« previous next »
Pages: [1]   Go Down

Author Topic: 550 jetting. Where to find them and where to start?  (Read 1161 times)

0 Members and 1 Guest are viewing this topic.

JP

  • Guest
550 jetting. Where to find them and where to start?
« on: September 19, 2006, 01:59:02 PM »
Hey fellas,
I didn't get any bites in the tech forum, and I need help kinda quick so I posted here as well.

I did a search and couldn't find the answers I need, so.....

I am jetting my 550 and first off I need to know where I can get these odd little push in jets.

Second, what size would you recommend for the mains, considering pod filters and an open 4-1 pipe?

Thanks,
JP
Logged

JP

  • Guest
Re: 550 jetting. Where to find them and where to start?
« Reply #1 on: September 20, 2006, 09:58:54 AM »
Okay, it seems that everyone has this problem ???

I found what to get- Mikuni N208.099

I found where to get it- www.sudco.com

All I need to know is what the stock jet size is.  I think it is either 100 or 110.  Does anyone know for sure?

JP
Logged

jdhasten

  • Guest
Re: 550 jetting. Where to find them and where to start?
« Reply #2 on: September 20, 2006, 10:53:16 AM »
it's a 100 beeoch
Logged

JP

  • Guest
Re: 550 jetting. Where to find them and where to start?
« Reply #3 on: September 20, 2006, 11:18:51 AM »
great, the only advise I get is from a chump that doesn't even have his bike yet.  is it just me, or is that lame?
JP
Logged

jdhasten

  • Guest
Re: 550 jetting. Where to find them and where to start?
« Reply #4 on: September 20, 2006, 11:38:43 AM »
i' ve been brushing up on the specs.....i mean suck it
Logged
Pages: [1]   Go Up
« previous next »