« previous next »
Pages: [1]   Go Down

Author Topic: 1978 CB750K oiltank mount rubber  (Read 975 times)

0 Members and 1 Guest are viewing this topic.

Offline SKTP

  • Master
  • *****
  • Posts: 1,791
1978 CB750K oiltank mount rubber
« on: March 09, 2015, 10:16:32 AM »
So it would appear that the rubber is available (and the weird metal threaded parts). I want to repaint my oil tank...

So the question is; How to these come apart? I want to remove the rubber for paint






Logged
1978k rebuild thread http://forums.sohc4.net/index.php?topic=68423.0
BIKE OF THE MONTH - OCTOBER 2017
2003 Ducati M800ie
1997 Honda CR-V
2004 Honda CR-V
1966 Honda S90

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: 1978 CB750K oiltank mount rubber
« Reply #1 on: March 09, 2015, 10:25:57 AM »
haha...those are a non-stock PO hack job!  ;D
just cut them out i guess....
rubber grommets for side cover mounting should not have those metal inserts.  How do your side covers mount?  ;D
http://www.partsnmore.com/parts/honda/cb750/?filters%5Bcategory%5D=hardware


the other three hard black plastic are to mount the tank to the frame. They should have smooth metal bushings inside.
« Last Edit: March 09, 2015, 10:29:52 AM by flybox1 »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline SKTP

  • Master
  • *****
  • Posts: 1,791
Re: 1978 CB750K oiltank mount rubber
« Reply #2 on: March 09, 2015, 10:39:54 AM »
Its a 78 Flybox...the oil tank side uses 3 screws to hold on the plastic cover

I think your link is for the MUCH nicer looking 69-76
Logged
1978k rebuild thread http://forums.sohc4.net/index.php?topic=68423.0
BIKE OF THE MONTH - OCTOBER 2017
2003 Ducati M800ie
1997 Honda CR-V
2004 Honda CR-V
1966 Honda S90

Offline SKTP

  • Master
  • *****
  • Posts: 1,791
Re: 1978 CB750K oiltank mount rubber
« Reply #3 on: March 09, 2015, 10:42:09 AM »
http://www.bikebandit.com/oem-parts/1978-honda-cb750k/o/m9458#sch401652

Oh wait?!!! You are right I think...What the heck??!!!!
Logged
1978k rebuild thread http://forums.sohc4.net/index.php?topic=68423.0
BIKE OF THE MONTH - OCTOBER 2017
2003 Ducati M800ie
1997 Honda CR-V
2004 Honda CR-V
1966 Honda S90

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: 1978 CB750K oiltank mount rubber
« Reply #4 on: March 09, 2015, 10:45:41 AM »
Quote from: SKTP on March 09, 2015, 10:42:09 AM
http://www.bikebandit.com/oem-parts/1978-honda-cb750k/o/m9458#sch401652

Oh wait?!!! You are right I think...What the heck??!!!!
I have a '78 as well.
you're method of attaching your sidecovers is what is incorrect ;) ;D
« Last Edit: March 09, 2015, 10:54:12 AM by flybox1 »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: 1978 CB750K oiltank mount rubber
« Reply #5 on: March 09, 2015, 10:59:43 AM »
Aftermarket side covers ??
Logged

Offline mcpuffett

  • Master
  • *****
  • Posts: 2,354
Re: 1978 CB750K oiltank mount rubber
« Reply #6 on: March 09, 2015, 11:02:32 AM »
Maier type side covers use the screw and nut method  ;), just  push the metal insert out of the rubber grommet then push the grommet out of the mounting hole  ;) cheers Mick.
Logged
Honda CB750 KO 1970,   Honda VTX 1300 2006, Lancaster England.

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: 1978 CB750K oiltank mount rubber
« Reply #7 on: March 09, 2015, 11:12:28 AM »
Quote from: mcpuffett on March 09, 2015, 11:02:32 AM
Maier type side covers use the screw and nut method  ;), just  push the metal insert out of the rubber grommet then push the grommet out of the mounting hole  ;) cheers Mick.
something new every day!  ;D
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline SKTP

  • Master
  • *****
  • Posts: 1,791
Re: 1978 CB750K oiltank mount rubber
« Reply #8 on: March 09, 2015, 11:17:48 AM »
I always thought it was odd I needed a screwdriver for the oil-tank sidecover but not the electrical side...I don't even use the oil sidecover...see you later weird metal inserts!
Logged
1978k rebuild thread http://forums.sohc4.net/index.php?topic=68423.0
BIKE OF THE MONTH - OCTOBER 2017
2003 Ducati M800ie
1997 Honda CR-V
2004 Honda CR-V
1966 Honda S90

Offline SKTP

  • Master
  • *****
  • Posts: 1,791
Re: 1978 CB750K oiltank mount rubber
« Reply #9 on: March 09, 2015, 11:18:12 AM »
and as always — thank you everyone. What would I do without you
Logged
1978k rebuild thread http://forums.sohc4.net/index.php?topic=68423.0
BIKE OF THE MONTH - OCTOBER 2017
2003 Ducati M800ie
1997 Honda CR-V
2004 Honda CR-V
1966 Honda S90
Pages: [1]   Go Up
« previous next »