Author Topic: My CB 350 Honda tracker.....vintage racer..plus the XL 350 STUNT. Bike.. (Read 5688 times)

754 · « **on:** May 17, 2014, 08:25:14 PM »

Gave up on the Ossa frame, scored an SL 350 will work pretty good.. Just got the frame today. Have to cut the tail of to run my Champion seat fender combo.
Not sure on tank yet tried several. This has to be running for second weekend of July and on the track. Pretty happy with this frame..

754 · « **Reply #1 on:** May 17, 2014, 08:30:08 PM »

After a bit of grinding off brackets the seat base fits, and I have hoops already bent for the back to match this fender

Greg H · « **Reply #2 on:** May 18, 2014, 01:25:02 AM »

Lookin good Frank

I must be getting old cos anything with the word" vintage" in the title always seems to get my attention now

.

BPellerine · « **Reply #3 on:** May 18, 2014, 07:20:39 PM »

what kind of tank? the seat and tank look good together!bill

Stev-o · « **Reply #4 on:** May 18, 2014, 08:05:10 PM »

Subscribed. Is that the motor?

754 · « **Reply #5 on:** May 18, 2014, 10:39:16 PM »

That was a Honda trials tank, aluminum, but not gonna. Work.
Tried an RM125 Suzuki aluminum one today, fits better and lighter.. Like 2.5 lbs or less..
Got a complete motor that hopefully runs.

BPellerine · « **Reply #6 on:** May 19, 2014, 03:45:14 PM »

piece by piece Frank!

754 · « **Reply #7 on:** May 29, 2014, 07:43:35 AM »

Got the rear hoop done..looks good..
Will run the RM tank,made a petcock eliminator, will run inline petcock.

Roach Carver · « **Reply #8 on:** May 29, 2014, 09:42:25 AM »

cool.

Old Scrambler · « **Reply #9 on:** May 29, 2014, 05:12:33 PM »

Frank.............this will be cool....................That frame had a steering dampener very similar to the CL72/77 models and was used on the CR750.

Stev-o · « **Reply #10 on:** May 29, 2014, 05:31:31 PM »

Shocks shipped on Tues Frank.

I'll PM you the receipt.

754 · « **Reply #11 on:** May 30, 2014, 09:28:10 PM »

Just got the stunt bike, used in Tron.
Sadly deteriorated, will turn it back to an XL tracker..

scunny · « **Reply #12 on:** May 30, 2014, 09:43:51 PM »

haha. fake double discs, I like it.

SOHC4 Cafe Racer Fan · « **Reply #13 on:** May 30, 2014, 11:45:31 PM »

Sad looking fake Duc.

Hopefully you can give it a new life.

Roach Carver · « **Reply #14 on:** May 31, 2014, 03:33:36 AM »

According to the tank you bought a Ducati.

SOHC4 Cafe Racer Fan · « **Reply #15 on:** May 31, 2014, 08:55:02 AM »

Quote from: roach carver on May 31, 2014, 03:33:36 AM

According to the tank you bought a Ducati.

If you count the outer cover of the tank hiding another tank underneath it.

Roach Carver · « **Reply #16 on:** May 31, 2014, 09:01:48 AM »

I do

BPellerine · « **Reply #17 on:** May 31, 2014, 05:04:37 PM »

well frank looks like you have another project!diff combination of parts there!bill

754 · « **Reply #18 on:** June 01, 2014, 10:35:13 AM »

If you watch the trailer for the last TRON movie, you can see the bike in action at the :23 mark.

754 · « **Reply #19 on:** June 08, 2014, 07:15:23 PM »

It looks like a Honda 350 Again. Made an adaptor. Between stock airbox joint and the unit filter.. The coupler weighs. 30 grams.. Then we went to the track Saturday..

BPellerine · « **Reply #20 on:** June 09, 2014, 06:20:58 PM »

you must have gotten tired of being bugged about filters on your webers!haha.how did the bike work?bill

754 · « **Reply #21 on:** June 09, 2014, 07:50:02 PM »

It worked good, going to change a few things, but it will go a lot better than the 750 did .. Fairly easy to ride too.. Still. Makes pretty good power, although it smokes and leaks a lot...
I think it's around 400cc, and commercial.. Some racers would get close to 50 hp out of a well built one...get up to about 485 cc with a stroker.
They sound good reminds. Me of short track races we used to go to..

BPellerine · « **Reply #22 on:** June 10, 2014, 03:39:26 PM »

yeah probably a nice throaty sound when you wind it up and good torque too must be fun to just rip around!bill

CB750R · « **Reply #23 on:** June 10, 2014, 06:19:50 PM »

Nice to see the tracker coming along! Look forward to snapping some photos at the track

754 · « **Reply #24 on:** June 25, 2014, 10:14:51 PM »

Changed the 17 inch front mag..to 350 G front 18 with a 4.00x18.., only 2 lbs more.
Changed bars,and fork springs..should handle better.

News:

Author Topic: My CB 350 Honda tracker.....vintage racer..plus the XL 350 STUNT. Bike.. (Read 5688 times)