Topic: Four Stroke engine with no valves.

[Feliks]

So on your way I think, why this project Manchattan taken a Pole, who only since the outbreak of war in 1939 was in England .. After all, his English was not too good for sure .. British citizenship also quickly got something to this project could attend ... ... But I know war, accelerates various activities ... But the English did not really even war .. Therefore I am full of admiration .. as a sincere desire ..
Here in the video you can see, the then fairly good the English had ..
Each fought as best he could to make this world a better place .. Sometimes it was not easy ..

http://www.nfb.ca/film/strangest_dream

[Feliks]

In the new year, new designs ..
Air bike, designed in a similar way Hunting N.126.

http://en.wikipedia.org/wiki/Hunting_H.126






http://www.rcgroups.com/forums/showthread.php?t=1775321&page=6

http://www.hobbyking.com/hobbyking/store/__21146__Alloy_DPS_2_Series_120mm_EDF_unit_with_4_Pole_980kv_Motor_5000watt_12s_.html

http://www.bavariandemon.com/en/products/cortex/

http://www.rcgroups.com/forums/showthread.php?t=1775321&page=6

It is the lightest machine to move in the air, which is designed ..

Andrew

[Feliks]

Well, here , a movie that shows that " spoon effect" is possible to obtain a large area, no such model of the wing , set " bellies " to each other. Between the wings , air is blown using an ordinary hair dryer .. The second part of the film , you will see that blowing this way only one wing , we can feel the hand , there is some lift of the wing . Simply it is so microscopic that it can not feel , despite the fact that once we're blowing on the wing , then do not . I do not feel any difference. The reason is also that the air dryer has a very low speed, and it is relatively very little ..
However, as we hold as two wings . set ' bellies to each other, and kept at one end , the other end , a very intense vibration , bouncing off each other, as a result of blowing the hair . the film do not really see these vibrations because their speed is high , as the camera does not records so quickly. records and revealed that the image of " waving wings. " In a time while also heard the " clack " of themselves striking the wings .. so attractive force them to each other must be large, as seems the powerful sound of beats between them. wing to descend , and then diverge , and again, there are withdrawal force with each wing , and so the circle. But fairly quickly , despite the relatively large area of ??the wings in relation to a small air stream flowing between them ..
In any case , it is this force several times to each side of the Astringent greater than the lift of a single wing , which you can not even feel that there is in these conditions ..

http://youtu.be/KpIWhqW7lWA

Andrew

[Feliks]

Of course the pipe that goes through the negative pressure means can be any lengths, and generators placed On the surface of the earth .. This may be from a set of several such sets ..



Andrew

[Feliks]

Here a further explanation of why dual Red Baron can give at 100km / h about 300 mm of mercury vacuum. .. . ..
Here is a pdf of the classical venturi air, and why is it used double nozzle.

http://www.new4stroke.com/Venturitubes1937.pdf



And now, what are the parameters of the two nozzles that you can buy .. of similar size
The first nozzle gives 4 inches (101 mm Hg) of vacuum of mercury and has a length of 10 inches.

http://www.aircraftspruce.com/catalog/inpages/venturi2.php

The second nozzle gives up 9cali (228 mm Hg) of mercury vacuum, and the length is 11 1/4 inch. That is 11% plus growth in vacuum and lengths are more than 100% .. That depends on the vacuum from a very proper way to design the nozzle ..

http://www.aircraftspruce.com/catalog/inpages/venturi3.php

Similarly, the need to design a properly configured dual Windmill Red Baron to repair the effects were good.
Here you can not scoff case.
The rest will depend on the size of the system..

Andrew

[dave500]

[Feliks]

Underground sarcophagus must be the first in Fukushima.




Andrew

[Feliks]

Here, as the tunneling doing in the world, quickly and as cheaply ...



Andrew

[Feliks]

So, here is the sea, the British shows them for years, as same storms the fenced off shore .. which formed small pool ... Now the water accumulated there, you can refer back to the sea, but by the turbine, which will be make electricity .. The simplest solution ... A little more civilized, I invent .. here they are. Even with the smaller waves works .. In Scotland, the annual average wave height is 3 m .. And the car would probably put a nuclear engineers to examine how quickly the corrosive materials used in its construction .. In the video you can see that even a police officer imagines that in such a way that you can produce energy ..:rolleyes:

https://www.facebook.com/photo.php?v=817204154961489



Andrew

[Feliks]

Andrew :lol:

[Feliks]

The turbine is to be the trigger salt water back into the sea. Here some drawings that explain. You can build a special vortex, as there is a high coast. And the picture only in the world peak power pump salt water. But pump water upwards through the for feedback electrical current. I propose that the water pump teeth using sea waves-moving pumps with valves ..





