Topic: Show me your 350/400F, Little F'ers thread? Small blocks Project status reports

[Don R]

 Nice ride, thanks for sharing the pictures,

[strynboen]

biggest brat seat,, im ever seeen...nice to have some more danes inn..

[knowsnothing]

My CB375F    Desperately needs paint. 

[calj737]

My CB375F    Desperately needs paint. 

Desperately needs the dents knocked out of the tank, and then a good cut/buff and polish. Side covers probably need paint, but I bet that tank will come up pretty darn nicely.

[Don R]

 I'm a fan of  a little patina. Of course it's all personal taste. I had good luck pulling dents with the hot glue kit. if the glue is good enough it doesn't harm the paint.

 Is there rhyme or reason to which 400F's came with paint matching side covers and which ones were black?

[MoMo]

I'm a fan of  a little patina. Of course it's all personal taste. I had good luck pulling dents with the hot glue kit. if the glue is good enough it doesn't harm the paint.

 Is there rhyme or reason to which 400F's came with paint matching side covers and which ones were black?

only that the 75s had matching side cover colors, the 76 models had black side covers as did the 77. 

[calj737]

You have to be careful with hot glue pulling dents where there is taped stripes. The glue and pulling action will pull the tape clearly away from the metal tank in very short order. Open metal areas, yep, works great on some dents. But use care near tape...

[Don R]

 My red 76 has black side covers but the yellow 77 had yellow ones. doesn't matter, the PO lost one, now they will all be black.

[knowsnothing]

Ha yeah, there is a big shallow dent on the right side as you all can see.  Rest of the tank is in good shape.  I guess will have to try to pull it with glue now.  Don/Cal, do you guys have a favorite brand?

[calj737]

Requires a bit of a "kit"

http://www.autobodytoolmart.com/glue-pulling-dent-repair-c-544.aspx

[Don R]

 I have a 76 400f with pitted fork tubes, are there any popular fork swaps without getting too big and heavy? Dual discs would be cool too.

[seanbarney41]

IIrc, 550 frontend swaps right on for 35mm tubes and dual disc same as 750

[Don R]

   Cool, I'll check it out, thanks. I'm working on the two 400F's I found last year, I'm putting all the original and new parts on the yellow 77 original paint bike and the freshly painted red 76 bike will be the modified bike. 

[Don R]

 I found a farm fresh Green 1973 cb350 four, we literally took it out of a truck full of straw. Dark Green, needs sidecovers, an exhaust and a lot of TLC. I'm seeing 400f handlebars and a cut down seat. I get the title at 10AM and will post pics as soon as I can figure out how to get them off my I phone onto here.
 It has the tool kit, warranty book, manual, service record and the original parts list from the crate it came in.

[Don R]

 Is there a source for new sidecovers? The usual sources show nothing. DSS, Honda, etc,

 This new to me barn find 350 spins like there aren't any pistons, I'll check for compression and see what's up. If it's gone south, I might consider a 350F/400F hybrid. Maybe a 400F frame and engine with the 350 tank, forks, headlight, matching color sidecovers but with 400F logos and a 400 header.
 I have a friend jonesing for the 350, what to do, what to do, hmmm.

 I see this with cb400f handlebars, bar end mirrors, early 750 short turn signal stalks and K0 rear signal mounts, a 400f grab bar handle, and a chromed reverse cone muffler on each side after the 4-2 adapters that lost their mufflers.

[Don R]

 This one just got new rims, neck bearings, greased the wheel bearings, spokes, tires, cables, right control, and better forks, rebuilt the caliper, I polished things a bit too and made the wiring stock. Before picture, the muffler wants to be stock too. I had it for sale in the classifieds here, nobody wanted it cheap. I might have spent too much to sell it now.

[Don R]

This is the original 400 project until it got parted out for the yellow bikes partial restoration work. I had bought new parts for it then got the yellow one back. It has everything to go back together but it gets the non original parts like the yellow accell plug wires.

[seanbarney41]

Don, I wanted that yellow 400, you are just a little too far away

[Don R]

Don, I wanted that yellow 400, you are just a little too far away

 Distance can be a deal breaker. I sold the green 350 at the drag strip today. I never unloaded it.

[MoMo]

Don, I wanted that yellow 400, you are just a little too far away

 Distance can be a deal breaker. I sold the green 350 at the drag strip today. I never unloaded it.

That is good, Don, you most likely would have put too much into the 350 to make it worthwhile...Larry

[gtmdriver]

I've had this about 8 weeks now.



So far I've replaced the rear wheel bearings, brake shoes, chain and sprockets, all the ignition components including fitting a Boyer Bransden electronic unit and generally tidied the bike up. I managed to get a 'Universal' carrier to fit too.

It's got a non standard headlamp (which I had to fit as it had a handlebar fairing on when I bought it and the lamp unit wouldn't fit back into the Honda headlamp shell) and a non standard 4 into 4 exhaust.

According to the documentation it should be green.

[Don R]

 The devil wanted me to put the 350F  front end, tank and seat on a 400F with 400 handlebars and some color matched side covers.
 That said, the 350 deserved better, the guy that bought it wants to keep it as original as possible, even as far as using used non rusty spokes from other honda 18" wheels.
 Now I'm looking for 400 fork tubes or a front end to swap. I was told 400's have the shortest forks.

 I ordered some 750 K0 short front signal stalks for the early turn signals on the red 400, the 90/90/18 now looks small on the front of the yellow one. Too much fender gap, I should have bought a 3.50 x 18. 

[Don R]

GTMdriver, it looks like a good one, it seems like any 4-4's are hard to find.

[jag767]

Here is my 350f so far. Have to do a little more work, then she's coming back apart for paint and powdercoat. Going to be all silver. I rebuilt the engine, new everything I could get parts for, just need to finish up the new wiring harness, and am waiting for my digital multispark ignition. One I can take her around the block and am sure I like what I made, I'll get the frame blasted/powdercoated, tank painted, and make her all purdy.

[MoMo]

GTMdriver, it looks like a good one, it seems like any 4-4's are hard to find.

The devil wanted me to put the 350F  front end, tank and seat on a 400F with 400 handlebars and some color matched side covers.
 That said, the 350 deserved better, the guy that bought it wants to keep it as original as possible, even as far as using used non rusty spokes from other honda 18" wheels.
 Now I'm looking for 400 fork tubes or a front end to swap. I was told 400's have the shortest forks.

 I ordered some 750 K0 short front signal stalks for the early turn signals on the red 400, the 90/90/18 now looks small on the front of the yellow one. Too much fender gap, I should have bought a 3.50 x 18. 

Don, I replaced the spokes on the pink 400 and have a decent set left over.  Sell the set cheap...Larry