Author Topic: dual disk on a cb750k 1976  (Read 477 times)

0 Members and 1 Guest are viewing this topic.

Offline bluechiphank

  • Full Member
  • *
  • Posts: 2
dual disk on a cb750k 1976
« on: September 27, 2014, 08:05:47 PM »
I have been searching for days . I am looking for a how to with a shopping list and have had  no luck. I am new to the forum and I have to pull the front end off to change the neck bearings. Might be a good time to convert to dual disk and tapered neck bearings. Thank you henry

Offline AbbyRider

  • Hot Shot
  • ***
  • Posts: 252
Re: dual disk on a cb750k 1976
« Reply #1 on: September 27, 2014, 08:43:40 PM »
There are plenty of threads on this in the forum. Might just not be using the right search bar? Anyways - here's one of the threads:

http://forums.sohc4.net/index.php?topic=53532
'98 VTR1000 Superhawk
'78 CB750F
'77 CB750F (in the works)
'81 KZ650 sitting in pieces in my basement

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: dual disk on a cb750k 1976
« Reply #2 on: September 27, 2014, 11:15:24 PM »
+1 to the above post. It also includes my fastener checklist....
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mineā€¦"