Author Topic: 1975/77/94 CB(r)750 K5F  (Read 1778 times)

0 Members and 1 Guest are viewing this topic.

Offline Spleen138

  • Full Member
  • *
  • Posts: 2
1975/77/94 CB(r)750 K5F
« on: May 10, 2015, 06:16:24 PM »
Hey everyone! Hoping you all can give me a hand with some stuff.

I've got a CB750 K5 engine in a CB750F frame with a 94 CBR's front end and swingarm.

I'm struggling with getting the front and rear sprockets lined up; suffering a lot of click and clunk going on as the chain pops itself into place on the front sprocket.

If the front sprocket is not locked down, it walks itself all the way off the shaft. I'm assuming its trying to make it to its happy home in line with the rear, and falling off the shaft before it gets there.

It seems like I need an offset front sprocket (left, away from the engine) and possibly, maybe an offset rear sprocket.

Trouble is, I can't seem to find offset rear sprockets for the cbr wheels, and offset front sprockets are a whopping $95 a piece! (No way, right?)

Can anyone shed any light on this situation?

Online calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,033
  • I refuse...
Re: 1975/77/94 CB(r)750 K5F
« Reply #1 on: May 10, 2015, 07:30:31 PM »
Are both sprockets on the bike currently the same pitch? Are you running a mixed bag perhaps?

You should use a metal straight edge laid against the outside of the sprockets to confirm they're inline or how far out they are. Likely the rear sprocket is much farther left requiring an offset front. CognitoMoto sells offset sprockets, as do many other places. But you need to start with a confirmation that both sprockets are the same pitch.
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Spleen138

  • Full Member
  • *
  • Posts: 2
Re: 1975/77/94 CB(r)750 K5F
« Reply #2 on: May 13, 2015, 09:10:23 AM »
My research tells me that they both came stock with 530 chains, the 75 750K and the CBR. (Edit) Though, I suppose I don't know if someone changed it along the way.

Haven't tried the straight edge trick, but other measurements tell me I need at least 20 mm of offset.

I have only been able to find ~10mm offset front sprockets from various websites.
Someone said there were 20mm offset fronts at cyclex, but it doesn't look like they're listed anymore.

I'm thinking that I'll need to machine down the cbr cush drive, since there is no demand for offset rear sprockets for that wheel.
« Last Edit: May 13, 2015, 09:19:48 AM by Spleen138 »

Online calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,033
  • I refuse...
Re: 1975/77/94 CB(r)750 K5F
« Reply #3 on: May 13, 2015, 03:20:06 PM »
Careful milling the rear sprocket... If you take it too far inboard, the chain will eat the tire.
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis