Author Topic: CB750 turbo dragbike build (Read 6220 times)

76kcafe · « **on:** August 18, 2014, 07:00:20 PM »

I made a post awhile ago about the turbo bike I was building. After 5 years the bike is finally finished so I thought I would share some pictures with you guys.

754 · « **Reply #1 on:** August 18, 2014, 07:09:27 PM »

Man is that SWEEt.. I love the kawi tail section, struts, and the pipe its what I ran with my webers..
Dig the Fibremold tank with stock type stripes. Well played..

dragracer · « **Reply #2 on:** August 18, 2014, 07:53:46 PM »

Nice ride

Bill/BentON Racing · « **Reply #3 on:** August 18, 2014, 08:12:54 PM »

Very nice. Now tell us more!

K.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #4 on:** August 18, 2014, 08:53:58 PM »

Hope it runs as good as it looks!

TurboD · « **Reply #5 on:** August 18, 2014, 09:04:40 PM »

Nice job and yes tell us more. Your intentions / goals?

76kcafe · « **Reply #6 on:** August 19, 2014, 03:34:00 AM »

As of now the bike runs decent, it still needs some tuning. It's an 836 with an ATP turbo kit, 8 psi. All the work/paint was done by my brother, my dad, and I. My goal was to just build a custom looking dragbike. I don't really plan on racing it, just riding it a lot on the street. Thanks for the compliments!

TurboD · « **Reply #7 on:** August 19, 2014, 05:38:07 AM »

Very cool.

Greg H · « **Reply #8 on:** August 19, 2014, 12:27:12 PM »

That is one great looking bike

.

PeWe · « **Reply #9 on:** August 19, 2014, 01:23:17 PM »

Really nice build!!
Soon on Youtube? With sound

76kcafe · « **Reply #10 on:** August 19, 2014, 02:01:11 PM »

I did not make any videos of it yet. Maybe soon.

754 · « **Reply #11 on:** August 19, 2014, 03:03:58 PM »

I cut my sidestand mount off the frame, made a stand that fits in rear peg.
Lowered bike about another 3 inches at rear, and increase rake a bit in the right direction...for hard launches..and drags.

BPellerine · « **Reply #12 on:** August 19, 2014, 05:39:15 PM »

wow an old school hotrod that looks stunning and fast!bill

Jim F · « **Reply #13 on:** August 19, 2014, 05:39:38 PM »

Very nice indeed

Jim F · « **Reply #14 on:** August 20, 2014, 05:36:23 AM »

too bad all of us turbo guys couldn't get together for a group picture of our bikes

76kcafe · « **Reply #15 on:** August 20, 2014, 05:49:18 PM »

A group picture would be very cool

TurboD · « **Reply #16 on:** August 20, 2014, 05:51:44 PM »

Tell more. Engine work, turbo sizing, carb etc.

BLUE71TURBO · « **Reply #17 on:** August 20, 2014, 11:06:12 PM »

From one turbo guy to another....... GREAT JOB !

76kcafe · « **Reply #18 on:** August 21, 2014, 03:24:49 AM »

It's an 836. Stock crank, cycle x rods, forged JE 8.5:1 compression. Head has oversized valves. Norris turbo cam. The turbo is a B25. Carb is an hsr42. I believe the carb is a little to big for the engine.

andy750 · « **Reply #19 on:** August 21, 2014, 03:54:25 AM »

Great job! This bike has to be in BOTM!

cheers
Andy

MCRider · « **Reply #20 on:** August 21, 2014, 06:40:54 AM »

Quote from: 76kcafe on August 18, 2014, 07:00:20 PM

I made a post awhile ago about the turbo bike I was building. After 5 years the bike is finally finished so I thought I would share some pictures with you guys.

I got you beat on time to completion, but your result is beautiful. Hope it runs great too!

76kcafe · « **Reply #21 on:** August 21, 2014, 12:46:33 PM »

Blue71: what carb are you using and how much boost?

BPellerine · « **Reply #22 on:** August 21, 2014, 05:38:23 PM »

did you make the swingarm and how much over is it?bill

Jim F · « **Reply #23 on:** August 21, 2014, 06:04:47 PM »

wrong topic
just damn

76kcafe · « **Reply #24 on:** August 21, 2014, 06:14:25 PM »

The swing arm is 4" over. Steve carpenter "Carpy" made the swingarm.

Don R · « **Reply #25 on:** August 21, 2014, 10:05:05 PM »

It looks awesome, I'd love to find one of those tanks, the dragbike I'm doing had one but it was lost somewhere along the way before I got the bike.

BPellerine · « **Reply #26 on:** August 22, 2014, 05:50:44 PM »

thanks for the info.bill

SOHC Digger · « **Reply #27 on:** August 23, 2014, 05:19:01 PM »

Love this bike! Well done!!!

76kcafe · « **Reply #28 on:** August 23, 2014, 07:15:54 PM »

Thank you. Hopefully I can get it running a little better. It needs some tuning yet.

Dunk · « **Reply #29 on:** August 25, 2014, 01:12:45 PM »

Sweet bike. I believe I saw this at the two stroke club show in PA a couple weekends ago? There were a few SOHC4s there.

76kcafe · « **Reply #30 on:** August 25, 2014, 02:51:13 PM »

Yeah I was there at that show.

NitroHunter · « **Reply #31 on:** August 25, 2014, 06:51:21 PM »

I just love the look of Old School Custom Cool.
Nice job 76!

jaguar · « **Reply #32 on:** August 29, 2014, 03:33:21 PM »

Very cool bike. Love the color.
Really makes me want to build a drag bike. Ive always looked for a race drag frame, missed on a few years ago and really regret it.

News:

Author Topic: CB750 turbo dragbike build (Read 6220 times)