« previous next »
Pages: [1]   Go Down

Author Topic: 350F  (Read 937 times)

0 Members and 1 Guest are viewing this topic.

Offline chrisbc55

  • Full Member
  • *
  • Posts: 69
350F
« on: April 28, 2015, 01:51:28 AM »
I have fitted an aftermarket set of rings to my honed bores and cleaned and checked Pistons, they looked good but now wonder if I should have used NOS rings....any opinions?
Cheers
Chris
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: 350F
« Reply #1 on: April 28, 2015, 06:42:49 AM »
can NOS std rings even be found for 350F?
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline chrisbc55

  • Full Member
  • *
  • Posts: 69
Re: 350F
« Reply #2 on: April 28, 2015, 01:06:04 PM »
Yes they are still available for a price if you know where to look
Cheers
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: 350F
« Reply #3 on: April 28, 2015, 01:09:06 PM »
If the ring gap tested OK, and they were installed with the proper orientation, I wouldn't be concerned.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline chrisbc55

  • Full Member
  • *
  • Posts: 69
Re: 350F
« Reply #4 on: April 28, 2015, 11:44:35 PM »
Thanks flybox1
Logged
Pages: [1]   Go Up
« previous next »