Author Topic: A big Thanks To calj737 (Read 2762 times)

springer · « **on:** January 10, 2015, 03:40:49 PM »

A big Thanks to cal he took time to help me pull my engine off my 550. he stop by my house thurday night on his way back home wood buring hot and I did my best to help him, I pull some parts before he got there. he said I'm for the South, I told him it was cold here but he calls it a arctic blast well that's what the news said to. but really I'm Thankful for all he did for me. but was told I can not give away any trade secret I said ok done. Jim

ekpent · « **Reply #1 on:** January 10, 2015, 03:59:58 PM »

Good job Cal, that was very nice of you, now about those trade secrets

Sounds like your getting around and about pretty well Springer, that's good news also. Eric

dusterdude · « **Reply #2 on:** January 10, 2015, 05:12:05 PM »

Cal is good people

Stev-o · « **Reply #3 on:** January 10, 2015, 05:24:42 PM »

Cal is a great guy, he has also helped me out. I plan to repay with beer & BBQ one day.

Hope his head is not getting too big....ha!

springer · « **Reply #4 on:** January 10, 2015, 09:23:16 PM »

cal said it would take 2 hour to take the motor out, Well that didn't go as planed one bolt and a hour or so later it was out. he did all the work so when it come time to put the motor in the other bike I'm in trouble I didn't watch to much. it was great to meet you as well cal and see someone pm me about them secret you showed me. I cant remember if it was ekpent or some other name I couldn't say. I should stop talking good about him his head going to pop. Jim

FunJimmy · « **Reply #5 on:** January 10, 2015, 10:00:38 PM »

You meet the nicest people on a Honda.
Great story

Retro Rocket · « **Reply #6 on:** January 10, 2015, 11:32:04 PM »

Quote from: dusterdude on January 10, 2015, 05:12:05 PM

Cal is good people

I'll second that....

ekpent · « **Reply #7 on:** January 11, 2015, 06:54:46 AM »

No PM here Springer because Cal pretty much lays out all the trade secrets very well in his responses to the folks problems.

springer · « **Reply #8 on:** January 11, 2015, 07:19:04 AM »

These are secret you guys dont know about that's what cal told me.Jim

faux fiddy · « **Reply #9 on:** January 11, 2015, 02:19:18 PM »

Quote from: springer on January 10, 2015, 09:23:16 PM

Well that didn't go as planed one bolt and a hour or so later it was out.

Some take hours at a time for months. You can hear the difference of the sound of beating a stuck bolt and one that is moving.

Retro Rocket · « **Reply #10 on:** January 11, 2015, 03:15:32 PM »

Quote from: springer on January 11, 2015, 07:19:04 AM

These are secret you guys dont know about that's what cal told me.Jim

You telling fibs again Cal....

Retro Rocket · « **Reply #11 on:** January 11, 2015, 03:53:37 PM »

Quote from: calj737 on January 11, 2015, 03:50:45 PM

Quote from: Retro Rocket on January 11, 2015, 03:15:32 PM
Quote from: springer on January 11, 2015, 07:19:04 AM
These are secret you guys dont know about that's what cal told me.Jim

You telling fibs again Cal....
I have no clue what he's referring to? I think he's confusing when I told him, "Keep my visit a secret, I don't want a bunch of blokes thinking I make house calls". You can see how that worked out

springer · « **Reply #12 on:** January 11, 2015, 04:52:42 PM »

I think he's confusing when I told him, "Keep my visit a secret, I don't want a bunch of blokes thinking I make house calls". You can see how that worked out
------------------------------------------------------------------------------------------
OOPS That is what you said sorry!! it will happen again

Jim

P.abrera · « **Reply #13 on:** January 11, 2015, 05:50:16 PM »

Cal's the man

good to hear you're keeping busy

Sent from my iPhone using Tapatalk

ekpent · « **Reply #14 on:** January 12, 2015, 05:17:49 AM »

Hopefully you can swing into Kalamazoo from Detroit Cal, I will lock you in the shop for a week or so with a to do list on the workbench and slide a little food and refreshments under the door a couple times a day

springer · « **Reply #15 on:** January 12, 2015, 07:38:49 AM »

Wow i need to make a to do list for cal and my shop was a little messy, and I'm not saying It's the leg it was the sister.the place I'm working out of is her's and the tools were here and there but and no pb just wd40 wont happen again I'll be ready

edwardmorris · « **Reply #16 on:** January 12, 2015, 02:21:31 PM »

Quote from: calj737 on January 12, 2015, 05:46:48 AM

Quote from: ekpent on January 12, 2015, 05:17:49 AM
Hopefully you can swing into Kalamazoo from Detroit Cal, I will lock you in the shop for a week or so with a to do list on the workbench and slide a little food and refreshments under the door a couple times a day
What day is good for you? Skip the food, just coffee and nicotine please. Do I need to bring tools, or is your shop well-equipped and organized?

I ain't too far from MI, how about you stop by my place first and we button up my K2 motor

Stev-o · « **Reply #17 on:** January 12, 2015, 03:59:41 PM »

Hey Cal......can you put me on that list? I'll get you the best BBQ IN THE state, need to get this H1 motor rebuilt. Shouldn't take us but a day or two, no pesky cams or valves to mess with.

Plus, when we are done, we can head over to The Yellow Rose, I know the owners....

http://www.yellowroseaustin.com/about-the-yellow-rose/

springer · « **Reply #18 on:** January 12, 2015, 04:34:55 PM »

I think cal told me he could only help one member a year, and it was me

so you guys have to wait Jim

springer · « **Reply #19 on:** January 12, 2015, 04:45:01 PM »

Holy Toledo you are not doing all that right now Jim

edwardmorris · « **Reply #20 on:** January 13, 2015, 08:25:14 AM »

Holy crap I made the list! Time to straighten out the shop space

News:

Author Topic: A big Thanks To calj737 (Read 2762 times)