Author Topic: Hello from SoCal + pics! (Read 6694 times)

Jinxracing · « **on:** October 02, 2006, 10:45:30 AM »

Hi everyone, just introducing myself. I live in Dana Point, CA and recently picked up a 1970 CB750 out of the Pennysaver for FREE. That's the good part...the bummer is that the engine is completely disassembled in crates and looks as though it was stored in the bilge of a ship–lots of rust. So, I think there will be a few engine component purchases in my future! Plans are for a cafe project, and I'm really glad that I decided to go with a CB750 rather than a BMW R-series (which I was also considering). I've got to admit, the price may have had something to do with my decision.

My frame tag lists 8/70 as the build date, and the serial starts with CB750-105...am I correct in assuming that I've got a K1?

Jim

dusterdude · « **Reply #1 on:** October 02, 2006, 10:54:14 AM »

welcome jim,probably but im not sure.

jsaab2748 · « **Reply #2 on:** October 02, 2006, 04:00:19 PM »

Jim, a little off topic as far as your question is concerned,(I own a k5), but how far is Dana point
from San Clemente? I was there recently, that sounds familiar. I'd bet you've ridden the Ortega Highway over to Elsinore? That road RULES!!!!! Was wishing I had my 750 while I was there.
Welcome to the board sir.

Bob Wessner · « **Reply #3 on:** October 02, 2006, 05:13:49 PM »

Quote from: Jinxracing on October 02, 2006, 10:45:30 AM

My frame tag lists 8/70 as the build date, and the serial starts with CB750-105...am I correct in assuming that I've got a K1?

Jim

Yes, K1 check here for the model guide to the K's.

http://www.sohc4.us/index.php?option=com_content&task=view&id=39&Itemid=49

Jinxracing · « **Reply #4 on:** October 02, 2006, 06:09:59 PM »

Quote from: jsaab2748 on October 02, 2006, 04:00:19 PM

Jim, a little off topic as far as your question is concerned,(I own a k5), but how far is Dana point
from San Clemente? I was there recently, that sounds familiar. I'd bet you've ridden the Ortega Highway over to Elsinore? That road RULES!!!!! Was wishing I had my 750 while I was there.
Welcome to the board sir.

Yes, Dana Point abuts San Clemente to the north, and I live about 10 minutes from the western end of Ortega Hwy. Even with the occasional slow freight-train of cruisers, you're right, that road is amazing! My K1 is going to be getting a regular workout there when it's done.

Jim

brian · « **Reply #5 on:** October 04, 2006, 10:31:26 AM »

Welcome Jim , I'm on the other side of the Ortega Hwy around Lake Elsinore , my 750K4 likes that road also. Good luck with your project

Jinxracing · « **Reply #6 on:** October 08, 2006, 08:26:51 AM »

Quote from: brian on October 04, 2006, 10:31:26 AM

Welcome Jim , I'm on the other side of the Ortega Hwy around Lake Elsinore , my 750K4 likes that road also. Good luck with your project

Hi Brian, maybe one of these days mine will make it over the hill. Meet you at the Lookout!

Jinxracing · « **Reply #7 on:** October 08, 2006, 08:35:04 AM »

Here are some pics of my project "as received" and sitting in my shop:

Lovingly stored since 1975 $:-\$ GL1000 front end is on its way.

Ill-advised single-shock setup...

Apparently the engine components were stored underwater...anyone need a low-mileage cam?

my78k · « **Reply #8 on:** October 08, 2006, 10:33:08 AM »

After seeing those pics I am suddenly very happy with my beast of a K8...she's rusty but not THAT rusty

Jinxracing · « **Reply #9 on:** October 08, 2006, 11:15:12 AM »

Quote from: my78k on October 08, 2006, 10:33:08 AM

After seeing those pics I am suddenly very happy with my beast of a K8...she's rusty but not THAT rusty

Yeah, I figure if I knew what I was doing I'd be pretty scared. Luckily, I haven't the foggiest...

brian · « **Reply #10 on:** October 08, 2006, 11:45:53 AM »

The Ouitlook Cafe has been there awhile and hope it will be there a long while still as it looks as if you have your work cut out for you !

mrbreeze · « **Reply #11 on:** October 08, 2006, 12:09:24 PM »

Hey Jinx,Welcome to the club! You have some good things going on....you have a hell of a winter project going on and winter is coming on.You found this site so you will have answers to the mazillion questions you WILL be asking.After seeing that box of parts(the one that looks like it was in the lake for awhile),you might want to get the ebay going and find a used motor for cheap.If it gets to be Feb. or March and you don't think you will be ready to go by May or June,you might consider getting a bike that is already up and running so you don't miss the 2007 season. The project will still be there waiting.Whatever happens,good luck to you and enjoy!!!!!

Jinxracing · « **Reply #12 on:** October 08, 2006, 02:46:04 PM »

Quote from: mrbreeze on October 08, 2006, 12:09:24 PM

Hey Jinx,Welcome to the club! You have some good things going on....you have a hell of a winter project going on and winter is coming on.You found this site so you will have answers to the mazillion questions you WILL be asking.After seeing that box of parts(the one that looks like it was in the lake for awhile),you might want to get the ebay going and find a used motor for cheap.If it gets to be Feb. or March and you don't think you will be ready to go by May or June,you might consider getting a bike that is already up and running so you don't miss the 2007 season. The project will still be there waiting.Whatever happens,good luck to you and enjoy!!!!!

