Author Topic: GV1390's Trattoria "Racer" V2! (Read 72899 times)

GV1390 · « **Reply #275 on:** August 08, 2016, 11:09:39 PM »

You knew I was working on it tonight....

With that being said, I rode her down the street! Work at 6am so I'm reserving this spot for my correct geometry post.

GV1390 · « **Reply #276 on:** August 09, 2016, 04:18:51 AM »

UPDATE:

In regards to geometry; the ground was measured to ensure it was flat. A magnetic angle gauge was used to measure neck angle, then fork length was measured, triple offset was measured and also front tire diameter resulting in 3.93 trail. Pretty darn close considering stock is 4.1 =) This (as suspected) will make the turn in more "nimble" hence why a damper was suggested. Math doesn't lie.

I also got the chance to ride this thing, finally! Everything charges as well but still has some areas that need buttoning up. One more solid days worth and she will be ready to go on the road!

sinister902 · « **Reply #277 on:** August 09, 2016, 05:17:01 AM »

very late, very poor quality video of GV taking it out to the street last night.

GV1390 · « **Reply #278 on:** August 11, 2016, 04:24:48 AM »

Does anyone else on here run a Cognito Moto triple?

Reason I ask; there is no room in the stem length to fit a dust cover on the top bearing. I installed a factory dust cover but then there are not enough threads to spin on the top triple main nut. It currently works how it should but I still rather have some sort of cover protecting my bearings even though its a pretty snug clearance under the top triple.

slikwilli420 · « **Reply #279 on:** August 11, 2016, 06:45:44 AM »

Quote from: GV1390 on August 11, 2016, 04:24:48 AM

Does anyone else on here run a Cognito Moto triple?

Reason I ask; there is no room in the stem length to fit a dust cover on the top bearing. I installed a factory dust cover but then there are not enough threads to spin on the top triple main nut. It currently works how it should but I still rather have some sort of cover protecting my bearings even though its a pretty snug clearance under the top triple.

I back bored my custom top tree so there was a very small gap and it was able to go down over the steering neck instead of using a dust seal. I suppose stuff can still sneak in there but I don't ride on a lot of dirt roads.

rusty2078 · « **Reply #280 on:** August 11, 2016, 09:19:14 AM »

Sorry if I missed it, GV, but what do you have for a swingarm?

SOHC4 Cafe Racer Fan · « **Reply #281 on:** August 11, 2016, 10:57:11 AM »

We all knew it was coming. I just punched the ticket. You've been nominated for BOTM. Assuming it is seconded, we will have a nice battle of the cafes (including the Upstate NY guys) for September 2016 BOTM.

GV1390 · « **Reply #282 on:** August 11, 2016, 10:59:04 AM »

Quote from: CB750 Cafe Racer Fan on August 11, 2016, 10:57:11 AM

We all knew it was coming. I just punched the ticket. You've been nominated for BOTM. Assuming it is seconded, we will have a nice battle of the cafes (including the Upstate NY guys) for September 2016 BOTM.

Thanks for the nomination Don, means a lot.

Can I still run for BOTM if my emblems aren't painted? I've been stuck on this dilemma for a bit of time now.

:sigh:

GV1390 · « **Reply #283 on:** August 12, 2016, 04:14:08 AM »

Bump...

Some teaser pictures for now:

Got mostly everything done....have to order some new jets to swap in and also paint my tank emblems once I decide on what color to do. Pretty stoked though!

FunJimmy · « **Reply #284 on:** August 12, 2016, 07:09:46 AM »

Quote from: GV1390 on August 12, 2016, 04:14:08 AM

Lookin great GV. Lovin the waistline.

GV1390 · « **Reply #285 on:** August 12, 2016, 07:43:14 AM »

Quote from: FunJimmy on August 12, 2016, 07:09:46 AM

Quote from: GV1390 on August 12, 2016, 04:14:08 AM

Lookin great GV. Lovin the waistline.

thanks man!

GV1390 · « **Reply #286 on:** August 14, 2016, 08:46:52 PM »

Crazy to think this build started in this form:

Anyway; some updated pics:

Untitled by Ian Kley, on Flickr

GV1390 · « **Reply #287 on:** August 18, 2016, 04:22:01 AM »

Rookster · « **Reply #288 on:** August 18, 2016, 01:51:20 PM »

Fantastic pics.! I love the background out by the Skyway. The bike looks great too.

Scott

scottly · « **Reply #289 on:** August 18, 2016, 06:53:15 PM »

Quote from: GV1390 on August 11, 2016, 04:24:48 AM

there is no room in the stem length to fit a dust cover on the top bearing. I installed a factory dust cover but then there are not enough threads to spin on the top triple main nut.

