Author Topic: Increasing mileage on mechanical odometer?  (Read 1250 times)

0 Members and 1 Guest are viewing this topic.

Offline eideteker

  • Enthusiast
  • **
  • Posts: 180
Increasing mileage on mechanical odometer?
« on: September 19, 2014, 01:21:39 PM »
Preamble: this does not have anything to do with odometer fraud, please read on!

I want to use this old Suzuki Hustler gauge (like this) on my CB500, but the mileage is way less than what the bike actually has on it.  I know I can go mileage exempt but I'd really like to have the odometer reflect the "true" mileage.  Is there any way to set it to a higher mileage?  I already have the gauge apart and spinning with a drill bit (but that's going to take ages and I'd rather not put the wear on the instrument or my drill).  Any ideas?
"Spit on the tip of your finger, lube the inside of the hole, and then wiggle it around and twist a bit back and forth as you apply pressure." - mystic_1

1973 CB500K - not bad for a first bike
2009 SFV650 - torquey, reliable 90° V-twin

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Increasing mileage on mechanical odometer?
« Reply #1 on: September 19, 2014, 01:26:52 PM »
Gonna have to take it apart and roll em forward. I have done it with 750 gauges. Probably about the same thing. I am curious how that will work it's a cool gauge.

Offline eideteker

  • Enthusiast
  • **
  • Posts: 180
Re: Increasing mileage on mechanical odometer?
« Reply #2 on: September 19, 2014, 01:33:13 PM »
Yeah it is cool, that's why I'm so set on using it.  8)

How do I go about moving the numbers?  Like I said, I have the odometer part out and I'm increasing the mileage very slowly at the moment...

"Spit on the tip of your finger, lube the inside of the hole, and then wiggle it around and twist a bit back and forth as you apply pressure." - mystic_1

1973 CB500K - not bad for a first bike
2009 SFV650 - torquey, reliable 90° V-twin

Offline eideteker

  • Enthusiast
  • **
  • Posts: 180
Re: Increasing mileage on mechanical odometer?
« Reply #3 on: September 19, 2014, 01:38:51 PM »
Obligatory bikes pic, just because...

"Spit on the tip of your finger, lube the inside of the hole, and then wiggle it around and twist a bit back and forth as you apply pressure." - mystic_1

1973 CB500K - not bad for a first bike
2009 SFV650 - torquey, reliable 90° V-twin

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: Increasing mileage on mechanical odometer?
« Reply #4 on: September 19, 2014, 01:43:54 PM »
Looks like that little tab on top where the needles mount, ya need to pry that thing loose from the crimps and then CAREFULLY loosen things up until you can roll the numbers freely. I did this and then used 2 part epoxy to hold the crimps back in place.

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: Increasing mileage on mechanical odometer?
« Reply #5 on: September 20, 2014, 01:24:21 AM »
Heck, just hook it up and ride the snot out of it, the mileage will increase.
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline eideteker

  • Enthusiast
  • **
  • Posts: 180
Re: Increasing mileage on mechanical odometer?
« Reply #6 on: September 20, 2014, 09:25:54 PM »
Will wheelies make my mileage increase faster?
"Spit on the tip of your finger, lube the inside of the hole, and then wiggle it around and twist a bit back and forth as you apply pressure." - mystic_1

1973 CB500K - not bad for a first bike
2009 SFV650 - torquey, reliable 90° V-twin

Offline brandEn

  • Old Timer
  • ******
  • Posts: 3,205
Re: Increasing mileage on mechanical odometer?
« Reply #7 on: September 20, 2014, 09:30:43 PM »
Actually no...
lol

Offline eideteker

  • Enthusiast
  • **
  • Posts: 180
Re: Increasing mileage on mechanical odometer?
« Reply #8 on: September 20, 2014, 09:52:40 PM »
 ;D


But seriously, I took another look at the odometer assembly and I don't see the part you are referring to...I guess I just don't know what I'm looking for.
"Spit on the tip of your finger, lube the inside of the hole, and then wiggle it around and twist a bit back and forth as you apply pressure." - mystic_1

1973 CB500K - not bad for a first bike
2009 SFV650 - torquey, reliable 90° V-twin

Offline wowbagger

  • Not much of an
  • Expert
  • ****
  • Posts: 853
Re: Increasing mileage on mechanical odometer?
« Reply #9 on: September 21, 2014, 04:26:42 PM »
I did this exact thing with and early cb77 Superhawk gauge on my cb500. Branden had it right. Remove the retainer clip on the end. Then, separate the wheels, spin them to the desired reading, realign and replace the lock clip.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,432
  • Central Texas
Re: Increasing mileage on mechanical odometer?
« Reply #10 on: September 21, 2014, 05:12:48 PM »
X6 does have cool gauge, that was my first bike.  250cc twin and would do 100 mph. 
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline eideteker

  • Enthusiast
  • **
  • Posts: 180
Re: Increasing mileage on mechanical odometer?
« Reply #11 on: September 21, 2014, 06:00:47 PM »
I did this exact thing with and early cb77 Superhawk gauge on my cb500. Branden had it right. Remove the retainer clip on the end. Then, separate the wheels, spin them to the desired reading, realign and replace the lock clip.

I'll take another look tomorrow, thanks.

X6 does have cool gauge, that was my first bike.  250cc twin and would do 100 mph. 

Cool!  Yeah I've heard that they were bad little bikes, but I definitely love the gauge.  Only thing I'm sweating is the ratio, I've searched all over and couldn't find the Suzuki speedo ratio for the X6 and whether it matches the Honda or not.  I know another member used the X6 gauge on his 750 (I think?) and had a member (count_Chockula) redo the face for him.
"Spit on the tip of your finger, lube the inside of the hole, and then wiggle it around and twist a bit back and forth as you apply pressure." - mystic_1

1973 CB500K - not bad for a first bike
2009 SFV650 - torquey, reliable 90° V-twin