Author Topic: Patina Hyena - 550/650 674cc Hybrid Cafe Build  (Read 384489 times)

0 Members and 1 Guest are viewing this topic.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #775 on: August 20, 2015, 02:03:54 PM »
That's a nice looking exhaust. This will definitely be an option, thanks Cal.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #776 on: August 20, 2015, 02:14:51 PM »
Dave - you and Don should check out a Ripple Rock Racers (www.ripplerockracers.com) in Canada for an exhaust. Couple of other guys use them on their 650 and they look awfully nice and comparable to the MGPWerks unit. Plus, Canadian/US exchange rates!

Approx US$460 for the pipe with no muffler in bare stainless.  Not bad.  Thanks for the tip.

I believe that Ripple Rock makes the billet triple clamps for Dime City Cycles.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #777 on: August 30, 2015, 06:30:21 PM »
Still waiting on parts for the rewire. In the meantime, I made up this wiring diagram for me to follow.


Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #778 on: August 30, 2015, 07:22:22 PM »

Just noticed you're missing a line from AUX to tail light to run the power for it.

I'm going I use the option for the one wire taillight. One wire to run from "brake" to do both taillight illumination and brake light.

It would be awesome if the m-unit had a little micro USB and you could upload settings that you create yourself. For example, since there's an accelerometer it can know when you brake hard, then it could pulse all rear lights in a panic stop. Or maybe a quick horn tap would do a "beep-beep" like you're getting someone's attention. The possibilities are endle...I mean...slightly more.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #779 on: August 31, 2015, 04:41:09 AM »

Those settings are adjusted through the setup menu options.  ;) nothing about a beep-beep though... That's what the MotoGP 4:1 is for  8)

Yup, there's a lot of cool options. Like I wasn't aware that I could've done a start/kill by holding the left blinker and headlight (or whatever it is) Could've saved some money by buying two 2 button m-switches instead of the 2 and 3 m-switch.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #780 on: August 31, 2015, 05:25:43 AM »

true, but you can use the dedicated 3rd button as a KILL in a moments notice. Remembering the sequence and getting it right in an urgent situation, well, let's just say whats a few bucks for clarity?

Agreed. But I still want to get access to the m-unit to upload my own configurations. As I understand it if I use the alarm option and it goes off, it'll turn off either if I cycle the key or by draining the battery if I'm not around. Would be nice to have duration settings on that.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #781 on: August 31, 2015, 08:38:02 AM »
Was welding and painting the tail section yesterday to hold the battery and my little disk lock. A grinder and paint make up for what the welder ain't...

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #782 on: August 31, 2015, 08:38:58 AM »
Also, just got my pistons back from coating, nice! I ended up going with Swain Tech and they came out really nice.

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,141
  • Sunny Central Florida
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #783 on: August 31, 2015, 08:49:45 AM »
Also, just got my pistons back from coating, nice! I ended up going with Swain Tech and they came out really nice.

Almost too purdy to install!
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #784 on: August 31, 2015, 08:54:26 AM »
Was welding and painting the tail section yesterday to hold the battery and my little disk lock. A grinder and paint make up for what the welder ain't...


Very nice, Dave.  Which model Shorai are you using?
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #785 on: August 31, 2015, 08:54:56 AM »
Also, just got my pistons back from coating, nice! I ended up going with Swain Tech and they came out really nice.


That is mighty slick!
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,569
  • SOHC4 member # 2605
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #786 on: August 31, 2015, 09:59:41 AM »
All kinds of expensive candy going into the build.  Looks great!
David- back in the desert SW!

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #787 on: August 31, 2015, 11:23:12 AM »

Was welding and painting the tail section yesterday to hold the battery and my little disk lock. A grinder and paint make up for what the welder ain't...


Very nice, Dave.  Which model Shorai are you using?

Thanks Don. I'm using the LFX14A2. Nice and small but still has enough CCA. And should still be fine for the 674 when that goes in.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #788 on: August 31, 2015, 11:25:21 AM »

Also, just got my pistons back from coating, nice! I ended up going with Swain Tech and they came out really nice.

Almost too purdy to install!

Almost, haha. But I'll have time to stare at them since they're not going to be going in until at least a few months from now.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #789 on: August 31, 2015, 11:30:30 AM »
All kinds of expensive candy going into the build.  Looks great!

Actually not really that bad. $40 a piston. And considering they're the 'apparent' industry leader in this stuff (or at least recommended from MRieck) then that's not too bad in my book. I blame CAL for the push! But I'm easily swayed.

In high school:
Friend- "here, drink this beer."
Me- "nah, I probably shouldn't."
Friend- "you sure? Ok, that's no probl..."
Me- "ok, if you insist."

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #790 on: August 31, 2015, 11:53:30 AM »

Was welding and painting the tail section yesterday to hold the battery and my little disk lock. A grinder and paint make up for what the welder ain't...


Very nice, Dave.  Which model Shorai are you using?

Thanks Don. I'm using the LFX14A2. Nice and small but still has enough CCA. And should still be fine for the 674 when that goes in.

Thanks, Dave.  Yeah, I think 210 CCA should be enough -- its the same energy spec as the larger battery to fit the stock battery sleeve in a more compact case.  I'm on it!
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 404
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #791 on: August 31, 2015, 06:18:43 PM »

All kinds of expensive candy going into the build.  Looks great!

Actually not really that bad. $40 a piston. And considering they're the 'apparent' industry leader in this stuff (or at least recommended from MRieck) then that's not too bad in my book. I blame CAL for the push! But I'm easily swayed.

In high school:
Friend- "here, drink this beer."
Me- "nah, I probably shouldn't."
Friend- "you sure? Ok, that's no probl..."
Me- "ok, if you insist."


Hanging with Cal and Don is cancer to the wallet. I made the wrong kinda friends here and developed expensive tastes

Parts are looking great

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #792 on: August 31, 2015, 08:14:29 PM »
I blame Dave for pushing me to dive headlong into my 650 project engine for The Hot Mess.  I would have happily taken another year to do it, but NO, Dave had to cajole me.   ;)
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #793 on: September 01, 2015, 05:26:45 PM »

I blame Dave for pushing me to dive headlong into my 650 project engine for The Hot Mess.  I would have happily taken another year to do it, but NO, Dave had to cajole me.   ;)

I accept full responsibility. These bikes will be like brothers from other mothers...or sisters from other misters, whichever you prefer.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #794 on: September 01, 2015, 07:24:45 PM »


I like all of those monikers.


1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #795 on: September 02, 2015, 05:09:16 AM »
Haha, awesome. Stepdaughters works for me. Maybe a family reunion should take place somewhere in middle America.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #796 on: September 02, 2015, 06:25:10 AM »
I wish I'd be ready by then. That would be a nice trip to break the newly rebuilt motor in, though.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #797 on: September 02, 2015, 07:38:17 AM »
I wish I could be ready or find myself at COTA. Maybe in April to see MotoGP and The Handbuilt Show.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,630
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #798 on: September 03, 2015, 02:38:30 PM »
Finally got my m-Unit, and two m-Switches. They're really beautifully made. The m-unit is heavier than I thought it would be. It has a nice weight to it that makes it feel like a quality piece. I got my stuff from TruNetWholesale, cheapest place I found. They have an eBay presence but I went through them directly.

Here's their eBay store:
http://ebay.to/1UvHWHy

And email:
truenetwholesale@gmail.com


Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,956
Re: Patina Hyena - Dave's '78 CB550K Cafe Build Thread
« Reply #799 on: September 03, 2015, 03:32:44 PM »
Dave,
Do you have a website for TruNet Wholesale?

Ron
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html