next »