Author Topic: Have found this EBay supplier  (Read 893 times)

0 Members and 1 Guest are viewing this topic.

Offline pdeg

  • Full Member
  • *
  • Posts: 50
Have found this EBay supplier
« on: July 01, 2014, 12:33:40 AM »

http://stores.ebay.com/cruzinimage-co1484

I think I bought a set of carby kits from them.  Have not installed yet so cannot comment.
But the price seems good.

Offline Bowswell

  • CB750K1,CB750 K4,CB350F,CB400t1,meanstreak
  • Enthusiast
  • **
  • Posts: 250
Re: Have found this EBay supplier
« Reply #1 on: July 01, 2014, 06:34:56 AM »
It,s f..ck..g scrap,mesure  all new jet with your old parts ,because nothing ISO ....

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Have found this EBay supplier
« Reply #2 on: July 01, 2014, 07:03:38 AM »
The JT Sprockets are about the only thing i'd trust on that page  ???
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mineā€¦"

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Have found this EBay supplier
« Reply #3 on: July 01, 2014, 07:53:14 AM »
I was thinking of getting gaskets for a 350 XL, are they no good?
 I thought their pistons were considered well worth it ?..ie 836 kit.
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: Have found this EBay supplier
« Reply #4 on: July 01, 2014, 09:07:49 AM »
As a general rule never waste time on cheap carb kits that include jets. For the most part, o-rings are o-rings and paper gaskets paper gaskets, so a cheap carb gasket kit is fine. But you simply cannot trust that the jet sizes and needle profiles are correct and many an owner has gotten frustrated and sold a perfectly good bike because he couldn't get it to run right after 'rebuilding' the carbs with substandard jets that weren't the size they said they were.

Jets and needles rarely wear out, but if you need new ones take the time and spend the money on genuine Honda or Keihin parts.
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline EricHa

  • Enthusiast
  • **
  • Posts: 102
Re: Have found this EBay supplier
« Reply #5 on: July 01, 2014, 09:30:06 AM »
Yes, the cruzinimage Honda piston kits have gotten good reviews on this forum.

http://forums.sohc4.net/index.php?topic=89779.0
« Last Edit: July 01, 2014, 09:33:37 AM by EricHa »
1975 Honda CB550K1
1976 Honda CB750K6
1977 Kawasaki KZ900A5

Offline bjbuchanan

  • Master
  • *****
  • Posts: 2,276
Re: Have found this EBay supplier
« Reply #6 on: July 01, 2014, 09:44:00 AM »
Unless it's OEM Honda don't use the brass. Otherwise he is a good guy, stuff doesn't seem to be junk. I have the 836 kit for my bike and rubber hoses for another bike
The dirty girl-1976 cb750k, Ebay 836, Tracy bodykit
Round top carbs w/ 38 pilots, middle needle position, airscrew 7/8ths out, 122 main jet
Stock airbox w/ drop in K&N, Hooker 4-1

Don't trust me alone with a claw hammer and some pliers

Offline harisuluv

  • Master
  • *****
  • Posts: 2,009
Re: Have found this EBay supplier
« Reply #7 on: July 01, 2014, 09:56:06 AM »
Those carb kits are trash.  I would not recommend them.