« previous next »
Pages: [1]   Go Down

Author Topic: any way to test for big bore  (Read 1057 times)

0 Members and 1 Guest are viewing this topic.

Offline Milunchbox12

  • Full Member
  • *
  • Posts: 24
any way to test for big bore
« on: January 19, 2015, 08:35:46 PM »
Owner says its got a big bore, is there any way to know with out pulling head?
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 20,193
  • Saver of unloved motorcycles.
Re: any way to test for big bore
« Reply #1 on: January 19, 2015, 09:01:33 PM »
Been there, At one time I think they all were 836. If you know the piston tops apart you can peek into the plug hole with a borescope or a tiny light. I had one that was an 836, 900 or 936 depending on how many beers the guy had. After I got it I took it apart for gaskets and it was stone stock. It's an 836 now. really. no kidding.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: any way to test for big bore
« Reply #2 on: January 19, 2015, 10:57:09 PM »
I bought a 900 that was really an 836...
 Stick a small light in the plug hole or a borescope.  You can usually see if it has a high dome, big valve cutouts, or bigger squishband. ...plus you could cc it..
 Its a used motor, pay accordingly.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,603
  • Gusto mo titi ko?
    • project
Re: any way to test for big bore
« Reply #3 on: January 20, 2015, 04:10:28 PM »
most all i see listed for sale have an 836  :D
Logged
Pages: [1]   Go Up
« previous next »