« previous next »
Pages: [1]   Go Down

Author Topic: Are there any quick release fastener options for side covers?  (Read 627 times)

0 Members and 1 Guest are viewing this topic.

Offline Juan1

  • Enthusiast
  • **
  • Posts: 119
Are there any quick release fastener options for side covers?
« on: January 31, 2015, 05:32:12 PM »
Are there any quick release fasteners I can put on my side covers so I can have easy access to the fuse box and dipstick?   
Logged

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Are there any quick release fastener options for side covers?
« Reply #1 on: January 31, 2015, 06:07:44 PM »
If they are tight, which is common. You can grease the tabs and o rings which make them much easier to remove. If you have some of the aftermarket that screw on you could get a different fastener.
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,810
Re: Are there any quick release fastener options for side covers?
« Reply #2 on: February 01, 2015, 10:05:14 AM »
Lubricate...........Yes...........but a petroleum-based grease or oil will eventually shrink the grommets and cause the side-covers to 'fly' away >:( >:( >:(

A little graphite may be better. :) :) :)
Logged
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,925
  • Bought her new 4/75
Re: Are there any quick release fastener options for side covers?
« Reply #3 on: February 01, 2015, 12:18:49 PM »
Order some new rubber grommets too. Makes a big difference and won't cost you much.
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline RevDoc

  • Hot Shot
  • ***
  • Posts: 556
Re: Are there any quick release fastener options for side covers?
« Reply #4 on: February 01, 2015, 02:51:48 PM »
As Old Scrambler is right on the mark! Having dealt with many o-rings and rubber gaskets in my years doing industrial elec. work I found that a silicone type lube is best. If you have access to Lowes's or Home Depot type DIY stores they usually stock them.
Logged
Dana

'78 CB550K--Angie
'82 CB750 Custom--Eva



As soon as you straddle a bike expect every other driver on the road to suddenly start competeing for the title "Dumbestsonofa#$%*inallNorthAmerica!!"
Pages: [1]   Go Up
« previous next »