Do you have a link to the bars? Not sure how low they are. But the following info might help from this thread... Scroll down to Dream750 reply...
http://forums.sohc4.net/index.php?topic=130526.msg1462069#msg1462069>>>
The 750 K1/K2 factory euro bars are the real deal, PN: 53100-300-610 and they have been discontinued. I have used those repop DSS bars PN: 53100-300-610P in the past and found them to be identical to my original 750 K1/K2 euro bars. If it’s important to you, they have the correct dimensions, knurls, switch pin holes and wiring cutouts that the cheap copies are usually missing. These are their dimensions:
Width: 29.50” or 748 mm
Center: 4.90” or 125 mm
Rise: 2.99” or 76 mm
Pullback: 3.81” or 97 mm
If you are fussy about a factory correct fit and look, these are the 750 K1/K2 euro bar part numbers that Honda used as they are shorter than their USA K1/K2 counterparts using stock bars:
-Clutch cable (22870-341-610) superseded to: 22870-426-610
-Throttle cable “A” 17910-341-611
-Throttle cable “B” 17920-341-611
-Brake hose “B” (45126-300-611) superseded to: 45126-300-612
* These part numbers are not found in the American Honda parts system, I purchased mine from DSS (UK)
* The upper brake hose “B” is longer available and will have to be located or made, the total length needed is 12-1/2”