Thanks MrBreeze! The eBay buying orgy started about a week ago. Right now I'm assembling parts to do a GL1000 front end swap; just about have all the parts on their way. Noel stopped by yesterday with his CB500 and helped me recycle some Newcastles. I got a closeup look at his GL1000 setup and seeing it in person helped alot. I'm starting with the rolling chassis, then when that's ready to go I figure I'll get to the motor. The more I think about it the more I'm leaning towards buying a salvaged motor out of a "running" bike (about $400). Makes me a little nervous as to how long it'll last, but anything's better than what I've got in those crates. Luckily, the headers and carbs that came with the bike look ok/rebuildable. Maybe someday I'll take the case I've got and build a real screamer out of it.

mrbreeze · « **Reply #13 on:** October 08, 2006, 09:19:59 PM »

Well......there ya go then!!!!....Take pics & post as ya go....people here dig that(including me!!).I'm also doing the front end on mine as the official 06-07 winter project. My fork seals leak like a pig.

Noel · « **Reply #14 on:** October 11, 2006, 08:31:42 PM »

Jim's a good guy, and he's not stingy with the beer. His handrolled cigarettes look like doobies, though, and I about crapped myself when he pulled one out on the sidewalk in front of his place and lit up.

Let me know when you want to stop by and pick up those forks.

Noel · « **Reply #15 on:** October 11, 2006, 08:37:17 PM »

Quote

My fork seals leak like a pig.

Funny as hell. Jim sends me an email asking to get a look at my front end setup and on the 10 mile ride to his place my right fork seal blows wide open. I show up to his place with fork oil literally dripping down the fork leg.

Impressed the hell out of him, I'm sure.

mrbreeze · « **Reply #16 on:** October 11, 2006, 09:07:33 PM »

Sorry to hear that.Looks like I'm not the only one doing up a fork job. Could be worse I guess....at least the motor is still screaming along!!!

Noel · « **Reply #17 on:** October 11, 2006, 09:27:26 PM »

Quote

Sorry to hear that.

Nah. Old bikes. We learn not to sweat the small stuff, eh?

Jinxracing · « **Reply #18 on:** October 12, 2006, 02:42:21 AM »

Quote from: Noel on October 11, 2006, 08:37:17 PM

Quote
My fork seals leak like a pig.
Funny as hell. Jim sends me an email asking to get a look at my front end setup and on the 10 mile ride to his place my right fork seal blows wide open. I show up to his place with fork oil literally dripping down the fork leg.

Impressed the hell out of him, I'm sure.

Yeah, I suppose I'd better pick up that other set of fork legs before you swap them out with the ones that are blowing seals, eh?

Actually, I was impressed with the front end swap...must have been a real #$%* working out the steering stem issues on the 500, and I think you made the best of a difficult situation with the old bar riser holes. Once we get those axle spacers done it'll be sweet. That license plate bracket has got to go though! It was all I could do to keep from hauling out the break/shear and making something on the spot.

This weekend I've got family coming from out of town, but after that I'm good through Saturday. I'll get in touch after the weekend and we'll figure it out.

The eBay feeding frenzy is over for awhile, and I picked up some goodies for the swap:

'76 GL1000 master cylinder
'75 GL1000 19" aluminum front wheel with rotors
'75 GL1000 triple clamps
'77 GL1000 17" aluminum rear wheel (gonna be $110 for custom spokes & nipples dammit, guess Buchanan's doesn't stock a set to lace up a 17" rim)
'76 GL1000 calipers with brackets & manifold/switch
'78 GL1000 front axle clamps

Almost there...

Rsnip988 · « **Reply #19 on:** October 12, 2006, 06:55:50 AM »

so you're turning a 750k1 into a goldwing?

Let me know how it works

rks

Jinxracing · « **Reply #20 on:** October 12, 2006, 09:04:28 AM »

Quote from: Rsnip988 on October 12, 2006, 06:55:50 AM

so you're turning a 750k1 into a goldwing?

Let me know how it works

Yeah, once I get the front end and rear wheel on, then I'll just have to replace the frame and motor with goldwing pieces and I'll be done!

kslrr · « **Reply #21 on:** October 12, 2006, 03:32:21 PM »

Hey, welcome from a fellow SoCal'r. I grew up in Costa Mesa (now in Garden Grove) and I would ride my 350four up and down Ortega back in the '80's. Now the bike is a project as well. Hope to ride it soon again after we move out to Lake Elsinore.

Noel · « **Reply #22 on:** October 12, 2006, 08:22:18 PM »

Quote

That license plate bracket has got to go though! It was all I could do to keep from hauling out the break/shear and making something on the spot.

Hey, I like my cobbled-together-out-of-crap-I-found-laying-around-in-the-garage-while-drunk license plate bracket! You think I'm some kind of OC choppers made-from-billet ho-mo-sexual?!?

Jinxracing · « **Reply #23 on:** October 12, 2006, 09:58:35 PM »

Quote from: Noel on October 12, 2006, 08:22:18 PM

Quote
That license plate bracket has got to go though! It was all I could do to keep from hauling out the break/shear and making something on the spot.

Hey, I like my cobbled-together-out-of-crap-I-found-laying-around-in-the-garage-while-drunk license plate bracket! You think I'm some kind of OC choppers made-from-billet ho-mo-sexual?!?

I'm just thinking about your safety Noel...that license plate flaps around like a wounded pigeon and is probably the cause of the list to port indicated by your off-center freeway stripe...reminds me of an abandoned schooner in a strong gale. I'll have to cite the, "perverse invisibility of insane proportion" rule as the only explanation as to why you would actually claim to like that #$%*ty little piece of twisted galvanized strap metal. Or maybe it's just your own personal manifestation of the phrase, "One tiny flaw, because perfection is for God alone"?

But hey, if you're into it who am I to argue?

Rsnip988 · « **Reply #24 on:** October 12, 2006, 10:01:40 PM »

lol @ flappin like a wounded pigeon

RKS

News:

Author Topic: Hello from SoCal + pics! (Read 6694 times)

jsaab2748

brian

brian