Author Topic: Jetting Keihin CR carbs on stock K0  (Read 554 times)

0 Members and 1 Guest are viewing this topic.

Offline petejohno

  • Full Member
  • *
  • Posts: 33
Jetting Keihin CR carbs on stock K0
« on: June 26, 2014, 07:57:56 AM »
Just fitted some new CR's to my stock engine and wondering what settings for needle clip position, mixture screws , main jets etc. you guys are using. Engine is in excellent condition with a dyna S , green coils with resistors and HM300's.

So far the bike has strong midrange to redline with no flatspots, but has some slight popping at lower revs.

Johno