« previous next »
Pages: [1]   Go Down

Author Topic: Yamiya stuff, only cheaper  (Read 2247 times)

0 Members and 2 Guests are viewing this topic.

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Yamiya stuff, only cheaper
« on: December 09, 2014, 01:05:20 PM »
I've posted this before but I can't find the relevant thread. Someone was talking about how now is a good time to get stuff from yamiya because of the dollar value. I ordered a lot of NOS stuff for my K2 build via jtmarks77 on ebay, but via direct invoicing. He's a good seller and will get you yamiya stuff for cheaper. I never asked but he probably is a local distributor for them.

My most recent example, I just ordered an unpainted gas tank, gas tank cap, petcock, petcock mounting screws and a set of advancer springs. Yamiya total with shipping came out to 593. Same stuff via JT came out to 551 insured shipped priority, includes paypal overhead as well. I don't recall the exact numbers but the discount was significantly better with larger items like the body kit and such.

If anyone is looking to get stuff from yamiya and wants to save a few extra $$, I'd recommend getting in touch with JT directly. PM me and I'll give you his email. He's good about giving you exact pricing and shipping, I always get the pricing from him before requesting an invoice.
Logged

Offline cabrala

  • Super Duper
  • Hot Shot
  • ***
  • Posts: 540
Re: Yamiya stuff, only cheaper
« Reply #1 on: December 09, 2014, 01:14:58 PM »
+1 on JT
Logged
-Alex

'75 CB750F
'77 CB550K
'78 CB550
'93 FZR600

Need a better, newer points cover gasket? How about rubber washers for the headlight bucket? Click the link below:
http://forums.sohc4.net/index.php?topic=122308.0

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Yamiya stuff, only cheaper
« Reply #2 on: December 09, 2014, 02:22:55 PM »
Just for the mods: I didn't start this as a seller feedback thread, just info on getting yamiya stuff cheaper.
Logged

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: Yamiya stuff, only cheaper
« Reply #3 on: December 09, 2014, 03:39:37 PM »
Quote from: edwardmorris on December 09, 2014, 02:22:55 PM
Just for the mods: I didn't start this as a seller feedback thread, just info on getting yamiya stuff cheaper.

too late...    :D   I buy stuff from JT Marks all the time...
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,839
  • Saver of unloved motorcycles.
Re: Yamiya stuff, only cheaper
« Reply #4 on: December 09, 2014, 09:18:32 PM »
He wasn't interested in getting me a full exhaust system but will get the other parts. Is there another way to contact him?
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Yamiya stuff, only cheaper
« Reply #5 on: December 10, 2014, 10:03:30 AM »
Quote from: Don R on December 09, 2014, 09:18:32 PM
He wasn't interested in getting me a full exhaust system but will get the other parts. Is there another way to contact him?
Email is the best way. I can PM it to you.
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,839
  • Saver of unloved motorcycles.
Re: Yamiya stuff, only cheaper
« Reply #6 on: December 10, 2014, 10:48:47 PM »
That would be good Edward thanks, I can't see the message icon but it's there if I scroll around a little.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Yamiya stuff, only cheaper
« Reply #7 on: December 11, 2014, 08:09:58 AM »
Quote from: Don R on December 10, 2014, 10:48:47 PM
That would be good Edward thanks, I can't see the message icon but it's there if I scroll around a little.
Sent, and np.
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,545
  • Bike almost back to the 70's 2015
Re: Yamiya stuff, only cheaper
« Reply #8 on: December 19, 2014, 10:22:51 AM »
I bought a complete NOS TEC point plate from jtmarks77. Good shipment too.
Some sellers have too high shipping cost making it impossible to order
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Yamiya stuff, only cheaper
« Reply #9 on: December 19, 2014, 11:25:27 AM »
Quote from: PeWe on December 19, 2014, 10:22:51 AM
I bought a complete NOS TEC point plate from jtmarks77. Good shipment too.
Some sellers have too high shipping cost making it impossible to order
Did you get it via his ebay store? Stuff is even less when you get it from him directly.
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,839
  • Saver of unloved motorcycles.
Re: Yamiya stuff, only cheaper
« Reply #10 on: December 19, 2014, 09:47:43 PM »
 I have K0 heat shields, screws, washers and mirrors on the way from him. The last parts I needed for a stock exhaust system. After owning five 750's this will be my first with stock exhaust. Even when guys didn't want a 4 into 1 the stockers rusted and they ended up with one anyway. I'm getting kind of excited.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,545
  • Bike almost back to the 70's 2015
Re: Yamiya stuff, only cheaper
« Reply #11 on: December 19, 2014, 11:52:36 PM »
Quote from: edwardmorris on December 19, 2014, 11:25:27 AM
Quote from: PeWe on December 19, 2014, 10:22:51 AM
I bought a complete NOS TEC point plate from jtmarks77. Good shipment too.
Some sellers have too high shipping cost making it impossible to order
Did you get it via his ebay store? Stuff is even less when you get it from him directly.
Yes, eBay store. But I found 2 different part numbers same stuff för different money.
http://www.ebay.com/itm/Honda-NOS-CB750-750-K0-K1-K2-K3-K4-K5-76-77-Point-Plate-30200-300-154-/321299109557

This cost more
http://www.ebay.com/itm/Honda-NOS-CB750-750-CB500-500-CB550-550-Point-Plate-30200-323-154-/331247276732
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: Yamiya stuff, only cheaper
« Reply #12 on: December 20, 2014, 12:44:36 AM »
Quote from: PeWe on December 19, 2014, 10:22:51 AM
I bought a complete NOS TEC point plate from jtmarks77. Good shipment too.
Some sellers have too high shipping cost making it impossible to order

Ebay has finally dunned shipping costs for those that were abusive about that. Now all can enjoy increased costs and profit for the e-bay.
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,839
  • Saver of unloved motorcycles.
Re: Yamiya stuff, only cheaper
« Reply #13 on: December 22, 2014, 09:01:13 PM »
 I got my stuff, it's as expected and delivered on time.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Yamiya stuff, only cheaper
« Reply #14 on: December 22, 2014, 09:43:12 PM »
Cool. Try him directly next time for even better pricing.
Logged
Pages: [1]   Go Up
« previous next »