« previous next »
Pages: [1]   Go Down

Author Topic: 350f coil/kill switch wiring  (Read 380 times)

0 Members and 1 Guest are viewing this topic.

Offline dodieninja

  • Full Member
  • *
  • Posts: 48
350f coil/kill switch wiring
« on: October 07, 2014, 12:55:14 PM »
I was playing around with getting my bike to finally run today and found something interesting. The black/white wire to the coils always has power to it even with the kill switch disconnected. the black/white wire is in a double connector with a black wire. Is this how its supposed to be set up? or did a PO screw something up?
Logged
In the beginning the Universe was created. This has made a lot of people very angry and has been widely regarded as a bad move.
 
    Douglas Adams

Offline HondanutRider

  • Ride often - ride long - ride SAFE...and be an
  • Expert
  • ****
  • Posts: 1,283
Re: 350f coil/kill switch wiring
« Reply #1 on: October 07, 2014, 01:51:00 PM »
The kill switch is supposed to supply power to the coils through a black/white wire.  With the kill switch off, no power is provided the coils.  That is the standard/stock wiring connection.
Logged
Pages: [1]   Go Up
« previous next »