Andrew

[Feliks]

To this day, I can not reconcile with the fact that the existence Such "Queen" almost no one in Poland do not know ..
And the characteristic of moving the hair at the very beginning, it reminds me a metal .. 1977 ..

https://www.facebook.com/photo.php?v=10203336790804903&set=vb.1364779026&type=2&theater
 

[Feliks]

Here the power but sweet water .. has the power of 700 MW, ie as the average nuclear reactor .. If they build the seafront, a few thousand of these pumps that could Diaphragm Pump by waves and swimmers pumped into the upper reservoir of salt water .. the difference in the levels of this  plant is only 100 meters, so the pressure of the pumped water would have to be only 10 bar ..






Andrew

[Feliks]

A big thanks AndrewF ..

Blake Hydram - How it works

Indeed as we have energy in excess, it can use it for pumping water on big height. Thanks tems Sytstem the waves of the sea may be even lower pressure designed .. Well, for example, only 2 bars .. which then drives the ram pump to a height of 125 meters, it can pump water 

http://practicalaction.org/media/preview/10504

Andrew

[Feliks]

Here we see that nuclear power plants and water are exposed to blowing up .. My idea of ??all the tanks of salt water, to build on the high coast of the sea, is very safe and resistant to the threat of terrorism .. Because if even jtos shaft blow tank, the stored water, practically this water will not do any damage, because the drain into the sea, which is near ..

http://enenews.com/bbc-ukraine-on-brink-of-civil-war-govt-threats-to-blow-up-nuclear-plants-facilities-on-high-alert-after-seizure-of-energy-ministry-official-state-of-emergency-possible-video



Now we see the picture, the upper lake with an area of ??1.2 km sqare .. gives you energy for 8 hours, 700 MW ... or 24 hours it would have to be 3.6 km sqare ..
Imagine this upper lake measuring 8 km x 8 km = 64 km sqare ..
64/3, 6 = 17 .. now 17 x 700 = 12, 000 MW ~ ..
That is more than all British nuclear plants...: P

Andrew

[Feliks]

Tsunamim from the mainland to the nuclear facilities?
You just can not build a whole country as safe as Nuclear power plant itself .. therefore will be different events ..
In my idea of fresh water tank bund height, does not have to be high, just 20 m, because the same tank now you have to build on the high bank, for example, 100 m (300 ft) course very near sea ..
 
http://enenews.com/npr-dam-operators-are-struggling-with-major-underwater-crack-tv-its-pretty-crazy-its-one-of-the-biggest-dams-in-the-state-its-going-to-be-a-catastrophe-if-something-happens-video
 
 
http://seattletimes.com/html/localnews/2023011288_apxcolumbiadamcrack.html
 
Andrew
 

[Feliks]

Posted 04 March 2014 - 22:20
Greg Locock, on 04 Mar 2014 - 22:14, said:
I think, if you live in an uninhabited country, that coastal hydro makes a lot of sense. But at least where most of us live the idea of flooding the coastal plains is a fairly drastic solution, not much different to the threats of rising sea level which may or may not turn out to be significant..
Nuclear power plant of 800 MW shall be adopted for the area of 5 x 5 km ... 64 km square So it have any 3 such power ... but here is 12000 Mw of free space for 15 nuclear power plants .. that is the difference, ie 12 will surface to be used for example to residence .. of course, the surface of the sea with swimmers will be pumping big ..
 
:wave:
 
Can someone pay me for finding 200 square km of free land in the UK? :rolleyes:

[Feliks]

Feliks, on 09 Nov 2009 - 20:55, said:
That if to fill all unused spaces up on ships with this polystyrene foam, most probably they stood unsinkable .

Thanks to the fact that it wouldn't be possible to sink them,
a lot of people so that it is possible to rescue.
And next
then to the shipyard it would be possible to tow away


Recently I noticed ,that the aircraft would be very useful by the ability to swimming
Two days ago :

BBC  http://news.bbc.co.uk/2/hi/europe/8347913.stm

tu142  http://en.wikipedia.org/wiki/Tupolev_Tu-142


If such a shortcut poliuretane foam for construction of such parameters:





Specifications specific gravity after hardening 11 - 16 ,3 kg/m3* Base polyurethane Productivity of 825 ml – 66 litres * c 100 mb of the stream about the diameter of 5 2 cm * Pyłosuchość 8 - 10 minutes * Time of processing 15 - 30 minutes * Time of hardening from 5 up to 48 h (full mechanical load capacity) * a free access of air is Necessary. One should not apply foam in rooms closed tightly. Resistance to UV rays weak in outside applications one should shelter the surface of foam from the UV radiation. Structure of cells of c 70 % smoothed, evenly closed cells thermal Resistance after hardening from – 40 ° C to + 90 ° C (short-term to + 140 ° C)


15 bottle give 1 m^3 (1000 litres) cost about 80 $ , this can swimm 1 tones

Tupolew 142 have 80 ton weight 80 x 15 = , need 1200 pieces bottles this foam .


