Author Topic: carb accelerator nozzle broken!  (Read 391 times)

0 Members and 1 Guest are viewing this topic.

Offline ajduke5

  • Full Member
  • *
  • Posts: 4
carb accelerator nozzle broken!
« on: December 11, 2014, 11:12:12 AM »
Hi. I brought an f2 carb on ebay and found when they sprayed it they covered the accelerator nozzles in the carb bodies. Ie no fuel will pass into the air flow.
I removed one but it was so stuck it is now it two.
Does anyone know where I can get replacements as I'm at a wall. Looked everywhere. Thanks in advance.

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: carb accelerator nozzle broken!
« Reply #1 on: December 11, 2014, 11:32:46 AM »
buy another (better) set of carbs
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mineā€¦"