« previous next »
Pages: [1]   Go Down

Author Topic: F1 rear MC - correct order of parts?  (Read 749 times)

0 Members and 1 Guest are viewing this topic.

Offline Cevan

  • Enthusiast
  • **
  • Posts: 131
F1 rear MC - correct order of parts?
« on: August 30, 2014, 06:28:05 PM »
Can't seem to find the pictures I took of the parts when I disassembled the MC 3 years ago.  Is this right?

Logged

Offline goldarrow

  • one day, i'll be an
  • Old Timer
  • ******
  • Posts: 3,361
Re: F1 rear MC - correct order of parts?
« Reply #1 on: August 30, 2014, 08:32:23 PM »
That looks about right. Though it's a awhile since I replaced mine. 
Logged
Life Is Full Of Challenges - And My Backyard Is Full Of SOHC4's

CB550 K0
CB750 K0, K2, K23 JDM, K45, K5
And the little ones z50r, xr50r, st90


750k5 http://forums.sohc4.net/index.php?topic=114817.0

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,934
  • Bought her new 4/75
Re: F1 rear MC - correct order of parts?
« Reply #2 on: August 30, 2014, 08:39:07 PM »
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Cevan

  • Enthusiast
  • **
  • Posts: 131
Re: F1 rear MC - correct order of parts?
« Reply #3 on: September 03, 2014, 07:51:45 AM »
Just for posterity's sake, the above picture is wrong.  The rubber part on the far left should go on the aluminum piston.  Everything else was correct. 
Logged

Offline dlhoulton

  • Enthusiast
  • **
  • Posts: 177
Re: F1 rear MC - correct order of parts?
« Reply #4 on: September 03, 2014, 09:35:03 AM »
Cevan, it looks like you have everything in order but missing a piece. You have in the picture the check valve, spring, plastic cup (spring fits into it), then piston. It looks like you are missing the rubber piston seal. Here is a picture of the part I think you are missing.
Logged

Offline Cevan

  • Enthusiast
  • **
  • Posts: 131
Re: F1 rear MC - correct order of parts?
« Reply #5 on: September 03, 2014, 12:10:50 PM »
Quote from: dlhoulton on September 03, 2014, 09:35:03 AM
Cevan, it looks like you have everything in order but missing a piece. You have in the picture the check valve, spring, plastic cup (spring fits into it), then piston. It looks like you are missing the rubber piston seal. Here is a picture of the part I think you are missing.


Actually it's in the picture.  It's touching the check valve.  That's the piece I moved to the piston.
Logged
Pages: [1]   Go Up
« previous next »