Author Topic: Drag Guys, help me ID these parts....  (Read 4518 times)

0 Members and 2 Guests are viewing this topic.

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Drag Guys, help me ID these parts....
« on: January 27, 2015, 09:47:16 AM »
Years ago I bought out an old back in the day drag racer who ran a big bore (1000cc) cb750. Recently I was digging through some of the old stuff and found some things I really don't know that much about. so here they are...


1) Mukuni carbs. As near as I can tell the PO had these setup individually, not racked, on a cb750 engine with a K0 throttle cable. They are even numbered as to what cylinders they feed. All I can tell is that they are mukuni smoothbores. What can you guys tell me?:



















2) are these strut bars. I've never seen anything like them and they are setup for wheelie bar mounts. All aluminum, hollow but not cast - looks to be machined billet. Probably home made but wanted to make sure they weren't CirCycle or anything like that (the circycle ones I have seen are all flat stock):













so...thoughts?

Maintenance Matters Most

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,101
  • CB750F Dragbike
Re: Drag Guys, help me ID these parts....
« Reply #1 on: January 27, 2015, 10:16:40 AM »
Those look like Mikuni VM roundslide carbs to me. I had a set on my KZ1000 dragbike. Worked great. You can likely find some details on the carbs at this link. http://www.mikuni.com/pdf/vmmanual.pdf

Offline BPellerine

  • Master
  • *****
  • Posts: 2,222
Re: Drag Guys, help me ID these parts....
« Reply #2 on: January 27, 2015, 10:41:07 AM »
unless someone spent a lot of time on them the struts look factory.bill
1978 CB 750K ard and webers
another anfob

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Drag Guys, help me ID these parts....
« Reply #3 on: January 27, 2015, 12:11:12 PM »
How big are the carbs? Are they being sold?
  I am actually. Looking for a pair for 350 2win......... Depending on price, .and if someone wants other half.
 Or I use a half set off a KO.....
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: Drag Guys, help me ID these parts....
« Reply #4 on: January 27, 2015, 12:12:00 PM »
unless someone spent a lot of time on them the struts look factory.bill

That was my thinking, there is so much work into it for a home made part. I have the wheelie bars too for the struts and they were all spherical rod ends and chromed tubes so someone spent a lot of time on making those as well.
Maintenance Matters Most

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: Drag Guys, help me ID these parts....
« Reply #5 on: January 27, 2015, 12:24:06 PM »
How big are the carbs? Are they being sold?
  I am actually. Looking for a pair for 350 2win......... Depending on price, .and if someone wants other half.
 Or I use a half set off a KO.....

Inlet Side Inside Diameter is 30mm.

Considering selling them but need to know what they are first. If you want to make an offer PM me.
Maintenance Matters Most

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,101
  • CB750F Dragbike
Re: Drag Guys, help me ID these parts....
« Reply #6 on: January 27, 2015, 12:47:23 PM »
How big are the carbs? Are they being sold?
  I am actually. Looking for a pair for 350 2win......... Depending on price, .and if someone wants other half.
 Or I use a half set off a KO.....

Inlet Side Inside Diameter is 30mm.

Considering selling them but need to know what they are first. If you want to make an offer PM me.


You beat me to it Frank. Lol. I would have used the full set on a SOHC.

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: Drag Guys, help me ID these parts....
« Reply #7 on: January 27, 2015, 12:52:32 PM »
How big are the carbs? Are they being sold?
  I am actually. Looking for a pair for 350 2win......... Depending on price, .and if someone wants other half.
 Or I use a half set off a KO.....

Inlet Side Inside Diameter is 30mm.

Considering selling them but need to know what they are first. If you want to make an offer PM me.


You beat me to it Frank. Lol. I would have used the full set on a SOHC.


Nobody has dibs. you want them pm me. I'd much rather not split them up and would like to see them back on a cb750.
Maintenance Matters Most

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: Drag Guys, help me ID these parts....
« Reply #8 on: January 27, 2015, 11:31:22 PM »
So, anybody have any ideas about the origin of these strut bars?
Maintenance Matters Most

Offline POPS 911

  • Expert
  • ****
  • Posts: 926
Re: Drag Guys, help me ID these parts....
« Reply #9 on: January 28, 2015, 08:06:36 AM »
$300 FOR CARBS................. 30MM?

