« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: CB550 to match my car.... (Fabrication Heavy)  (Read 6049 times)

0 Members and 1 Guest are viewing this topic.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB550 to match my car....
« Reply #25 on: March 31, 2014, 08:49:02 PM »
Quote from: toreadorxlt on March 31, 2014, 08:32:04 PM
http://youtu.be/fA9f8bJiWz4

Quick video of the process I use to make a tail. This one is steel and came out fine. 1.5 hours time so far. I'll finish it Wednesday

Sandbag and mallet to quickly stretch the center. Pullmax on the edges that need to be shrunk. Then planishing hammer and party.

Sent from my iPhone using Tapatalk

Holy crap, that was quick.  The planishing hammer seems to make short work of it.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline toreadorxlt

  • Full Member
  • *
  • Posts: 19
CB550 to match my car....
« Reply #26 on: March 31, 2014, 08:56:12 PM »
To be honest the planishing hammer doesn't do much other than smooth the metal after. Most of the shape was done in my Pullmax hammer which was the first one. I have special dies that grab the metal and force it into itself, shrinking it's surface area. They leave some marks and the planishing hammer takes those out. I also ran it through my English wheel in the end to wash over any highs and lows. It's 75% there I can still metalfinish it more. And I will after I build the rest.


Whatever I know about sheetmetal and fab I lack in wiring and mechanics. I have no idea how to make this bike run or wire it but I figure this is the place to be haha

Sent from my iPhone using Tapatalk
« Last Edit: March 31, 2014, 08:58:01 PM by toreadorxlt »
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB550 to match my car....
« Reply #27 on: March 31, 2014, 08:58:58 PM »
Quote from: toreadorxlt on March 31, 2014, 08:56:12 PM
To be honest the planishing hammer doesn't do much other than smooth the metal after. Most of the shape was done in my Pullmax hammer which was the first one. I have special dies that grab the metal and force it into itself, shrinking it's surface area. They leave some marks and the planishing hammer takes those out. I also ran it through my English wheel in the end to wash over any highs and lows. It's 75% there I can still metalfinish it more. And I will after I build the rest.


Whatever I know about sheetmetal and fab I lack in wiring and mechanics. I have no idea how to make this bike run or wire it but I figure this is the place to be haha

Sent from my iPhone using Tapatalk

I think I got my tools mixed up.  I was referring to that nasty bastard with the dies. 

Very impressive!
« Last Edit: April 01, 2014, 02:33:44 PM by CB750 Cafe Racer Fan »
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Statenheimer

  • Full Member
  • *
  • Posts: 73
Re: CB550 to match my car....
« Reply #28 on: April 01, 2014, 01:32:05 PM »
Awesome work so far, looking forward to seeing how this one progresses  8)
Logged
'75 550F - Resto/mod - Riding - But never really finished...
'76 550K - Cafe build - On hold
'78 550K - Parts - Good engine for another day
'73 500 - Parts - Engine seized
'90 CB-1 - No longer seized! but still title-less

Offline toreadorxlt

  • Full Member
  • *
  • Posts: 19
CB550 to match my car....
« Reply #29 on: April 01, 2014, 07:56:16 PM »
Thanks. Had some stuff to throw in the powder oven tonight so this went in and got a fresh coat of matte black. Gotta straighten out the Honda tag. Unless somebody knows where I can source a new one.


Sent from my iPhone using Tapatalk
My home made oven. Should fit the frame.
« Last Edit: April 01, 2014, 07:57:51 PM by toreadorxlt »
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB550 to match my car....
« Reply #30 on: April 01, 2014, 08:56:05 PM »
Quote from: toreadorxlt on April 01, 2014, 07:56:16 PM
Thanks. Had some stuff to throw in the powder oven tonight so this went in and got a fresh coat of matte black. Gotta straighten out the Honda tag. Unless somebody knows where I can source a new one.


Sent from my iPhone using Tapatalk
My home made oven. Should fit the frame.

Yamiya sells those.  Look at the Frame Group -- Handle Top Bridge.  They go for $10.19
« Last Edit: April 01, 2014, 09:01:04 PM by CB750 Cafe Racer Fan »
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline toreadorxlt

  • Full Member
  • *
  • Posts: 19
Re: CB550 to match my car....
« Reply #31 on: July 28, 2014, 04:46:52 AM »
Decided to try to build an aluminum tank. Going good so far. We'll see how it pressure tests eventually. It might be a trash ornament in the end but it was a good experience. Had to anneal the metal a few times to shape it, also made me a new English wheel that actually works unlike my old HF one





Rough shape


Made the other side

Start connecting the two
Logged

Offline mikbeanz

  • Full Member
  • *
  • Posts: 17
  • “Aren’t you a little short for a stormtrooper?”
Re: CB550 to match my car....
« Reply #32 on: July 28, 2014, 12:52:43 PM »
Killer looking tank! I bet the English wheel comes in handy from time to time.
Logged

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,482
Re: CB550 to match my car....
« Reply #33 on: July 28, 2014, 01:31:33 PM »
You have skills dude,looks good
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline Trad

  • Expert
  • ****
  • Posts: 964
Re: CB550 to match my car....
« Reply #34 on: July 28, 2014, 01:46:53 PM »
Nice work man. Really dig the tank!
Logged
74 CB550 Build: NOS-GUTTED-OEMplus-HOLDTRUE
http://forums.sohc4.net/index.php/topic,130575.0.html

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: CB550 to match my car....
« Reply #35 on: July 28, 2014, 03:08:37 PM »
Never seen anybody build their own english wheel before. Without the metal working stuff it looks like a piece of modern sculpture.
Logged
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB550 to match my car....
« Reply #36 on: July 28, 2014, 04:05:30 PM »
Tool maker and tank fabricator.  Serious kudos!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Tews19

  • I am no
  • Really Old Timer ...
  • *******
  • Posts: 6,465
Re: CB550 to match my car....
« Reply #37 on: July 28, 2014, 07:32:32 PM »
Wow ! You have some sick skills!  Subscribed! What's the plan for your jade green tank? If you decide to sell let me know please.
Logged
1969 Honda CB750... Basket case
1970 Honda CB750 survivor.

Offline toreadorxlt

  • Full Member
  • *
  • Posts: 19
Re: CB550 to match my car....
« Reply #38 on: July 28, 2014, 08:58:18 PM »
Thanks so much for the kind words. The English wheel is a powerful tool but I start most everything on a stump or sandbag. I smooth and do the final 10% stretch on a wheel.  A stiff frame really makes a good wheel, which is why I had to get rid of the HF one. Also proper anvil alignment is key. I like the finish it leaves. Made this one the other day while my lady was snoozing.





The jade tank is staying until i pressure test and like the new one.

Logged
Pages: 1 [2]  All   Go Up
« previous next »