Read this thread:
http://forums.sohc4.net/index.php/topic,160128.0.html#lastPost

GV1390 · « **Reply #290 on:** August 21, 2016, 01:59:18 PM »

Quote from: Rookster on August 18, 2016, 01:51:20 PM

Fantastic pics.! I love the background out by the Skyway. The bike looks great too.

Scott

Thank you! Haven't been able to stay off this thing since, it's a blast.

Will you be attending DGR Rochester this year?

GV1390 · « **Reply #291 on:** August 21, 2016, 01:59:56 PM »

Quote from: scottly on August 18, 2016, 06:53:15 PM

Quote from: GV1390 on August 11, 2016, 04:24:48 AM
there is no room in the stem length to fit a dust cover on the top bearing. I installed a factory dust cover but then there are not enough threads to spin on the top triple main nut.
Read this thread:
http://forums.sohc4.net/index.php/topic,160128.0.html#lastPost

I'll take a gander when I get a moment, thank you for the link.

GV1390 · « **Reply #292 on:** August 22, 2016, 05:51:32 AM »

Bump.

On Thursday I finished up tinkering with a few things and prepared for my first real "shake down" run.... so the following day a few of us packed up and headed up to Toronto for Mods N' Rockers. We got stuck in heavy traffic at the border so we pushed the bikes from US soil over to CA, it was also hot as balls out. For being a fresh build, I can't complain considering I made it there and back without a hiccup! Not a single break down!

Of course there are things that need to be done still like; balance my tires, change my oil and install tank emblems. The show was great, had the pleasure of networking with some really awesome people. On top of that, I won a trophy for Best Custom Cycle of the show! Not bad considering there were 200-300 bikes there and a handful of trophies.

Few quick pictures:

@Sinister902 had a good time Friday:

Couple pictures Nick took at the end of the event:

SOHC4 Cafe Racer Fan · « **Reply #293 on:** August 22, 2016, 08:27:12 AM »

You needed a little make up to take away that sweat shine!

I wanted to like that 650 but the extended length of the swingarm ruined it for me.

GV1390 · « **Reply #294 on:** August 22, 2016, 08:30:03 AM »

The sweat.....oof, let me tell you - it was rough out there lol.

I completely agree. The single sided swing arm was neat to see on these bikes though. Granted you're used to massive meets but, I've never seen such a big meet, with the exception of DGR Rochester last year. Toronto really has an awesome motorcycle "scene".

540nova · « **Reply #295 on:** August 22, 2016, 08:46:06 AM »

Very cool, congrats on your trophy, that should make you proud. But I've never seen a trophy like that!

1974 CB450, 2006 CBR1000RR

GV1390 · « **Reply #296 on:** August 22, 2016, 08:50:38 AM »

Quote from: 540nova on August 22, 2016, 08:46:06 AM

Very cool, congrats on your trophy, that should make you proud. But I've never seen a trophy like that!

1974 CB450, 2006 CBR1000RR

Thank you! Ya, I'm super stoked! haha. Trophy was hand made, there were a few others for different categories that were all different.

Rookster · « **Reply #297 on:** August 22, 2016, 09:16:04 AM »

Quote

Will you be attending DGR Rochester this year?

I signed up for the Niagara Falls ride. It all depends if my kids have soccer games that day. It is a shame there aren't more vintage bike events in this area. All I ever see are Harleys and sportbikes. Maybe I will switch to the Rochester ride it seems a lot bigger than the Niagara Falls ride.

Scott

GV1390 · « **Reply #298 on:** August 22, 2016, 09:41:47 AM »

Quote from: Rookster on August 22, 2016, 09:16:04 AM

Quote
Will you be attending DGR Rochester this year?

I signed up for the Niagara Falls ride. It all depends if my kids have soccer games that day. It is a shame there aren't more vintage bike events in this area. All I ever see are Harleys and sportbikes. Maybe I will switch to the Rochester ride it seems a lot bigger than the Niagara Falls ride.

Scott

I agree! Rochester had far more people over NF last year. Going to Toronto is really a tease with how awesome they have it in regards to vintage motorcycles as well as lifestyle. Let me know if you sign up for Rochester, we can ride up together if you'd like.

Ericcb750 · « **Reply #299 on:** August 22, 2016, 12:16:54 PM »

That bikes is sweet, I like the Right side GSXR Brake. Super stoked to get mine from Devin....Got some beautiful forks, calipers, and Galfer Wave rotors from Don (CB750 Cafe Racer). Just waiting on my trees, wheel, etc. Thank thing must handle like a dream now.

News:

Author Topic: GV1390's Trattoria "Racer" V2! (Read 72899 times)