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: Drag Guys, help me ID these parts....
« Reply #10 on: January 28, 2015, 09:17:59 AM »
Let's not turn this into a for sale thread. If you want the carbs, send me a private message and we can negotiate.
Maintenance Matters Most

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Drag Guys, help me ID these parts....
« Reply #11 on: January 28, 2015, 10:08:32 AM »
Let dragracer have them...
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline NalleyRacing

  • Hot Shot
  • ***
  • Posts: 497
  • 1972 Cb750K dragbike Instagram: Drag_racer736
Re: Drag Guys, help me ID these parts....
« Reply #12 on: January 28, 2015, 11:52:31 AM »
Let dragracer have them...

Yeah Frankie could probably make some magic with those!

Offline POPS 911

  • Expert
  • ****
  • Posts: 926
Re: Drag Guys, help me ID these parts....
« Reply #13 on: January 31, 2015, 06:17:09 AM »
Try to find a 4-1 throttle cable that fits these round slides, maybe PAUL GAST could make a one only set ??????

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: Drag Guys, help me ID these parts....
« Reply #14 on: January 31, 2015, 10:18:48 AM »
I think the PO used a k0 cable. Not sure100 %. However you don't need a 4-1 cable because you can use the more common 2-1 cable and a dual pull throttle.
Maintenance Matters Most

Offline POPS 911

  • Expert
  • ****
  • Posts: 926
Re: Drag Guys, help me ID these parts....
« Reply #15 on: February 03, 2015, 06:04:29 AM »
4-1 cable on e-bay for the old 750 carbs 1969?             $1000 would be a fair price........... for these 30mm carbs and bought many sets of carbs that cost more.

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,536
  • Bike almost back to the 70's 2015
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline POPS 911

  • Expert
  • ****
  • Posts: 926
Re: Drag Guys, help me ID these parts....
« Reply #17 on: February 05, 2015, 07:55:38 AM »
Point well taken PeWe:   Buy 4 new on ebay for $80 each and a 4-1 cable on ebay for $30 for a 30mm set up round slides [ total cost $350 plus shipping ] better than a used set of 29's in a bank for $700-$1100.  You would get easier mounting and 1 mm more go flow !!!!!

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: Drag Guys, help me ID these parts....
« Reply #18 on: February 05, 2015, 11:20:13 AM »
who said anything about $1000? where these numbers come from? crazy....
Maintenance Matters Most

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,763
Re: Drag Guys, help me ID these parts....
« Reply #19 on: February 05, 2015, 12:42:03 PM »
Whats the word on those cheap Mikuni carbs?
I remember some talking about most being knock offs from china.

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,101
  • CB750F Dragbike
Re: Drag Guys, help me ID these parts....
« Reply #20 on: February 05, 2015, 12:49:06 PM »
Whats the word on those cheap Mikuni carbs?
I remember some talking about most being knock offs from china.

Jaguar, I'm pretty sure the ones our member has for sale are the real deal. Someone make him a realistic offer and you'll have a good set of carbs.

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,763
Re: Drag Guys, help me ID these parts....
« Reply #21 on: February 05, 2015, 03:51:54 PM »
I'm not talking about Geeto's carbs.
I have had those in my hands and know what they are.

Was talking about some of the sub $100 carbs that show up on ebay.
I know that some of the mini bike guys had issues with them not actually being mikuni.

Don't mean to derail this thread, more of just something to talk about.

Offline POPS 911

  • Expert
  • ****
  • Posts: 926
Re: Drag Guys, help me ID these parts....
« Reply #22 on: February 09, 2015, 07:30:57 AM »
BAD Carbs from CHINA :   Maybe WALLMART could sell these look like [ KNOCK OFFS ] MIKUNI 30MM carbs as the TV, COMPUTERS, PRINTERS, PHONES , COFFEE MAKER in my home all comes from CHINA.  Bet this : Go to WALLMARTS and try to find one thing MADE IN JAPAN for sale ?????  My son is working in CHINA and I will have him look these carbs over at the MANY cycle parts stores in SHANGHI and send me a set of 4 to try out , he is a wrench spinner for 40 years and owns 26 MOTORCYCLES.

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: Drag Guys, help me ID these parts....
« Reply #23 on: February 09, 2015, 08:12:11 PM »
Pops, I think Jaguar's point is that they are counterfeit unlicensed knockoffs that are made in China, and that they don't meet mukuni's quality standards.

Yes there are good parts and bad parts made in China, and a large amount of manufacturing for the work market is done there, but if I buy a mukuni carb made in China, I at least want it to be an actual licensed and monitored product.

All this is moot because my mukunis are made in Japan.
Maintenance Matters Most