All cost of foam 80 x 80 $= 6400 $.
Whole weight of the foam to allow the total buoyancy such an airplane is 1200 KG
It is only 1% of the total weight of the aircraft.

Wig area is 311 m^2 , 80 m^3/ 312 m^2 = 0,25 m the average amount of surface foam on the inside wings. I think that in this plane is so much unused space.

And such buoyancy of the aircraft would also be found useful for Airbus over the Atlantic, as well as the Boening over Hudson.

Regards Andrew  /Quote/


Cam beck..



If my ideas and name were not banished, supposedly in the interests of different groups, it can now this flight Malaysia Airlines Flight 370 would have ended differently .. no but tell me not to fight with the Windmills of Don Quixote .. I think you are the wiser and better knowledge of what to do .. instead of listening what to do .. I wonder if those who are on hand this banning, feel at least some share of responsibility for what happened ...

Andrew:mad:



Anyway, but now it comes to airplanes .. According to my old calculations in 1 square meter for the TU 142 to have a buoyancy should be an average of 25 cm of foam .. or on each side of the plate from inside the 12 cm ... It's such a little thicker siding ..

Andrew

[Feliks]

Originally posted by AndrewF
You are Sancho Panza AICML5

No, I'm probably more like Don Quixote fought windmills .. like me .. I guess he knew that something was wrong with them .. I only showed that the Windmill Red Baron may well serve the people .. But before all traditional windmills which Don Quixote fought disappear, probably it will be some time




Andrew

[Feliks]

Andrew,

I subscribe to this thread and have always enjoyed your posts, so keep them going.

Regarding the use of foam to prevent aircraft from sinking when lost at sea, I don’t have the statistics, but anecdotally, I assume that most deaths are not due to drowning, but due to impact, or other high energy violent endings.  I believe the scenarios you are discussing likely have adequate solutions in place (life rafts, etc.).

I think an excellent area for the use of that type of foam would be in help reduce the death toll for passenger and roll on/off ferry accidents.  These seem to happen in rough seas, or in overcrowding conditions with sometimes large loss of life.

http://en.wikipedia.org/wiki/List_of_maritime_disasters

Richard

Thank you very much Richard for a good link and my subscriptions. I Normally you need only the broad outlines of the new ideas I present .. they require much development, by many people .. then they really for us is profitable ..
Such inspirational posts like yours, Richard causes that describes more about the innovation ..

Here I would like to say that the majority of pilots for emergency landing was going to make sure you water, if she was sure that the plane did not sink .. The waters, even on land is not much, for example, a lake or river. This launch is a big advantage. There is minimal risk of fire aircraft .. The most spectacular example is the "Miracle on the Hudson"
Here you can see how little is needed to plane could swim ..

http://en.wikipedia.org/wiki/US_Airways_Flight_1549



http://edition.cnn.com/2014/03/13/world/aviation-mysteries/index.html?hpt=hp_c2

Andrew:D

[Feliks]

The plane actually has a tower of different things. plumbing, electrical .. But still has Most sending of empty unused space. . Of course you have to think 10 times, where we can insert each of 1 decimeter foam. Part needs to be done easily removable, in plastic bags or specially shaped profiles, that can be had for service to remove and after the back insert. It's a plane, one of the most complicated machines .. in addition with the high standards of reliability .. so it will not be pumping air into the inner tube ..
 
Andrew

[Feliks]

Well in my engine variable compression ratio is feasible only for a single device in all cylinders ..
But maybe for the help of such a device could still improve valve timing ?

https://www.youtube.com/watch?feature=player_embedded&v=qZrUl1gszVc


Andrew

[Feliks]

Talk with plenty of foam.

http://forums.vwvortex.com/showthread.php?3386395-Half-rotate-engine/page30

Andrew

[Feliks]

Greetings to all from the Engine Expo 2014 in Novi Detroit ....








I'm worried, because you will be some news about this new engine somehow obtain. As I wrote above, only 25% of the engines messages may come in handy .. The rest 75% you have to re-learn ..

Here are the materials you can download a PDF of the conference .. I am at the end of the first day, as it was in the schedule

http://www.ukintpress-conferences.com/conf/14exna_conf/index.php

http://www.ukintpress-conferences.com/conf/14exna_conf/download.php?conf_id=152&sess_id=1983&view=drill

Andrew

[Retro Rocket]

Thanks Andrew, very interesting...