Author Topic: CB750 K4 Build - The Cafe Tracer (Read 118835 times)

budman · « **Reply #425 on:** October 01, 2016, 11:26:25 AM »

Thanks for the info. You would think someone would have come out with a billet aftermarket version by now. If I can't find one in the next week or so I think I'm going to have my machinist buddy make one. He's the guy that gave me the bike. I saw him this morning and told him about it and he said he broke four of them. Lol!

budman · « **Reply #426 on:** October 02, 2016, 05:42:41 AM »

Quote from: calj737 on October 01, 2016, 10:54:09 AM

Or Bill Benton. He's bound to have at least 100 squirreled away

I posted in the Wanted section and Bill replied. Just paid for one.

budman · « **Reply #427 on:** October 06, 2016, 04:55:50 PM »

I got the clutch lifter plate from Bill today. It doesn't have the little stem on the piece that goes through the center of the bearing like the other two broken ones I have. Is there any reason why the one I got from Bill won't work?

budman · « **Reply #428 on:** October 08, 2016, 01:08:58 PM »

I didn't break the lifter plate replacement I got from Bill. Yoo-hoo! The center piece popped out of the bearing with a little tap so I replaced it with one that has the center stem. Clutch is installed completely.

I also rebuilt the starter, tested it and got it installed.

Stev-o · « **Reply #429 on:** October 08, 2016, 08:25:33 PM »

Looking good all buttoned up, Bud!

540nova · « **Reply #430 on:** October 09, 2016, 07:39:51 AM »

When I scrolled up, and this engine shot came into view, I was blinded by the chrome-like shine! Looks amazing.

Sent from my iPhone using Tapatalk

budman · « **Reply #431 on:** October 09, 2016, 12:53:02 PM »

Thanks guys.

budman · « **Reply #432 on:** October 15, 2016, 03:39:35 PM »

Charging side back together.

Stev-o · « **Reply #433 on:** October 16, 2016, 08:51:36 AM »

Looks like you are the master polisher, Bud! Can I send you some covers?!

540nova · « **Reply #434 on:** October 16, 2016, 08:58:11 AM »

Yea, I'm super impressed by those covers. I even showed my wife!

Sent from my iPhone using Tapatalk

budman · « **Reply #435 on:** October 16, 2016, 09:03:59 AM »

Hah! I had the covers chromed. I did polish them a little bit 'cause they've been sitting around for a while and have gotten a little dirty and dusty, but that's all the credit I can take.

budman · « **Reply #436 on:** October 28, 2016, 05:37:58 PM »

The wiring supplies are coming in. More stuff arriving tomorrow. I probably have enough for at least two bikes.

budman · « **Reply #437 on:** October 29, 2016, 03:52:49 PM »

I wasn't 100% happy with the seat so I recovered it. The leather I used the first time was too thick and I couldn't get it wrapped around the edges of the seat pan cleanly. I used some thinner leather this time and got much better results.

540nova · « **Reply #438 on:** October 29, 2016, 04:40:31 PM »

Awesome build, except for one thing. No offense, but in my opinion, those 750 letters belong on a mailbox, not on this beautiful bike. The quality of everything is top notch, then you have those stickers. They just look too cheap, and shade-treeish. No offense meant, just an opinion.

Sent from my iPhone using Tapatalk

budman · « **Reply #439 on:** October 29, 2016, 05:17:51 PM »

Quote from: 540nova on October 29, 2016, 04:40:31 PM

Awesome build, except for one thing. No offense, but in my opinion, those 750 letters belong on a mailbox, not on this beautiful bike. The quality of everything is top notch, then you have those stickers. They just look too cheap, and shade-treeish. No offense meant, just an opinion.

Sent from my iPhone using Tapatalk

Shade tree, my backside. I spent a lot of time designing that aspect. I like it. I think it adds a bit of an old school race element to the build.

budman · « **Reply #440 on:** October 30, 2016, 02:50:41 PM »

I shot the firsts coats of clear on the tail section. Gotta let this cure for a week, sand it and hit with some more coats until all the wood grain is filled.

540nova · « **Reply #441 on:** October 30, 2016, 03:42:11 PM »

Quote from: budman on October 29, 2016, 05:17:51 PM

Quote from: 540nova on October 29, 2016, 04:40:31 PM
Awesome build, except for one thing. No offense, but in my opinion, those 750 letters belong on a mailbox, not on this beautiful bike. The quality of everything is top notch, then you have those stickers. They just look too cheap, and shade-treeish. No offense meant, just an opinion.

Sent from my iPhone using Tapatalk

Shade tree, my backside. I spent a lot of time designing that aspect. I like it. I think it adds a bit of an old school race element to the build.

Hey, if YOU like it, that's all that matters. Forgive me for the unsolicited opinion. Can't wait to see the final product. Awesome bike.

Sent from my iPhone using Tapatalk

riverfever · « **Reply #442 on:** October 30, 2016, 04:47:56 PM »

The wooden tail section is gorgeous bud. That's a lot of talent.

SOHC4 Cafe Racer Fan · « **Reply #443 on:** October 30, 2016, 07:46:14 PM »

Damn. That's furniture, art and function -- all in one!

riverfever · « **Reply #444 on:** October 30, 2016, 07:51:46 PM »

It really is too nice for an a$$ to be close to.

Stev-o · « **Reply #445 on:** October 30, 2016, 09:17:30 PM »

Wow, talk about wood! Nice job Bud.

budman · « **Reply #446 on:** October 31, 2016, 05:42:21 AM »

Thanks, fellers. The basswood stripes came out more orange than I was hoping. I used it because of the pale color. I've worked with it before, but never used this particular urethane clear on it. The clear is water white, no yellow tint. Don't know why it turned so dark. I knew it wasn't going to be a perfect match to the stripes on the tank, but was hoping I'd be close. Oh, well. Gonna run with it. On the other hand, the walnut matches the Sunset Bronze Mica almost perfectly.

budman · « **Reply #447 on:** October 31, 2016, 09:00:40 AM »

Quote from: CB750 Cafe Racer Fan on October 30, 2016, 07:46:14 PM

Damn. That's furniture, art and function -- all in one!

It is furniture. I'm going to be sitting on it, right?

Retro Rocket · « **Reply #448 on:** October 31, 2016, 04:20:24 PM »

Basswood is quite soft so dents easily, I'm familiar with it as a wood used in guitar making....

budman · « **Reply #449 on:** October 31, 2016, 04:34:11 PM »

Quote from: Retro Rocket on October 31, 2016, 04:20:24 PM

Basswood is quite soft so dents easily, I'm familiar with it as a wood used in guitar making....

That's what I've used it for, but I always put a hard finish on it. The stuff I used on my rear tail piece was more dense and a little heavier than what I've used before.

News:

Author Topic: CB750 K4 Build - The Cafe Tracer (Read 118835 times)