Topic: PAMCO Electronic Ignition

[Jake1990]

Hey guys and gals! I just bought a PAMCO Electronic Ignition for my 1974 CB750K. I was just wondering where and how everyone ran their red and black wires for the unit. I was hoping for some ideas so my wiring harness doesn't look like a bowl of spaghetti. Thanks in advance for any ideas or tips!

[goldarrow]

Follow instruction from the manufacturer, should be fairly straight forward

[AJK]

This should get you on your way
http://www.cb750ignition.com/installation3.htm

[70CB750]

Hey guys and gals! I just bought a PAMCO Electronic Ignition for my 1974 CB750K. I was just wondering where and how everyone ran their red and black wires for the unit. I was hoping for some ideas so my wiring harness doesn't look like a bowl of spaghetti. Thanks in advance for any ideas or tips!

I spliced into point wires of course and tucked the additional leads to the harness for the rear brake switch.  If I remember correctly, I spliced the black/white wire from kill switch at the ignition coils.