« previous next »
Pages: [1]   Go Down

Author Topic: RC distributor  (Read 1643 times)

0 Members and 1 Guest are viewing this topic.

Offline cbr954

  • Hot Shot
  • ***
  • Posts: 402
RC distributor
« on: October 12, 2014, 02:33:53 PM »
Do all the RC distributor drive housings have the small hole in this picture?  Mine starts to leak oil after a short ride and it is coming from this hole.  Its definitely not the seal because I can see the oil trail from this vent hole when I pull the housing.  It goes all the way through into where the distributor goes into the housing.  I am assuming it is a vent to keep pressure from building up but it starts leaking oil after just a couple of miles.   I lowered the oil level a little bit also from spec just to see if it stopped but still leaks.
Logged
03 CBR954RR, 72 750 chopper(970cc
F2 head), 2017 CRF450R, 2001 CR250R, 72 CB500, 79 XR250, 04 CRF50,70's soon to be rebuilt cb750 drag bike.

Offline sohc boy

  • Hot Shot
  • ***
  • Posts: 346
Re: RC distributor
« Reply #1 on: October 12, 2014, 10:40:15 PM »
i have a RC, drive ,an yes, has a vent hole the same , yes ,i too get bit of oil leakage from it
Logged
i live by the voice inside my head

Offline cbr954

  • Hot Shot
  • ***
  • Posts: 402
Re: RC distributor
« Reply #2 on: October 13, 2014, 06:08:36 PM »
Thanks.  I was hoping I could plug it off, guess it will have to sit on the shelf because it leaks oil and runs out onto the exhaust.
Logged
03 CBR954RR, 72 750 chopper(970cc
F2 head), 2017 CRF450R, 2001 CR250R, 72 CB500, 79 XR250, 04 CRF50,70's soon to be rebuilt cb750 drag bike.

Offline jonnycakes

  • Enthusiast
  • **
  • Posts: 206
Re: RC distributor
« Reply #3 on: October 14, 2014, 04:23:54 PM »
I'll buy it back if your not gonna run it.
Logged
'Matic-Fanatic

Offline cbr954

  • Hot Shot
  • ***
  • Posts: 402
Re: RC distributor
« Reply #4 on: October 14, 2014, 04:55:48 PM »
I am going to try some stuff with it.  I might decide to stick it on my drag bike.  I dont think it will leak in that short amount of run time.
Logged
03 CBR954RR, 72 750 chopper(970cc
F2 head), 2017 CRF450R, 2001 CR250R, 72 CB500, 79 XR250, 04 CRF50,70's soon to be rebuilt cb750 drag bike.

Offline BPellerine

  • Master
  • *****
  • Posts: 2,222
Re: RC distributor
« Reply #5 on: October 14, 2014, 05:31:43 PM »
is there any way to run a line from it upwards so that it does not come straight out?bill
Logged
1978 CB 750K ard and webers
another anfob

Offline cbr954

  • Hot Shot
  • ***
  • Posts: 402
Re: RC distributor
« Reply #6 on: October 15, 2014, 05:45:39 PM »
Yeah I am going to do some looking and see how I could run a vent line up and out of the housing.
Logged
03 CBR954RR, 72 750 chopper(970cc
F2 head), 2017 CRF450R, 2001 CR250R, 72 CB500, 79 XR250, 04 CRF50,70's soon to be rebuilt cb750 drag bike.

Offline jonnycakes

  • Enthusiast
  • **
  • Posts: 206
Re: RC distributor
« Reply #7 on: October 22, 2014, 03:14:24 PM »
i think the little spot of oil is worth the look
Logged
'Matic-Fanatic

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: RC distributor
« Reply #8 on: October 22, 2014, 04:01:37 PM »
I don't recall leaking being a problem.....been a long time though, blue72turbo runs one. They won't let you run if it's leaking oil and they see it!  ;D
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline BLUE71TURBO

  • Master
  • *****
  • Posts: 1,849
Re: RC distributor
« Reply #9 on: November 11, 2014, 07:17:06 PM »
Quote from: Bill/BentON Racing on October 22, 2014, 04:01:37 PM
I don't recall leaking being a problem.....been a long time though, blue72turbo runs one. They won't let you run if it's leaking oil and they see it!  ;D

              That's BLUE71TURBO !  HA HA !   I do not run a R.C.angle drive. I'm running a A.R.D. CDM  Magneto.  I do have a R.C angle drive for a
               KAWASAKI 900-1000 .  Mine has the small hole. It's for oil to get to the upper distributor drive or pressure relief i'm thinking. I don't see
               I don't see how yours is leaking. The hole should be sealed against the engine case.   ;)
Logged
Remember; Before you can be old and wise, you must first be young and stupid !

Offline cbr954

  • Hot Shot
  • ***
  • Posts: 402
Re: RC distributor
« Reply #10 on: November 12, 2014, 06:34:46 AM »
The hole doesn't seat up against anything it just vents into the open space between the cases and the distributor housing.  I agree it is a pressure relief for the distributor.
Logged
03 CBR954RR, 72 750 chopper(970cc
F2 head), 2017 CRF450R, 2001 CR250R, 72 CB500, 79 XR250, 04 CRF50,70's soon to be rebuilt cb750 drag bike.

Offline BLUE71TURBO

  • Master
  • *****
  • Posts: 1,849
Re: RC distributor
« Reply #11 on: November 13, 2014, 10:18:59 PM »
  Here is the location of the vent hole on the R.C. Kawasaki angle drive. Way different than the Honda version.


               
Logged
Remember; Before you can be old and wise, you must first be young and stupid !
Pages: [1]   Go Up
« previous next »