« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: Steering Bearings?  (Read 5772 times)

0 Members and 1 Guest are viewing this topic.

Offline mkramer1121

  • Expert
  • ****
  • Posts: 1,304
Re: Steering Bearings?
« Reply #25 on: December 18, 2006, 04:36:19 AM »
I just pryed/popped mine off with a screwdriver.  The 750 one looked like grabge afterwards, but the GL one is reusable, you just have to tap/work your way around it carefully.
Logged

Offline pae

  • Enthusiast
  • **
  • Posts: 213
    • Phil Edwards CB650 pages
Re: Steering Bearings?
« Reply #26 on: December 18, 2006, 05:03:46 AM »
Ta very much - that's all the encouragement I need to just get on with it  :).  I'll be replacing all bits so damage ain't a worry (unless it's to the stem  :( )

Regards, Phil
Logged
'79 CB650  .... | ....  XJ600 electric drag racer  .... | ....  T W M C

It takes a lot of practice to sound like yourself

Offline Jinxracing

  • It's hot shit, not
  • Hot Shot
  • ***
  • Posts: 610
  • '70 CB750 K1
    • The Hairy Nickel
Re: Steering Bearings?
« Reply #27 on: December 18, 2006, 09:07:09 AM »
Quote from: mkramer1121 on December 18, 2006, 04:36:19 AM
I just pryed/popped mine off with a screwdriver.  The 750 one looked like grabge afterwards, but the GL one is reusable, you just have to tap/work your way around it carefully.

I was about to ask the same question...thanks for the info!

Jim
Logged
"Each of us can find a maggot in our past which will happily devour our futures."

–Captain Horatio Hornblower

www.thehairynickel.com

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: Steering Bearings?
« Reply #28 on: December 18, 2006, 11:08:32 AM »
The rubber seal will stretch and come off without damage to it. then you can knock the bearing off quite easily.
PJ
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Offline pae

  • Enthusiast
  • **
  • Posts: 213
    • Phil Edwards CB650 pages
Re: Steering Bearings?
« Reply #29 on: December 21, 2006, 06:38:29 AM »
As the man says, seal easily pulls over the lower race (grip the edge with pliers and ease it out and up and over), and then the lower cone came off - required a fair few heavy taps, but it came off just fine.

thanks to all, another job done,

regards, Phil
Logged
'79 CB650  .... | ....  XJ600 electric drag racer  .... | ....  T W M C

It takes a lot of practice to sound like yourself
Pages: 1 [2]  All   Go Up
« previous next »