« previous next »
Pages: [1]   Go Down

Author Topic: Crankcase Transmission Cover Grommet Removal  (Read 338 times)

0 Members and 1 Guest are viewing this topic.

Offline dgilling

  • Hot Shot
  • ***
  • Posts: 343
Crankcase Transmission Cover Grommet Removal
« on: July 18, 2014, 12:16:09 PM »
What is the best way remove the rubber grommet thats on the crankcase transmission cover?  I tried to pull on it with a hook tool but it didn't act like it wanted to come out.  I'm taking the cover to powder coat so I need to remove it.
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Crankcase Transmission Cover Grommet Removal
« Reply #1 on: July 18, 2014, 01:39:16 PM »
Quote from: dgilling on July 18, 2014, 12:16:09 PM
What is the best way remove the rubber grommet thats on the crankcase transmission cover?  I tried to pull on it with a hook tool but it didn't act like it wanted to come out.  I'm taking the cover to powder coat so I need to remove it.
Huh?

Do you mean the shift shaft oil seal? If so, pull on it with a hook tool till it acts like it wants to come out.  ;)

Or pry with a driver or tire tool.  Shouldn't be a problem.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."
Pages: [1]   Go Up
« previous next »