Author Topic: VP C12 vs Sunoco Standard  (Read 891 times)

0 Members and 1 Guest are viewing this topic.

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
VP C12 vs Sunoco Standard
« on: August 06, 2014, 06:17:49 pm »
Has anyone switched from C12 to Sunoco fuel? I know they're close but am curious if there was any need for jetting/ignition changes.

Offline joe p

  • Enthusiast
  • **
  • Posts: 124
Re: VP C12 vs Sunoco Standard
« Reply #1 on: August 07, 2014, 04:06:28 am »
I could not tell any difference with my dragbike.
« Last Edit: August 07, 2014, 04:09:36 am by joe p »

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,067
  • CB750F Dragbike
Re: VP C12 vs Sunoco Standard
« Reply #2 on: August 07, 2014, 05:06:04 am »
Slight adjustments for me. VP seemed to burn leaner. I prefered the Sunoco when it was readily available to me. Costs less also but no real performance difference I ever detected. Of course I never dynod anything either but my time slips were consistent in the drag bike

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: VP C12 vs Sunoco Standard
« Reply #3 on: August 07, 2014, 10:03:04 am »
Thanks Frank. My supplier has switched alliances and is now selling Sunoco. I originally chose C12 for the few advantages I read it might have. Truth is it could have been better marketing, however there are certainly subtle differences. I think I'll try some Sunoco 110 but will pay attention to plugs in case there is a need to make changes.