« previous next »
Pages: [1]   Go Down

Author Topic: Front Sprocket Torque F2 SOHC  (Read 391 times)

0 Members and 1 Guest are viewing this topic.

Offline ajduke5

  • Full Member
  • *
  • Posts: 4
Front Sprocket Torque F2 SOHC
« on: March 21, 2015, 08:06:46 AM »
Hi.

I have an F2 SOHC and can't for the life of me find the torque for the centre bolt that holds the front drive sprocket on. It only has the one bolt that goes into the spline, not the two bolt type. I found some mention of 5 kg.m but seems a little high. Last thing I want to do is strip the thread in the spline.

Cheers

Aaron
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: Front Sprocket Torque F2 SOHC
« Reply #1 on: March 21, 2015, 08:21:38 AM »
4.5-5.5kg is correct. shop manual Pg 245  suppliment to 750f pg 22
I'd also use some red locktite
« Last Edit: March 21, 2015, 08:23:22 AM by flybox1 »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Airborne 82nd

  • Expert
  • ****
  • Posts: 828
Re: Front Sprocket Torque F2 SOHC
« Reply #2 on: March 21, 2015, 08:27:48 AM »
Quote from: ajduke5 on March 21, 2015, 08:06:46 AM
Hi.

I have an F2 SOHC and can't for the life of me find the torque for the centre bolt that holds the front drive sprocket on. It only has the one bolt that goes into the spline, not the two bolt type. I found some mention of 5 kg.m but seems a little high. Last thing I want to do is strip the thread in the spline.

Cheers

Aaron

Look at the service manual  the supplement page 261.
32.5-39.8 lbs-ft. This is for a 750 

Logged

Offline ajduke5

  • Full Member
  • *
  • Posts: 4
Re: Front Sprocket Torque F2 SOHC
« Reply #3 on: March 21, 2015, 08:28:58 AM »
Thank you. A little reassurance is always a help. I did read that loctite was a good idea. I'll put some 2700 on and torque it up.
Logged
Pages: [1]   Go Up
« previous next »